Bubuka
The Ulanzi LA10 is a compact and portable 2.4GHz mini flash trigger designed for off-camera flash control. It features a universal hot shoe mount, Type-C charging, and offers reliable triggering up to 8 meters. This manual provides detailed instructions for setting up, operating, and maintaining your LA10 flash trigger.
Video: Ulanzi LA10 Mini Flash Trigger product overview and demonstration.
Eusi pakét
Mangga parios pakét pikeun mastikeun yén sadaya barang aya:
- Flash Trigger *1
- C to C Charging Cable *1
- Buku Panduan *1
Image: Contents of the Ulanzi LA10 Mini Flash Trigger package.
Produk Leuwihview
Familiarize yourself with the components of the Ulanzi LA10 Mini Flash Trigger:
Image: Labeled diagram of the Ulanzi LA10 Mini Flash Trigger components.
- Tipe-C Port: Pikeun ngecas alat.
- Standard Single-Contact Hot Shoe: For mounting on cameras or flashes.
- Mode Switch (TX/RX): To switch between Transmitter (TX) and Receiver (RX) modes.
- Tombol Daya/Pasangan: To power on/off and initiate pairing.
Disetél
1. Ngecas Alat
The LA10 has a built-in 3.7V 200mAh battery. Before first use, or when the battery is low, charge the device using the provided Type-C to C charging cable.
- Connect the Type-C cable to the LA10's Type-C port and a 5V=0.5A power source.
- Waktu ngecas kirang langkung 3 jam.
- The device supports external power banks for continuous power during use.
Image: Ulanzi LA10 connected for Type-C charging.
2. Mounting the Flash Trigger
The LA10 features a universal single-contact hot shoe for broad compatibility with most digital cameras and flash lights.
- Slide the LA10 onto your camera's hot shoe or a compatible flash unit's hot shoe.
- Ensure it is securely seated.
Image: Ulanzi LA10 mounted on a camera hot shoe.
Image: Compatibility diagram for the universal hot shoe mount. Compatible with cameras featuring a center contact on the hot shoe. Note: Some Canon models (1500D, 2000D, 3000D Mark II, R50) do not include this universal contact and are not supported.
Parentah Operasi
1. Power On / Pareum sarta Pamilihan Mode
- Daya Hurung: Press and hold the Power/Pairing button until the indicator light turns on.
- Pareum listrik: Press and hold the Power/Pairing button until the indicator light turns off.
- Pilihan Mode: Use the TX/RX mode switch to select Transmitter (TX) or Receiver (RX) mode.
2. Pairing for Off-Camera Flash
The LA10 allows for easy pairing to control off-camera flashes wirelessly. The stable 2.4GHz wireless connection ensures consistent flash performance free from interference, with a trigger range of up to 8 meters.
Image: Step-by-step visual guide for pairing the LA10 units.
- Power on two or more units. Set one unit as a transmitter (TX) and the others as receivers (RX) using the mode switch.
- On receiver units: Press the power/pairing button five times. The indicator will flash red and green alternately to enter pairing mode.
- On transmitter unit: Single press the power/pairing button. A solid green light on both the transmitter and receiver confirms successful pairing.
3. Single-Light Triggering
For a single off-camera flash setup, mount one LA10 unit on your camera (TX mode) and another on your flash unit (RX mode), then pair them as described above.
Image: Illustration of single-light triggering for both on-camera and off-camera flash scenarios.
4. Multi-Light Setup
The LA10 supports controlling multiple receiver units with a single transmitter, allowing for complex multi-light setups and creative lighting effects.
Gambar: Examples of dual-light and three-light setups using the LA10 system.
5. Hot Shoe Riser Function
When using the LA10 with an on-camera flash, it acts as a hot shoe riser, elevating the flash position by 18mm. This helps to prevent shading caused by larger lenses, ensuring cleaner lighting in your photos.
Image: Demonstration of the LA10's hot shoe riser function. Note: When using large lenses or camera cages, some shading may still occur depending on your specific setup.
Pangropéa
- Keep the device dry. Do not handle with wet hands.
- Bersihkeun alat ku kaen anu lemes sareng garing. Hindarkeun ngagunakeun bahan kimia anu kasar atanapi bahan abrasive.
- Simpen alat dina tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
- Hindarkeun ragrag atanapi ngagentoskeun alat kana tabrakan anu kuat.
Pamérésan masalah
- Alat teu hurung: Ensure the battery is charged. Connect to a Type-C power source and try again.
- Ngapasangkeun gagal: Ensure both units are in the correct TX/RX mode and follow the pairing steps precisely. Check that the indicator lights respond as described.
- Flash not triggering: Verify that the LA10 is securely mounted on both the camera and flash. Ensure the flash unit itself is powered on and set to a compatible mode (e.g., manual flash). Check the trigger range (up to 8m).
- Incompatibility with flash/camera: The LA10 uses a standard single-contact hot shoe. Some camera or flash models, particularly certain Canon models (e.g., 1500D, 2000D, 3000D Mark II, R50), may not have this contact and are therefore not supported. Always check your equipment's hot shoe type for compatibility.
spésifikasi
| Fitur | Spésifikasi |
|---|---|
| merek | Ulanzi |
| Modél | LA10 |
| Diménsi | 3.17*2.86*2.61cm / 1.25*1.13*1.03in |
| Beurat | Kira-kira. 20g / 0.71 oz |
| Diwangun-di Wireless | 2.4GHz |
| Kapasitas batré | 3.7 V 200 mAh |
| Rentang pemicu | Nepi ka 8m |
| Input Tipe-C | 5V = 0.5A |
| Waktu Ngecas | Kira-kira. 3 jam |
| Modeu Operasi | Pemancar (TX), Panarima (RX) |
| Runtime | Approx. 60 hours (TX), 6 hours (RX) |
| Otomatis Daya-Pareuman | 10 minutes (after inactivity) |
*The above specifications are based on Ulanzi laboratory testing, provided for reference only. Product specifications are subject to change without prior notice.
Image: Detailed specifications and physical dimensions of the Ulanzi LA10.
Tip pamaké
- Check Hot Shoe Type: Sateuacan meuliasing or using with new equipment, always verify that your camera or flash has a standard single-contact hot shoe for compatibility.
- Kahirupan batré: For extended shoots, especially when using the unit as a receiver (6 hours runtime), consider carrying a power bank and the Type-C cable for continuous power. The transmitter mode offers significantly longer runtime (60 hours).
- Otomatis Pareum: The 10-minute auto power-off feature helps conserve battery. Remember to power it back on if it has been inactive.
Garansi sareng Rojongan
Produk Ulanzi dirancang pikeun reliabilitas sareng kinerja. Pikeun inpormasi garansi, dukungan téknis, atanapi patarosan layanan, mangga tingal Ulanzi resmi. websitus atanapi ngahubungan dealer otorisasi Anjeun. Simpen resi pameseran anjeun salaku bukti pameseran.
