ThermoPro TP210B Digital Wireless Refrigerator and Freezer Thermometer

1. Bubuka

Hatur nuhun pikeun meuliasing the ThermoPro TP210B Digital Wireless Refrigerator and Freezer Thermometer. This device is designed to help you monitor the temperature of your refrigerator and freezer wirelessly, ensuring your food is stored at safe temperatures. This manual provides detailed instructions on how to set up, operate, and maintain your thermometer.

2. Eusi Paket

Mangga parios heula sadaya barangna sareng dina kaayaan anu saé:

• 1 x Unit panarima
• 2 x Transmitter Units
• 2 x AAA Batteries (for Receiver)
• 1 x USB Charging Cable (for Transmitters)
• 1 x Manual Pamaké

3. Fitur Produk

• Pangimeutan nirkabel: Monitor temperatures up to 500 feet (150 meters) away in open space using RF technology.
• Akurasi luhur: Provides temperature readings with an accuracy of ±0.9°F (±0.5°C) within the range of 32°F-122°F (0°C-50°C), and ±1.8°F (±1.0°C) otherwise.
• Rentang Ukur Lebar: Ngukur suhu ti -40.0°F nepi ka 158.0°F (-40°C nepi ka 70°C).
• Layar LCD Backlit ageung: Easy-to-read display with backlight for clear visibility in various lighting conditions.
• Rékam MAX/MIN: Tracks and displays the maximum and minimum temperatures recorded.
• Tanda Suhu: Customizable high/low temperature alarms for both refrigerator and freezer.
• Indikator batré lemah: Alerts you when batteries need replacement or recharging.
• Sababaraha Pilihan Pasang: Receiver can be magnetic mounted, table stood, or hung. Transmitters can stand or clip.
• Rechargeable Transmitters: Transmitters use rechargeable lithium batteries, ideal for low-temperature environments.

4. Setup Guide

4.1 Masang Batré

1. Unit panarima: Open the battery compartment on the back of the receiver. Insert 2 AAA batteries, ensuring correct polarity (+/-). Close the compartment.
2. Transmitter Units: The transmitters come with built-in rechargeable lithium batteries. Before first use, ensure they are fully charged using the provided USB charging cable. Connect the cable to the transmitter and a USB power source (e.g., computer, USB wall adapter). The charging indicator will show status.

4.2 Pairing Transmitters with Receiver

The transmitters and receiver are pre-paired at the factory. If they do not connect automatically, follow these steps:

1. Place the receiver and transmitters close to each other.
2. Ensure both receiver and transmitters are powered on.
3. The receiver should automatically display temperature readings from the transmitters. If not, refer to the troubleshooting section.

4.3 Nempatkeun na Mounting

Choose appropriate locations for your receiver and transmitters:

• panarima: Can be placed on a countertop using its table stand, hung on a wall, or attached to a metallic surface (like a refrigerator door) using its magnetic back.
• Pamancar: Place one transmitter in the refrigerator and another in the freezer. They can stand on a shelf or clip onto a rack. Ensure they are not obstructed by large items to maintain signal strength.

5. Operasi

5.1 Pidangkeunview

The receiver's LCD displays current temperatures, MAX/MIN records, low battery indicators, and alarm status for both channels (refrigerator and freezer).

5.2 Fungsi Tombol

• MODÉ: Cycles through different display modes or enters settings.
• NAEK TURUN: Adjusts values when setting alarms or other parameters.
• HISTORY/CLEAR: Displays MAX/MIN temperature records. Press and hold to clear records.
• LIGHT/°F/°C: Toggles backlight. Press and hold to switch between Fahrenheit (°F) and Celsius (°C).

5.3 Nyetél Bewara Suhu

The device can alert you if temperatures go above or below your set thresholds.

1. Pencét éta MODÉ button until the alarm setting icon appears for the desired channel (refrigerator or freezer).
2. Ngagunakeun éta UP jeung TURUN buttons to set your desired high and low temperature limits.
3. Pencét MODÉ again to confirm and move to the next setting or exit.
4. An alarm will sound if the temperature exceeds these limits.

6. Pangropéa

6.1 Manajemén batré

• panarima: Ganti batré AAA nalika indikator batré lemah némbongan dina layar.
• Pamancar: Recharge the lithium batteries using the provided USB cable when the low battery indicator for the respective channel appears.

6.2 beberesih

Lap unit-unitna nganggo iklanamp cloth. Do not immerse in water or use abrasive cleaners. Ensure all units are dry before use.

7. Cara ngungkulan

• No Temperature Reading / Disconnected:
  • Ensure both receiver and transmitters have sufficient battery power.
  • Move the receiver closer to the transmitters. The maximum wireless range is 500 feet in open space, but walls and appliances can reduce this.
  • Try re-pairing the units by turning them off and on again, or following specific pairing instructions if available in the full manual.
• Bacaan teu akurat:
  • Ensure transmitters are placed away from direct airflow vents or heating elements.
  • Allow units to stabilize for at least 30 minutes after placement.
• Alarm disada teu disangka-sangka:
  • Check if the refrigerator/freezer door was left open, causing a temperature fluctuation.
  • Verify your set high/low alarm thresholds.

8. Spésifikasi

9. Tips pamaké

• For optimal wireless performance, try to minimize physical obstructions (thick walls, large metal appliances) between the receiver and transmitters.
• Regularly check the battery indicators on the receiver to ensure continuous monitoring.
• Place transmitters in the warmest part of your refrigerator/freezer to get the most critical temperature readings, typically near the door.
• Utilize the MAX/MIN record feature to track temperature fluctuations over time, which can indicate issues with your appliance.

10. Garansi jeung Rojongan

10.1 Émbaran jaminan

Produk ieu hadir kalawan a garansi 2 taun from the date of purchase. During this period, if the product fails due to manufacturing defects, it will be repaired or replaced at no charge. This warranty does not cover damage caused by misuse, accident, unauthorized modification, or normal wear and tear.

10.2 Rojongan Palanggan

For any questions, technical support, or warranty claims, please contact our customer service team:

• Surélék: 19174828628@163.com
• WhatsApp/WeChat: +86 13307499106

Please provide your model number (TP210B) and a detailed description of the issue when contacting support.