T-Deck Plus ESP32-S3 GPS LoRaWAN + LCD Module User Manual

Bubuka

This manual provides comprehensive instructions for the setup, operation, and maintenance of your LILYGO T-Deck Plus module. The T-Deck Plus is a versatile development board featuring an ESP32-S3 microcontroller, integrated GPS, LoRaWAN communication capabilities, and a vibrant LCD display, along with a QWERTY keyboard and trackball for user interaction. Please read this manual carefully before using the device to ensure optimal performance and longevity.

Produk Leuwihview

The LILYGO T-Deck Plus combines several powerful features into a compact form factor, making it ideal for various IoT and communication projects. Key components include:

• ESP32-S3FN16R8 Dual-core LX7 Microprocessor
• 2.8-inch ST7789 SPI IPS LCD (320x240 resolution, full viewsudut)
• SX1262 LoRa Low-Power Transceiver (supporting 433/868/915MHz)
• Integrated GPS module
• QWERTY Keyboard and Trackball
• Mikropon sareng Speaker
• Slot Kartu TF
• Diwangun-di Batré 2000mAh

Disetél

1. Eusi Paket

Pastikeun yén sadaya komponén aya:

• T-Deck Plus Module
• LoRa Antenna (if external antenna version)
• USB-C Cable (not explicitly mentioned but standard for such devices)

2. Attaching the LoRa Antenna (External Antenna Version)

If your T-Deck Plus module comes with an external LoRa antenna, carefully screw it onto the antenna connector located at the top of the device. Do not overtighten.

3. Powering on / Pareum

The T-Deck Plus has a built-in 2000mAh battery. To power on the device, locate the power switch (refer to Figure 5 for location). To charge the device, connect a USB-C cable to the USB-C port.

4. Pinout and Component Identification

Understanding the pinout and component layout is crucial for advanced development and connectivity. Refer to the diagram below for detailed pin assignments and component locations.

Key Pin Assignments and Components:

• LCD (ST7789 320x240): DC-I011, MOSI-I041, BL-I042, MISO-I038, SCK-I040, Touch-I016
• Kartu TF: MOSI-I041, MISO-I038, SCK-I040, CS-I039
• Manajemén kakuatan: POWER_ON-I010, BAT ADC-I004 (for battery detection)
• GPS: RX(44), TX(43)
• SX1262 LoRa Module: SCK-I040, MISO-I038, MOSI-I041, DIO1-I045, Reset-I017, Busy-I013
• Trackball: UP I002, LEFT I001, Boot I000, RIGHT I015, DOWN I003
• Lain: Microphone, Speaker, Keyboard, AUX connector for extended antenna use, 1/4-inch nut for mounting.

Parentah Operasi

1. Pamaké Interface Napigasi

The T-Deck Plus features a 2.8-inch LCD, a QWERTY keyboard, and a trackball for interaction.

• LCD: Displays information and menu options.
• kibor: Used for text input and command execution.
• Trackball: Navigate through menus and select options. The trackball has directional inputs (UP, DOWN, LEFT, RIGHT) and a central 'Boot' button (I000).

Common menu options visible on the screen include "Scour", "Dis", "GPS", "KB" (Keyboard), "SETT" (Settings), "Rx" (Receive), "Message", "TX" (Transmit), and "Radio Configure".

2. LoRaWAN Communication

The integrated SX1262 LoRa module supports various frequencies. Ensure your device is configured for the correct frequency band for your region (433MHz, 868MHz, or 915MHz). The transmit power is +22dBm.

Use the "Radio Configure" option in the menu to set up LoRa parameters.

3. Fungsi GPS

The T-Deck Plus includes a GPS module. Access GPS-related functions through the "GPS" menu option. Ensure the device has a clear view langit pikeun panarimaan satelit optimal.

4. Pamakéan Kartu TF

Insert a TF (microSD) card into the designated slot for data storage, logging, or custom firmware. Ensure the card is formatted correctly (e.g., FAT32) before use.

5. Fitur Audio

The module is equipped with a microphone and speaker, enabling audio input and output. These can be utilized for various applications, such as voice communication or sound recording, depending on the loaded firmware.

Pangropéa

• beberesih: Anggo lawon anu lemes sareng garing pikeun ngabersihkeun alat. Hindarkeun nganggo cairan atanapi pembersih anu abrasif.
• Panyimpenan: Simpen alat dina tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
• Perawatan batré: For long-term storage, charge the battery to approximately 50% to prolong its lifespan. Avoid fully discharging the battery for extended periods.
• Pembaruan firmware: Regularly check for firmware updates from the manufacturer to ensure optimal performance and access to new features.

Pamérésan masalah

Alat teu hurung:

• Ensure the battery is charged. Connect the device to a power source using a USB-C cable.
• Pastikeun saklar daya aya dina posisi ON.

LoRa communication issues:

• Check if the LoRa antenna is securely attached (for external antenna versions).
• Confirm that the LoRa frequency is correctly configured for your region.
• Ensure both transmitting and receiving devices are within range and on the same frequency.

sinyal GPS teu kaala:

• Pindahkeun alat ka tempat anu kabuka kalayan cahaya anu jelas view ti langit.
• Allow sufficient time for the GPS module to acquire satellite signals (first fix can take longer).

tampilan LCD teu jalan:

• Balikan deui alat.
• Ensure the device is powered on and the battery is not critically low.

spésifikasi

Tip pamaké

No specific user tips are available from reviews or Q&A at this time. However, general tips for development boards include:

• Always ensure correct wiring when connecting external components to avoid damage.
• Mimitian ku mantan anu saderhanaamples provided by the development environment (Arduino, PlatformIO-IDE, Micropython) to familiarize yourself with the module's capabilities.
• Join online communities or forums related to ESP32-S3 and LoRaWAN for support and project ideas.

Garansi sareng Rojongan

Kanggo inpormasi garansi sareng dukungan téknis, mangga tingal resmi produsén websitus atanapi hubungi tempat pameseran anjeun. Simpen bukti pameseran anjeun pikeun klaim garansi naon waé.