1. Bubuka produk
The KTC H27T27 is a high-performance, intelligent multiple-frequency scanning display featuring an active matrix thin-film transistor LED-backlit LCD. Controlled by microcomputer MCU digital technology, it offers a compact and lightweight design suitable for various working spaces. This monitor is designed to deliver stunning clarity and smooth performance for both office tasks and gaming.
2. Pancegahan Kaamanan Penting
Please read all instructions carefully before using the product to ensure safe and proper operation.
- Always unplug the power cord before cleaning the display. Use a soft, wet cloth for cleaning; avoid liquid or spray cleaners. For stubborn stains, use an LCD screen cleaner.
- Do not use accessories not recommended by the manufacturer, as they may pose hazards.
- When unplugging the power cord or adapter, always hold the power plug, not the cord itself.
- Keep the display away from water sources (bathtubs, sinks, washing machines, wet ground, swimming pools).
- Do not press the LCD screen surface with fingers or hard objects.
- Ensure proper ventilation: The grooves and holes on the display's casing are for ventilation and heat dissipation. Do not block these openings by placing the display on soft surfaces (bed, sofa, carpet) or near radiators/heaters. Avoid placing it in embedded devices without adequate ventilation.
- Use only the power supply type indicated on the nameplate. Consult your dealer or local power administration if unsure.
- If the power cord or adapter has a three-prong plug, ensure it is used with a properly grounded socket. If your socket doesn't match, contact an electrician for replacement.
- Do not attempt to repair the display yourself, as it involves high voltage. Refer servicing to qualified maintenance personnel.
- Unplug the power cord and contact qualified personnel if the power cord/plug is damaged, the display has been dropped or damaged, or any other obvious abnormality occurs.
- Place the display in a well-ventilated environment, away from strong light, high temperatures, or humidity.
- Storage temperature should be between -20°C and 55°C to prevent permanent damage.
- The monitor screen is fragile; handle with care during movement.
3. Naon dina Box
Before installation, please check if the following accessories are included in the packing box:
- Monitor × 1
- Stand × 1
- Adaptor Daya × 1
- Kabel Daya × 1
- Kabel HDMI × 1
- Pitunjuk Mimitian Gancang × 1
- User Guide (including Warranty Card) × 1
- Obeng × 1
Note: Specific accessories may vary. Please keep packing materials for future transport.
4. Setup Guide
4.1. Pamasangan Dasar
To install the monitor on its base:
- Carefully remove the monitor and base components from the packaging.
- Gantelkeun stand kana monitor.
- Ngamankeun dasar ka stand.
Note: The screws for assembly will be randomly delivered. Please refer to the actual product. We appreciate your understanding.
4.2. Instalasi témbok Gunung
The KTC H27T27 monitor supports VESA wall mounting (100 x 100mm) for flexible placement and ergonomic viewing. To wall mount the monitor:
- Remove the pre-installed base if it is attached.
- Attach a VESA-compatible wall mount bracket (not included) to the back of the monitor using M4*8mm wall mounting screws.
- Mount the bracket to a sturdy wall according to the wall mount manufacturer's instructions.
4.3. Pedoman Instalasi Umum
- The display should be installed near an AC power socket that is easily accessible.
- Disarankeun ngagunakeun basa anu cocog pikeun tujuan kaamanan.
- To prevent injury, the display should be placed on a smooth, horizontal plane.
- Ulah nempatkeun tampilan dimana eta bisa jadi subjected ka Geter mékanis.
- Avoid placing the display where insects may enter.
- Do not place the display directly facing an air conditioner, as internal panel condensation may lead to faults.
- Do not place the display where there is a strong electromagnetic field, as it may be interfered with and damaged by electromagnetic waves.
4.4. Sarat ventilasi
Ensure adequate ventilation around the display to prevent overheating. Leave at least the following clearances:
- 30 cm ti luhur
- 10cm from the sides
- 10 cm ti tukang
Do not cover the ventilation holes or insert anything into the shell. Do not place the display within a limited space, such as a book cabinet or a built-in closet, unless proper ventilation conditions are provided.
5. Parentah Operasi
5.1. Keys and Interfaces
The monitor features a joystick for navigation and various input interfaces on the rear panel.
Joystick Controls:
- Pencét pondok: Hurungkeun tampilan.
- Pencét jeung tahan 3 detik: Pareuman tampilan.
- Move Up (↑): Signal Source Input.
- Move Down (↓): Caang.
- Move Left (←): Shortcut Key for Gaming Assistance.
- Move Right (→): Shortcut Key for Preset.
- Pencét (Asupkeun): Open Sub-menu and Select an Option.
- Press (Back): Exit and Return to Previous Menu.
5.2. Indikator kakuatan
The power indicator light provides information about the monitor's status:
- Constant indicator: The display is in normal operation.
- Flashing indicator: The display is in a no signal state.
Under energy conservation state, the display will resume normal operation if a signal is provided again. The display remains powered on in standby. For safety, always unplug the power cord when the display is not in use for extended periods.
6. Spésifikasi Téknis
| Kategori | Spésifikasi |
|---|---|
| Umum | Merk: KTC Type: Office Monitor Model: H27T27 |
| tampilan | Ukuran Panel: 27 Inci Panel Type: CSOT IPS Melengkung atanapi Datar: Datar Rasio Aspék: 16:9 Maximum Resolution: 2560 x 1440 (QHD) Jinis lampu tukang: ELED Warna Gamut: 99% sRGB Brightness: 300 cd/m² (Typ.) Rasio Kontras: 1300: 1 (Tip) Viewing Angle: ±89 (H) ±89 (V) (Typ.) Pitch piksel: 0.2331 (H) x 0.2331 (V) mm Color Support: 8bits Waktu Tanggapan: 1ms GTG Refresh Rate: 100Hz (Overclock to 120Hz) |
| Antarbeungeut | 2 x HDMI 2.0 (2560x1440@100Hz) 1 x DP 1.4 (2560x1440@100Hz) 1 x Earphone Jack |
| Fitur | Tembok Gunung: Sumuhun Low Blue Light: Rojongan Flicker-Free: Sumuhun HDR: Yes (HDR10) MPRT: Yes FreeSync (Adaptive-Sync): Leres |
| Mékanis | Tilt: -5° to 15° (±3°) VESA Gunung: 100 x 100mm |
| Kakuatan | Input kakuatan: DC12V / 3A Syarat Daya pikeun Adaptor: AC100V~240V, 50/60 Hz Konsumsi gawé: ≤36W Konsumsi sayaga: ≤0.5W |
| Beurat & Ukuran | Net Weight: 4.25kg (with stand) Beurat kotor: 6.25kg Product Size (without stand): 616 × 46.4 × 364.3mm Product Size (with stand): 616 × 191 × 450.3mm Package Size: 690 × 130 × 465mm |
| Lingkungan Gawé | Suhu operasi: 0 ℃ ~ 40 ℃ Operating Humidity: 30%~90% (Non-condensing) Suhu Panyimpenan: -20 ℃ ~ 55 ℃ Storage Humidity: 20%~93% (Non-condensing) Luhurna maksimum: 5000m |
Remark: All technical specifications in this User Guide are subject to change without prior notice. If there is a subtle difference between the User Guide and the actual product operation, the latter shall prevail.
7. Masalah basajan pembuangan
| Gejala | Métode pembuangan |
|---|---|
| 1. Blank screen / Power indicator does not work | Pariksa naha catu daya aya dina kontak anu saé sareng tampilan sareng stop kontak listrik; sareng pariksa naha tampilanna dipareuman. |
| 2. Layar poék | Enter the "Display" menu to regulate the contrast and the brightness of the display. |
| 3. tampilan overheating | Ninggalkeun sahenteuna 10cm rohangan ventilated di sabudeureun layar. Ulah nempatkeun artikel dina tampilan. |
| 4. Poék / titik lampu lamun Powered on | This is normal. Due to temperature differences, the backlit tube may emit uneven light initially. It will normalize after about 20 minutes, and spots will be eliminated. |
| 5. Gambar distorsi, kedip-kedip, oyag | Pariksa konfigurasi komputer anjeun, pilih resolusi nu bener, tur reset laju Anyarkeun Anjeun. |
| 6. Sinyal bising nalika dipareuman | During power-off, some noisy signals on the screen caused by normal discharge are expected. |
Protection Kasalametan
When the PC video signal exceeds the frequency range of the display, the display will disable the line and field synchronizing signals to protect itself. In this situation, you must set the output frequency of the PC to an acceptable range for the display to work properly.
8. Tips pamaké
- Konektipitas: This monitor features HDMI 2.0 and DisplayPort 1.4 inputs. It does NOT have a VGA port. Ensure your devices are compatible with these digital inputs.
- Laju Refresh: While the monitor supports 100Hz natively, it can be overclocked to 120Hz for an even smoother experience. Check your graphics card settings to enable this.
- Kanyamanan panon: Utilize the built-in Low Blue Light and Flicker-Free features to reduce eye strain during extended use. These settings can usually be adjusted via the monitor's OSD menu.
9. Garansi jeung Rojongan
9.1. Warranty Rules
KTC provides a three-year free warranty from the date of purchase or as agreed in the contract. The warranty does not cover:
- Failures or damages caused by artificial or natural disasters.
- Failures caused by not following the operation methods and precautions in the User Guide.
- Failures caused by user disassembly.
The liability scope of the warranty card is limited to the maintenance of the product and does not cover any other liability. For warranty policies after the warranty period, please visit EN.KTCPLAY.COM.
9.2. Further Information and Support
For any questions or comments, please contact KTC support:
- Rojongan Umum: support@ktcplay.com
- Dukungan Éropa: support.eu@ktcplay.com
You can also find more information by scanning the QR code on the product packaging or visiting EN.KTCPLAY.COM.
A detailed user manual is also available in PDF format: KTC H27T27 User Manual (PDF).
9.3. Tanggung jawab Lingkungan
To care for and protect the earth, please send this product to a local manufacturer with nationally recognized qualification for recycling according to applicable laws and regulations on recycling of waste electrical and electronic products when it reaches the end of its service life.
