Sony ECMHW1 Bluetooth Wireless Microphone User Manual

1. Bubuka

The Sony ECMHW1 is a Bluetooth wireless microphone designed to capture high-quality audio for compatible Sony camcorders. Utilizing Bluetooth technology, it allows for wireless audio recording from a distance, enhancing the audio capabilities of your video recordings. This manual provides essential information for the proper setup, operation, and maintenance of your ECMHW1 wireless microphone.

2. Émbaran Kasalametan

Entong ngalaan unit ka suhu anu ekstrim, sinar panonpoé langsung, atanapi kalembaban anu luhur.
Jauhkeun unit tina cai sareng cairan sanés.
Use only the specified AAA batteries. Ensure correct polarity when inserting batteries.
Do not attempt to disassemble or modify the unit. Refer servicing to qualified personnel.
Jauhkeun tina jangkauan barudak.
Dispose of batteries and the product according to local regulations.

3. Eusi Paket

Pastikeun yén sadaya item anu didaptarkeun di handap kalebet kana pakét anjeun:

Mikropon nirkabel (pamancar)
Unit panarima
Armband
Lanyard
Klip
Layar Angin
Mawa Kantong
Battery (2 AAA batteries required, may be included or sold separately)

4. Setélan

4.1. Pamasangan batré

Open the battery compartment on the wireless microphone (transmitter).
Insert two (2) AAA batteries, ensuring the correct positive (+) and negative (-) polarity.
Tutup kompartemen batré anu aman.

Note: The receiver unit draws power directly from the camcorder's Active Interface Shoe and does not require separate batteries.

4.2. Attaching the Receiver to the Camcorder

Locate the Active Interface Shoe (AIS) on your compatible Sony camcorder.
Slide the receiver unit onto the AIS until it clicks into place.
Ensure the receiver is firmly attached to prevent accidental detachment during recording.

Sony ECMHW1 Wireless Microphone Receiver and Transmitter

Gambar 1: The Sony ECMHW1 wireless microphone receiver (left) and transmitter (right). The receiver attaches to the camcorder's Active Interface Shoe, while the transmitter is worn by the subject.

4.3. Pairing the Microphone and Receiver

Turn on your camcorder. This will power on the receiver unit.
Turn on the wireless microphone (transmitter).
The blue indicator lights on both the microphone and receiver should glow solid blue when a successful Bluetooth connection is established. If they flash, pairing is in progress or unsuccessful. Refer to the troubleshooting section if connection issues persist.

5. Parentah Operasi

5.1. Penempatan Mikropon

The wireless microphone (transmitter) can be worn by the subject using the provided accessories:

Klip: Attach the microphone to clothing, such as a lapel or collar, for discreet placement.
Armband: Secure the microphone to the subject's arm, suitable for active scenarios.
Lanyard: Wear the microphone around the neck for easy access and positioning.

For optimal sound quality, position the microphone approximately 6-12 inches (15-30 cm) from the sound source. Use the included wind screen to reduce wind noise when recording outdoors.

5.2. Recording Range

The ECMHW1 offers a wireless range of up to 30 meters (approximately 100 feet) under optimal conditions. Environmental factors such as obstacles, electromagnetic interference, and other Bluetooth devices may affect the effective range.

5.3. 5.1 Channel Surround Sound Recording

When used with compatible camcorders that support 5.1 channel surround sound recording, the ECMHW1 can function as the center channel microphone. This allows for clear capture of the main subject's voice while the camcorder's built-in microphones capture ambient sound, creating an immersive audio experience. Consult your camcorder's manual for specific settings related to 5.1 channel audio input.

6. Pangropéa

beberesih: Wipe the microphone and receiver with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Ngagantian batré: Replace AAA batteries in the transmitter when the indicator light shows low power or the connection becomes unstable. Always use fresh batteries.
Panyimpenan: When not in use, store the microphone and receiver in the provided carrying pouch in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.

7. Cara ngungkulan

Masalah	Mungkin Cukang lantaranana	Solusi
Teu aya audio atanapi kualitas audio anu goréng.	Mikropon teu dihurungkeun. Batré lemah atawa béak. Mikropon sareng panarima teu dipasangkeun. Kaluar jangkauan. Halangan antara mikropon sareng panarima. Gangguan tina alat nirkabel anu sanés.	Ensure the microphone is switched on. Replace AAA batteries in the microphone. Re-pair the microphone and receiver (refer to Section 4.3). Reduce the distance between the microphone and receiver. Ensure a clear line of sight. Jauhan tina alat nirkabel anu sanés atanapi sumber gangguan.
Blue indicator light flashes.	Not paired or connection lost. Low battery in microphone.	Pastikeun duanana unit diaktipkeun sareng dina jangkauan. Masangkeun deui parangkat. Ganti batré mikropon.
Receiver teu powering on.	Camcorder not powered on. Receiver not properly attached to AIS.	Hurungkeun camcorder. Re-attach the receiver firmly to the Active Interface Shoe.

8. Spésifikasi

Jumlah modél: ECMHW1
merek: Sony
Téknologi konektipitas: Bluetooth
Tipe Panyambung: Nirkabel
Alat anu cocog: Camcorder (Sony DVR-DVD405, 505, HDR-SR1, UX1 & DCR-SR60, SR80, SR100 Camcorders)
warna: Hideung
Faktor Bentuk Mikropon: Lavalier
Sumber Daya: Battery Powered (Transmitter), Camcorder (Receiver)
Number of Batteries (Transmitter): 2 batré AAA diperlukeun
Rasio Signal-to-Noise: 100 dB
Jumlah Saluran: 5 (for 5.1 channel recording)
Beurat barang: 0.6 Pon (kira-kira 272g)
Item Dimensi: 4.8 x 6.5 x 3.5 inci (kira-kira 12.2 x 16.5 x 8.9 cm)
Pabrikan: Sony

9. Garansi jeung Rojongan

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Sony support websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.