Bubuka
This manual provides detailed instructions for the installation, operation, and maintenance of your Veise VE017 Fingerprint Smart Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and safety. The Veise VE017 offers advanced security and convenience with multiple access methods including fingerprint, PIN code, key fobs, and traditional keys, all manageable via a smart app.
Naon dina Box
Sateuacan ngamimitian pamasangan, mangga pariksa yén sadaya komponén aya:
- Majelis Luar
- Majelis interior
- Panutup batré
- Kartu Pamaké x2
- Reset Alat x1
- Leutik x1
- Konci mékanis x2
- Reinforcement Plate (optional)
- neunggeul
- Strike Screws x5 (2 Spare)
- Sekrup Kancing x2
- Pamasangan Plat Screws x2
- Kerah Drive-In (Opsional)
- Lempeng Pamasangan x1
Guide instalasi
Important Notes for Installation:
- It is strongly recommended to keep the door open or ajar during installation.
- Do not close the door before inserting the batteries.
- Do not insert the batteries until the lock is fully installed.
Step 1: Measure the Dimensions
Sateuacan meuliasing and installing, ensure your door dimensions are compatible with the lock. Measure the hole spacing and door thickness.
- Backset: 2-3 / 8 "atanapi 2-3 / 4" (60mm atanapi 70mm)
- Diaméter liang: 1-1/2" nepi ka 2-1/8" (38mm nepi ka 54mm)
- Ketebalan Panto: 1-3/8" or 2" (35mm or 50mm). Door thickness out of spec may prevent lock operation.
- Latch Hole Depth: 1" (25mm). Ensure the door frame is aligned with the door. Verify there are no obstructions in the door frame. The hole in the door frame must be drilled to a minimum depth of 1" (25 mm).
Lengkah 2: Pasang Latch sareng Strike
Install the latch into the door edge. Ensure the "up" marking on the latch is correctly oriented. Confirm the type of hole in the edge of the door frame.
penting:
The latch bolt should be fully retracted (in the unlocked position) before proceeding.
For doors with 1-1/2" (38mm) holes, temporarily install the Latch bolt to test if it fits properly. If the Latch bolt is stuck, you need to extend the Latch hole by at least 13/64" (5mm) deep using a 1" (25.4mm) Drill Bit.
Lengkah 3: Pasang Majelis Exterior
Route the cable below the latch and insert the torque blade through the slot in the latch. Install the mounting plate, ensuring it is parallel to the door edge and screws are not overtightened.
Lengkah 4: Pasang Majelis Interior
Disassemble the battery cover. Insert the cable connector into the socket, pushing firmly until fully seated. Align the torque blade with the knob hole, ensuring the knob holes are parallel. Attach the interior assembly to the mounting plate and tighten the 3 screws. Finally, insert 4 AA Alkaline batteries.
penting:
Do not install the batteries until the lock is fully installed. Be sure not to use the wrong screws, or it may lead to short-circuit and other problems.
Step 5: Reset the Lock
Using the reset tool, press and hold the reset button for 5 seconds until you hear "Restored to factory settings" and a "BEEP". This indicates a successful reset, and the latch will extend automatically. After the reset, the lock automatically recognizes the left and right doors. Attach the battery cover.
Instalasi Video
For a visual guide, please watch the official installation video:
Parentah Operasi
Multiple Access Methods
The Veise VE017 Smart Door Lock offers 5 convenient access methods:
- Sidik jari: Quick and secure biometric access.
- Kodeu PIN: Customizable numerical codes for entry.
- Key Fobs: RFID-enabled cards for tap-to-unlock convenience.
- Konci Cadangan: Traditional mechanical key for emergency backup.
- KK Home App Control: Manage your lock remotely via the smartphone application.
Smart App and Web Gerentes
Manage your lock's features and access permissions using the dedicated smartphone app or web manager. This allows for comprehensive control over your door security.
- Atur Pamaké: Add or remove users and their access credentials.
- Access Time Logs: View a history of who entered and when.
- Grant Remote Access Offline: Provide temporary access even when not connected to the internet.
- Kasaluyuan: The lock is compatible with Alexa and Google Home for integrated smart home control.
Multiple PIN Code Types
The smart lock supports various types of PIN codes to suit different access needs:
- Remote Unlimited One-Time PIN Code: For single-use access.
- Remote Unlimited Duration PIN Code: For access within a specified time frame.
- Kode PIN Permanén: For regular, unrestricted access.
- Kode PIN anu Kaulang: For scheduled, repeated access (e.g., for cleaners).
Pangropéa
To ensure the longevity and optimal performance of your Veise VE017 Smart Door Lock, follow these maintenance guidelines:
- Ngagantian batré: The lock uses 4 AA Alkaline batteries. Replace all batteries when the low battery indicator appears or when the lock's response time slows down. Always use new, high-quality alkaline batteries.
- beberesih: Bersihkeun bagian luar konci nganggo lap anu lemes,amp lawon. Ulah nganggo pembersih atanapi pangleyur anu abrasif anu tiasa ngaruksak lapisan atanapi komponén éléktronik.
- Sensor sidik: Keep the fingerprint sensor clean and free of dirt or oils for accurate readings.
- Papan tombol: Regularly wipe the keypad to prevent grime buildup.
- Komponén mékanis: Periodically check the latch and strike plate for any obstructions or wear. Ensure the latch moves freely.
- Apdet parangkat lunak: Keep the associated smartphone app updated to the latest version to benefit from new features, security enhancements, and bug fixes.
Pamérésan masalah
If you encounter issues with your Veise VE017 Smart Door Lock, consider the following common troubleshooting steps:
- Konci Teu Ngabales:
- Pariksa batréna. Ganti upami batréna béak atanapi béak.
- Ensure the battery cover is securely attached and the cable connector is fully seated.
- Perform a factory reset (refer to Step 5 in the Installation Guide).
- Sidik ramo Teu Dipikawanoh:
- Pastikeun ramo anjeun beresih jeung garing.
- Try re-registering your fingerprint in the app.
- Bersihkeun permukaan sensor sidik jari.
- PIN Code Not Working:
- Pastikeun anjeun ngasupkeun kode PIN anu leres.
- Check the PIN code's validity period (for duration or one-time codes) in the app.
- Ensure the keypad is clean and responsive.
- Masalah Konektipitas Aplikasi:
- Ensure Bluetooth is enabled on your smartphone and you are within range of the lock.
- Balikan deui aplikasi sareng/atawa smartphone anjeun.
- Pariksa apdet aplikasi.
- If using Wi-Fi gateway (sold separately for remote access), ensure it is properly connected and configured.
- Latch Bolt Stuck:
- Ensure the latch hole in the door frame is deep enough and free of obstructions (refer to Step 1 and 2 of Installation).
- Check if the torque blade is correctly aligned with the knob hole (refer to Step 4 of Installation).
Upami léngkah-léngkah ieu henteu ngabéréskeun masalah, mangga ngahubungi dukungan palanggan.
spésifikasi
| Atribut | Nilai |
|---|---|
| Ngaran Brand | Veise |
| Modél | VE017 |
| Sasayogian tanaga | BATERI GARING |
| Métode Pamasangan | Pamasangan pangeboran |
| Nanganan Arah | Arah Malik |
| Tipe rengse | Minyak Dibungkus |
| Fungsi Doorknob | Konci & Keypad |
| Cara Pikeun Buka Konci | Konci mékanis |
| Asalna | Daratan Cina |
| Hign-merhatikeun Kimia | Euweuh |
Garansi sareng Rojongan
If you have any questions or require assistance with your Veise VE017 Smart Door Lock, please contact our customer support team first.
- Tol Gratis: +1 (855) 400-3853 (AS)
- kasadiaan: Senén - Jumaah, 9:00 - 5:00 PST
- Surélék: support@iveise.com (24/7 email support)
Please refer to the product packaging or official Veise websitus pikeun detil jaminan husus.
