Dumfume 12.8V 100Ah LiFePO4 Lithium Battery User Manual

1. Bubuka

This manual provides essential information for the safe and efficient use of your Dumfume 12.8V 100Ah LiFePO4 Lithium Battery. Designed for deep cycle applications, this battery features a built-in 100A Battery Management System (BMS) and offers a high power output of 1280W with over 6000 cycles. It is ideal for solar energy storage, off-grid systems, home backup power, RVs, marine applications, and other demanding power needs.

Figure 1: Dumfume 12.8V 100Ah LiFePO4 Battery with 1280Wh capacity, 100A BMS, and 6000+ cycles.

2. Émbaran Kasalametan

Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in serious injury or damage to the battery.

• Do NOT use this battery as a starting battery for vehicles.
• Do NOT use this battery for golf carts.
• Do NOT immerse the battery in water or any other liquid.
• When connecting batteries in series or parallel, ensure all batteries are identical (same brand, type, voltage, capacity, and BMS) and purchased within 1 month to ensure optimal performance and safety.
• Hindarkeun sirkuit pondok tina terminal batré.
• Do not disassemble, crush, puncture, or modify the battery.
• Jauhkeun batréna tina seuneu, sumber panas, sareng sinar panonpoé langsung.
• Anggo ngan ukur carjer anu cocog anu dirancang pikeun batré LiFePO4.
• Pastikeun ventilasi anu cekap nalika ngecas sareng ngaleupaskeun.
• Anggo alat pelindung diri (APD) anu pantes sapertos sarung tangan sareng pelindung panon nalika ngokolakeun batré.

Figure 2: Important usage restrictions and guidelines for series-parallel connections.

3. Produk Langkungview

3.1 Fitur

• LiFePO4 Technology: Provides superior performance, longer cycle life, and enhanced safety compared to traditional lead-acid batteries.
• Built-in 100A BMS: Protects against over-voltage, short circuit, over-discharge, over-current, low/high temperature, and over-charge.
• High Cycle Life: Offers 6000+ cycles at 100% Depth of Discharge (DOD).
• Kaluaran Daya Tinggi: Capable of delivering 1280W.
• Wide Temperature Adaptability: Excellent discharge performance even at extreme temperatures, ranging from -4°F to 158°F (-20°C to 70°C). Features low-temperature charging cut-off for safety.
• Laju Self-Discharge Rendah: Retains charge for longer periods when not in use.
• Ringan sareng Kompak: Significantly lighter and smaller than comparable lead-acid batteries.

Figure 3: Key features of the Dumfume LiFePO4 battery, including cycle life, BMS, and capacity.

3.2 Komponén

• Dumfume 12.8V 100Ah LiFePO4 Battery Unit
• M8 Terminal Bolts (for connection)

3.3 Spésifikasi

Figure 4: Physical dimensions and weight of the Dumfume 12.8V 100Ah LiFePO4 battery.

4. Setup jeung Instalasi

4.1 Ngabongkar bungkusan

Carefully remove the battery from its packaging. Inspect for any visible damage. If damage is found, contact customer support immediately.

4.2 Pamasangan

• Mount the battery in a clean, dry, and well-ventilated area.
• Ensure the battery is securely fastened to prevent movement or vibration.
• Hindarkeun dipasang dina sinar panonpoé langsung atanapi caket sumber panas.

4.3 Sambungan Wiring

• Identify the positive (+) and negative (-) terminals. The battery uses M8 terminals.
• Use appropriate gauge cables for your application to minimize voltage drop and ensure safe current flow.
• Connect the positive terminal of the battery to the positive input of your load/charger, and the negative terminal to the negative input.
• Pastikeun sadaya sambungan pageuh sareng aman pikeun nyegah lengkungan sareng panas teuing.
• Series/Parallel Connections: If connecting multiple batteries, refer to the safety section (2) regarding identical batteries. Always connect positive to positive and negative to negative for parallel connections. For series connections, connect the positive of one battery to the negative of the next. Consult a qualified electrician if unsure.

5. Operasi

5.1 Ngecas

• Use a LiFePO4 compatible charger with a voltage range appropriate for 12.8V nominal batteries.
• The built-in BMS will manage the charging process, including over-charge protection and low-temperature charging cut-off.
• Avoid charging the battery below 0°C (32°F) to prevent damage. The BMS will typically prevent charging in such conditions.

5.2 Ngaleupaskeun

• The battery can be discharged within a wide temperature range of -4°F to 158°F (-20°C to 70°C).
• The BMS will protect against over-discharge, cutting off power if the voltage turun teuing low.
• Ensure your load does not exceed the maximum continuous discharge current of 100A.

Figure 5: The battery's excellent discharge performance across a wide temperature range.

6. Pangropéa

• Inspeksi rutin: Periodically check battery terminals for corrosion or loose connections. Clean as necessary.
• Panyimpenan: If storing the battery for an extended period, ensure it is charged to approximately 50% state of charge.
• Long-Term Disuse: To prevent damage from disuse, charge and discharge the battery once every 6 months.
• beberesih: Keep the battery clean and dry. Use a damp cloth to wipe the exterior; do not use harsh chemicals.
• Hindarkeun immersion: Pernah neuleumkeun batré dina cai.

7. Cara ngungkulan

The built-in 100A BMS provides multiple layers of protection. If the battery stops functioning, it may be due to one of the following protective measures:

• Langkung-Voltage panyalindungan: Lamun vol ngecastage exceeds safe limits, the BMS will cut off charging.
• Dina-Voltage (Over-Discharge) Protection: Lamun batré voltage drops too low during discharge, the BMS will cut off output to prevent damage.
• Perlindungan Arus Langkung: If the discharge current exceeds 100A, the BMS will temporarily cut off output.
• Perlindungan sirkuit pondok: In case of a short circuit, the BMS will immediately cut off power.
• High/Low Temperature Protection: The BMS will prevent charging or discharging if the battery temperature falls outside the safe operating range.

In most cases, the BMS will automatically reset once the fault condition is removed. If the issue persists, ensure all connections are secure and the charging source is appropriate. If the problem continues, contact customer support.

Figure 6: The intelligent 100A BMS provides comprehensive protection for the battery.

Catetan: Under various temperature and humidity measurement methods and instruments, voltage and current readings may deviate by 1%~5%. This is normal and does not indicate a fault unless performance is significantly impacted.

8. Tips pamaké

• For optimal performance and longevity, avoid consistently discharging the battery to 0% state of charge.
• When designing your power system, ensure that your inverter, charger, and other components are compatible with LiFePO4 battery characteristics and the 100A BMS limits.
• Consider adding a battery monitor to track the state of charge, voltage, and current for better management of your power system.
• Always use appropriate fuses or circuit breakers in your system to protect the battery and connected equipment.

9. Garansi jeung Rojongan

For warranty information, technical support, or any questions regarding your Dumfume LiFePO4 battery, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.