Bubuka
Thank you for choosing the Jebao ELW Series Variable Frequency Wave Pump. This manual provides essential information for the safe and efficient operation of your new aquarium wave pump. The ELW series is designed to create natural wave patterns and water circulation in both fresh and saltwater aquariums, promoting a healthy environment for your aquatic life with its compact design and ultra-silent motor.
Parentah Kasalametan
Mangga baca tur turutan sagala parentah kaamanan taliti pikeun nyegah tatu atawa ruksakna produk.
- Salawasna pegatkeun sambungan kakuatan saméméh ngajalankeun sagala pangropéa atawa instalasi.
- Entong jalankeun pompa upami kabel listrik atanapi colokan rusak.
- Ensure the pump is fully submerged in water during operation to prevent overheating.
- This pump is designed for indoor aquarium use only.
- Jaga controller tetep garing sareng jauh tina cipratan cai.
- Do not attempt to disassemble or repair the pump or controller yourself. Contact qualified personnel for service.
- Ensure the magnetic mount is securely attached to the aquarium glass, not exceeding the specified magnetic thickness.
Eusi pakét
Pastikeun yén sadaya item aya dina pakét anjeun:
- Jebao ELW Wave Pump Unit
- External Controller with Bluetooth
- Power Adapter (Input: 110-240V AC, Output: 12V DC)
- Gunung magnét
- Manual pangguna (dokumén ieu)
spésifikasi
The Jebao ELW series offers various models. Below are the specifications for the ELW-3 model. Other models (ELW-5, ELW-10, ELW-20, ELW-30) will have different flow rates and power consumption.
| Fitur | Specification (ELW-3 Model) |
|---|---|
| Dianjurkeun Ukuran tank | ≤40cm |
| Product Size (W×H) | 39.5 mm × 44 mm |
| Magnetic Thickness | ≤8mm |
| Masukan Voltage (Power Adapter) | AC 110-240V |
| Kaluaran Voltage (to Pump) | DC 12V |
| Kakuatan | 4.5W |
| Laju Ngalir | 2500 L/H |
| Bahan | Rubber (Impeller components) |
| Kasaluyuan | Freshwater and Seawater Aquariums |
Parentah Setup
- Ngabongkar: Sacara saksama miceun sadaya komponén tina bungkusan.
-
Pasang Pompa:
- Place the pump unit inside your aquarium, ensuring it is fully submerged.
- Position the external magnetic mount on the outside of the aquarium glass, directly opposite the pump unit. The strong magnets will hold the pump in place.
- Ensure the glass thickness does not exceed 8mm for secure mounting.
Figure 3: Wave pump mounted inside an aquarium - Nyambung ka Controller: Plug the pump's cable into the designated port on the ELW controller.
- Sambungkeun Kakuatan: Plug the power adapter into the controller, then plug the power adapter into a suitable electrical outlet. Do not power on the pump until it is fully submerged.
- Penempatan awal: Adjust the pump's direction to achieve the desired water flow and wave pattern. Ensure there are no obstructions to the impeller.
Parentah Operasi
The ELW controller allows for various modes and adjustments to customize your aquarium's water movement.
Tombol Controller:
- Tombol Daya (⏻): Ngahurungkeun/mareuman pompa.
- Tombol MODE: Cycles through different wave patterns/modes (e.g., constant flow, wave mode, random flow).
- Tombol FREQ: Adjusts the frequency or intensity of the wave patterns.
- Tombol FEED: Activates a feeding mode, temporarily pausing the pump for a set duration to allow fish to eat without food being swept away.
- Tombol M1-M5: Preset memory buttons to save and recall your favorite settings.
- M/S Button: Likely for switching between manual and synchronized modes (if multiple pumps are used).
- Panah luhur/handap: Adjust parameters like flow rate or frequency within a selected mode.
- Bluetooth: The controller supports Bluetooth connectivity for advanced control via a mobile application (refer to the app's instructions for pairing and usage).
Operasi umum:
- Daya Hurung: Press the Power button to start the pump. The display will show the current mode and settings.
- Pilih Mode: Press the MODE button repeatedly until you find a wave pattern suitable for your aquarium.
- Adjust Frequency/Intensity: Use the FREQ button and/or the Up/Down arrows to fine-tune the wave intensity or flow rate.
- Simpen Setélan: Once you have a desired setting, you can save it to one of the M1-M5 memory buttons by pressing and holding the desired memory button until the controller confirms the save.
- Mode dahar: Press the FEED button to temporarily stop the pump. The pump will resume operation automatically after a set time (usually 10 minutes, check specific model behavior).
Pangropéa
Regular maintenance ensures optimal performance and longevity of your Jebao ELW wave pump.
- Pegatkeun Daya: Always unplug the power adapter from the wall outlet before performing any maintenance.
- Cabut pompa: Carefully remove the pump unit from the aquarium.
- Disassemble (if necessary): Gently twist or unclip the pump casing to access the impeller chamber. The compact wide impeller design facilitates easy access.
- Impeller bersih: Remove the impeller and clean it thoroughly with a soft brush under running water. Remove any algae, debris, or calcium buildup. A mild vinegar solution can be used for stubborn calcium deposits, followed by a thorough rinse.
- Bersih Casing: Bersihkeun pompa casing and any intake/output grilles to ensure unrestricted water flow.
- Pasang deui: Carefully reassemble the pump, ensuring all parts are correctly aligned and securely fastened.
- Pasang deui: Place the pump back into the aquarium and reconnect the power. Ensure it is fully submerged before powering on.
Frékuénsi: It is recommended to clean the pump every 2-4 weeks, depending on the bioload of your aquarium and the rate of debris accumulation.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Pompa teu hurung |
|
|
| Aliran cai lemah atanapi teu aya aliran cai |
|
|
| Noise/geter kaleuleuwihan |
|
|
| Layar kontroler teu jalan |
|
|
Tip pamaké
- Placement for Optimal Flow: Experiment with different pump placements and angles to achieve the best water circulation and wave patterns for your specific tank layout and inhabitants. Aim to eliminate 'dead spots' where water movement is minimal.
- Bubuka bertahap: When introducing new fish or corals, start with a lower flow setting and gradually increase it over a few days to allow them to acclimate to the new water movement.
- Feeding Mode Usage: Utilize the 'FEED' button during feeding times to prevent food from being immediately swept into overflows or filters, ensuring your aquatic life gets sufficient nutrition.
- Regular Impeller Checks: Even if the pump seems to be running fine, a quick visual check of the impeller during routine tank maintenance can catch minor debris accumulation before it becomes a major issue.
- Kontrol Bluetooth: If your model supports Bluetooth, download the official Jebao app for more precise control over modes, schedules, and custom wave patterns.
Garansi sareng Rojongan
Kanggo inpormasi garansi, dukungan téknis, atanapi patarosan jasa, mangga ngahubungi pangecér atanapi produsén langsung. Simpen resi pameseran anjeun salaku bukti pameseran.
Pabrikan: Jebao
Asal: Daratan Cina
