GIGABYTE H310M D2P LGA 1151 Motherboard User Manual

1. Bubuka

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your GIGABYTE H310M D2P Micro-ATX motherboard. Designed for desktop applications, this motherboard supports 8th and 9th generation Intel Core processors with an LGA 1151 socket, offering robust performance for various usage scenarios including gaming, audio & video editing, office tasks, scientific computing, and 3D modeling.

2. Setup jeung Instalasi

Sateuacan ngamimitian pamasangan, pastikeun sistem anjeun dipareuman sareng dipegatkeun tina sumber listrik. Nanganan motherboard ku edges na ulah ngurangan statik.

2.1. Pamasangan CPU

1. Tangtukeun lokasi stop kontak LGA 1151 CPU dina motherboard nu.
2. Gently angkat tuas beban tur buka panutup stop kontak CPU.
3. Align the notches on your 8th or 9th generation Intel Core processor (e.g., i3, i5, i7, i9, G4900) with the socket. Carefully place the CPU into the socket without forcing it.
4. Tutupkeun panutup stop kontak teras pencét tuas beban ka handap dugi ka konci dina tempatna.

2.2. Pamasangan mémori (RAM).

1. Identify the two DDR4 DIMM slots on the motherboard.
2. Buka klip dina kadua tungtung slot DIMM.
3. Align kiyeu dina modul memori DDR4 jeung konci dina slot DIMM.
4. Selapkeun modul memori pageuh kana slot nepi ka jepitan snap kana tempat. Pastikeun duanana klip ditutup.

2.3. Pamasangan Alat Panyimpenan

• drive SATA: Connect your SATA 3 hard drives or SSDs to the available SATA ports using SATA data cables. Connect the power cables from your power supply to the drives.
• M.2 NVMe SSD: Locate the M.2 slot. Insert your M.2 NVMe SSD at an angle and then gently push it down. Secure it with the provided screw.

2.4. Nyambungkeun Periferal jeung Power

1. Connect the 24-pin ATX main power connector and the 8-pin ATX 12V power connector from your power supply to the corresponding sockets on the motherboard.
2. Connect front panel headers (power button, reset button, HDD LED, power LED) to the F_PANEL header.
3. Connect USB 2.0/3.0 headers, audio headers, and any other case connectors.
4. Pasang tameng I/O kana wadah komputer anjeun.
5. Mount the motherboard into the case, securing it with screws.
6. Connect external peripherals to the rear I/O ports.

3. Parentah Operasi

3.1. Boot munggaran

After completing all hardware installations, connect your monitor, keyboard, and mouse. Power on your system. The system should boot to the BIOS/UEFI interface or begin the operating system installation process if a bootable drive is detected.

3.2. BIOS / UEFI Setup

To enter the BIOS/UEFI setup, press the designated key (usually DEL or F2) during the boot process. Here you can configure boot order, system time, CPU settings, memory settings, and other advanced features. Refer to the GIGABYTE website for detailed BIOS/UEFI documentation specific to your motherboard model.

3.3. Pamasangan supir

After installing your operating system, install the necessary drivers for the chipset, LAN, audio, and any other integrated components. These drivers are typically available on the GIGABYTE support websitus pikeun model motherboard husus Anjeun.

4. Pangropéa

• Tetep Bersih: Regularly clean your computer case and motherboard to prevent dust buildup, which can lead to overheating and component failure. Use compressed air to remove dust from fans and heatsinks.
• Pariksa sambungan: Periodically check all power and data cable connections to ensure they are secure.
• Pembaruan BIOS: Keep your BIOS/UEFI firmware updated to ensure optimal performance, compatibility, and security. Download updates only from the official GIGABYTE websitus.
• Pangimeutan Suhu: Anggo parangkat lunak pangimeutan sistem pikeun ngawaskeun suhu CPU sareng chipset supados nyegah panas teuing.

5. Cara ngungkulan

If you encounter issues with your motherboard, try the following basic troubleshooting steps:

• Henteu aya kakuatan: Ensure all power cables (24-pin ATX, 8-pin ATX 12V) are securely connected to the motherboard and power supply. Verify the power supply is switched on.
• Henteu aya tampilan: Check that your monitor is connected to the correct video output on the motherboard or graphics card. Reseat RAM modules and ensure they are properly installed.
• Instabilitas Sistem / Kacilakaan: This can be caused by various factors. Ensure all components are properly seated. Check for overheating. Run memory diagnostic tools to test RAM integrity.
• Masalah periferal: If a specific peripheral (e.g., USB device, LAN) is not working, ensure its drivers are installed and updated. Try connecting it to a different port.
• Reset BIOS: If system settings become corrupted, you can reset the BIOS to default settings. This is usually done by clearing the CMOS battery or using a jumper on the motherboard. Consult the GIGABYTE websitus pikeun parentah husus.

6. Spésifikasi

7. Tips pamaké

• Always refer to the official GIGABYTE website for the latest drivers and BIOS updates to ensure optimal performance and compatibility.
• When installing the CPU, ensure proper alignment and avoid applying excessive force to prevent damage to the pins or socket.
• For best performance, install RAM modules in the recommended slots as per the motherboard's specific guidelines (usually indicated in the full manual or on the board itself).
• Ensure adequate airflow within your PC case to maintain optimal operating temperatures for all components.

8. Garansi jeung Rojongan

Kanggo inpormasi jaminan lengkep sareng dukungan téknis, mangga tingal GIGABYTE resmi website or contact GIGABYTE customer service directly. Keep your proof of purchase for any warranty claims.