1. Bubuka
Thank you for choosing the Haozee 24G Zigbee MmWave Human Presence Sensor. This advanced smart home device offers comprehensive human presence detection, motion sensing, and environmental monitoring. The 4-in-1 model integrates 24GHz mmWave radar, Passive Infrared (PIR) motion sensing, ambient light detection, and temperature and humidity sensing. It is designed to work seamlessly with Home Assistant via Zigbee2MQTT, providing reliable data for intelligent automation and enhanced comfort in your living spaces.
2. Émbaran Kasalametan
- Read this manual carefully before use to ensure correct operation and avoid device damage.
- Ulah ngalaan alat ka suhu ekstrim, kalembaban, atawa sinar panonpoé langsung.
- Use only specified power sources (USB DC 5V/>100mA or LR03 AAA X2 batteries).
- Do not use rechargeable AAA batteries with this device.
- Pastikeun polaritasna batré anu bener nalika instalasi.
- Avoid installing the device in areas with strong airflow or near constantly moving objects to prevent false alarms.
- Alat ieu sanés cocooan. Jauhkeun tina jangkauan barudak.
3. Eusi Paket
Mangga cék kotak pikeun item di handap ieu:
- 1 × ZigBee Sensor (Battery and Type-C cable not included)
- 1 × Buku Panduan
- 2 × pita dua sisi
- 1 × Mounting bracket (may vary by version)
4. Spésifikasi
| Atribut | Nilai |
|---|---|
| Ngaran Brand | Haozee |
| Asalna | Daratan Cina |
| Adaptor kakuatan | USB DC 5V / >100mA |
| Jenis Batré | LR03 AAA X2 (not included) |
| Operasi Voltage | DC 3V |
| Arus Tenang | <65uA |
| Rentang katerangan | 0~3500x |
| Protokol Komunikasi | Zigbee3.0 |
| Frékuénsi Radar | 24 GHz ISM |
| Suhu Operasi & Kalembaban | -10°C~55°C <95% RH |
| Motion Detection Range (PIR) | Nepi ka 5 méter |
| Stationary Detection Range (mmWave) | Nepi ka 3.5 méter |
5. Setélan
5.1. Komponén Liwatview
5.2. Powering Alat
The sensor can be powered by either AAA batteries or a Type-C USB cable.
5.2.1. Pamasangan batré
- Push down the rear cover of the device to open the battery compartment.
- Insert 2 LR03 AAA batteries, ensuring correct positive (+) and negative (-) polarity.
- Snap the back cover of the bracket into the main body and push it upwards to secure.
Note: Batteries are not included. Do not use rechargeable batteries.
5.2.2. Type-C USB Power
Connect a Type-C USB cable (not included) to the USB power interface on the sensor and to a USB DC 5V/>100mA power adapter. When using Type-C power, the batteries (if installed) will automatically stop working to save power.
5.3. Pasang Sénsor
The sensor can be mounted using the provided double-sided tape or screws.
- Using Double-sided Tape: Clean the desired surface thoroughly. Apply the two pieces of double-sided tape to the back of the sensor or its mounting bracket, then firmly press the device onto the wall.
- Ngagunakeun Screws: Use the mounting bracket (if included) and appropriate screws to fix the device securely to the wall.
Important: Ensure the sensing surface is aligned with the area you wish to monitor. Avoid placing the sensor where it might be affected by strong air currents (e.g., near vents) or constantly moving objects (e.g., curtains) to prevent false detections.
5.4. Masangkeun sareng Zigbee Gateway
A Zigbee 3.0 Hub (gateway) is required for the sensor to function and connect to your smart home system (e.g., Home Assistant via Zigbee2MQTT).
- Ensure your Zigbee gateway is powered on and in pairing mode. Refer to your gateway's manual for specific instructions on how to enter pairing mode.
- On the Haozee sensor, locate the SET button (often referred to as the pairing button).
- Press and hold the SET button for 3 seconds. The indicator light will quickly flash, indicating the device has entered network configuration mode.
- Once your Zigbee gateway detects the sensor, follow the prompts in your smart home application (e.g., Home Assistant) to complete the binding process.
Note: This sensor supports Home Assistant via Zigbee2MQTT. It will NOT work with Tuya Zigbee Hub or Tuya App directly, and does NOT support ZHA.
6. Parentah Operasi
6.1. Modeu Deteksi
The sensor utilizes a dual-sensor integration of mmWave radar and PIR for accurate human presence and motion detection.
- Deteksi Gerak (PIR): Detects movement within a range of up to 5 meters and a 120-degree angle.
- Stationary Detection (mmWave Radar): Detects subtle movements or stationary presence within a range of up to 3.5 meters and a 120-degree angle. This is particularly useful for elderly care or monitoring if someone is present but not actively moving (e.g., sleeping).
6.2. Environmental Sensing (4-in-1 Version Only)
- Panginderaan Cahaya Ambient: The sensor detects ambient light levels (0-3500x). This data can be used to create smart automations, such as turning lights on/off automatically based on room brightness or when movement is detected.
- Temperature & Humidity Sensing: Monitors indoor temperature and humidity, providing real-time data to your smart home system. This allows for automation of HVAC systems, humidifiers, or fans to maintain optimal comfort.
6.3. Kontrol sareng Kustomisasi Aplikasi
Through your smart home application (e.g., Home Assistant), you can customize various settings:
- Detection Range and Sensitivity: Adjust the mmWave radar detection distance and sensitivity for both motion and stationary detection to suit your specific environment and needs.
- Panggeuing: Receive instant notifications on your app when motion or presence is detected.
- Otomatisasi: Create custom scenes and automations by linking the sensor with other smart devices like lights, curtains, sirens, or cameras.
6.4. Indikator LED
- A red light flashes once when human presence is detected (this feature can be disabled in the app).
- For PIR-only versions, a single click of the SET button can toggle the LED indicator: one long flash means ON, three flashes mean OFF.
6.5. Data Reporting Logic
- Light values are collected every 1 minute and uploaded automatically if there is a change.
- As a low-power device, parameters are updated only when the device is triggered or uploads data.
- When the status is 'no one', the sensor first uses PIR to detect 'presence'. Only after PIR detects someone will the mmWave radar activate for static detection.
- Temperature and humidity data are collected every 15 seconds and reported only if the temperature changes by 0.3°C or humidity by 3%.
7. Pangropéa
7.1. Ngagantian batré
When the batteries are low, the device may not function optimally. Replace the 2 AAA batteries by following the steps in Section 5.2.1. Ensure to use new, non-rechargeable AAA batteries and observe correct polarity.
7.2. beberesih
Wipe the sensor's exterior with a soft, dry cloth. Do not use liquid cleaners or aerosols, as they may damage the device.
8. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Device not pairing | Gateway not in pairing mode; device not in pairing mode; incorrect Zigbee hub. | Ensure Zigbee gateway is in pairing mode. Long press SET button for 3 seconds on sensor. Confirm you are using a compatible Zigbee 3.0 Hub (not Tuya or ZHA). |
| Alarm palsu sering | Sensor placed in high airflow area or near moving objects. | Relocate the sensor to an area free from drafts or constant movement. |
| Missed detections (false negatives) | Sensitivity settings too low; sensor not aligned correctly. | In the app, set "Presence Keep Time" to 60 seconds or more. Set "Static detection sensitivity" to 8x or higher. Ensure the sensor's sensing surface is directly facing the monitored area. |
| Temperature/Humidity data not updating | Changes are too small to trigger an update. | Data is reported only if temperature changes by 0.3°C or humidity by 3%. This is normal behavior for power saving. |
| Umur batre pondok | Frequent detections; using rechargeable batteries. | Reduce detection sensitivity if possible. Ensure you are using non-rechargeable AAA batteries. Consider using Type-C power for continuous operation. |
9. Tips pamaké
- For optimal performance, ensure your Zigbee gateway is centrally located within your home.
- Experiment with the detection range and sensitivity settings in your smart home app to find the best configuration for each room.
- Leverage the ambient light sensor to create energy-saving automations, such as turning off lights when a room is unoccupied and sufficiently bright.
- Utilize the temperature and humidity data to automate climate control devices, enhancing comfort and potentially reducing energy consumption.
- Remember that the sensor cannot distinguish between humans and objects, so position it carefully to avoid unwanted triggers from pets or moving household items.
10. Garansi jeung Rojongan
For warranty information, technical support, or further assistance, please contact the haozee Official Store or refer to the product listing on the platform where it was purchased. Keep your purchase receipt as proof of purchase.
PDF User Manual: View Manual Pamaké (PDF)
