1. Bubuka
The Aideepen XY8050S is a high-performance CNC adjustable DC step-down power supply module designed for precision voltage and current regulation. Featuring a full-view 1.8-inch high-brightness true color LCD screen, it offers intuitive control and monitoring. This module supports advanced functionalities such as firmware upgrades, MPPT solar charging, and serial communication, making it versatile for various applications. Its robust design includes input anti-reverse protection and output anti-backflow prevention for enhanced safety and reliability.
Figure 1: XY8050S CNC DC Adjustable Step-Down Power Supply
2. Émbaran Kasalametan
- PERHATOSAN: The input terminals of this product are designed for DC power only. Do NOT connect to AC power sources, including 220V mains power. Doing so will cause severe damage to the device and poses a risk of electric shock.
- Ensure all connections are secure and correct polarity is observed before applying power.
- This is a step-down (buck) power supply. The output voltage will always be lower than the input voltage. Specifically, the maximum output voltage is approximately 94.5% of the input voltage.
- Operate the device within its specified voltage, current, and power limits to prevent damage.
- Jauhkeun alat ieu tina kalembaban, lebu, sareng suhu anu ekstrim.
3. Produk Langkungview
The XY8050S module consists of a main power board and a separate display control panel. The main board integrates power conversion components, cooling fans, and communication interfaces. The display panel provides real-time monitoring and control through its intuitive LCD screen and rotary encoder.
Figure 2: Detailed Component View of XY8050S
Komponén konci:
- Input Common-Mode Inductors: Significantly reduce input power ripple for low ripple output.
- High-Temperature-Resistant Magnetic Ring Inductors: Ensure stable operation under various conditions.
- Output 2-Stage Filtering: Provides clean and stable output power.
- 60A Relay: For robust power switching.
- Pindah Daya (ON/OFF): Hard switch for main power control.
- Serial Communication Interface: Includes GND, RX, TX, 5V pins for external communication.
- Analog Control Support: Supports 0-10V analog control, configurable via software.
- External Temperature Sensor Interface: 10k NTC 3950B for precise temperature monitoring.
- MPPT Hardware Switch: With an indicator light illuminating upon MPPT activation.
4. Spésifikasi
| Parameter | Nilai |
|---|---|
| Ngaran produk | CNC DC Step-Down Power Supply |
| Masukan Voltage | 12.00V ~ 90.0V DC |
| Kaluaran Voltage | 0V ~ 80.00V DC |
| Kaluaran Ayeuna | 0A ~ 50.00A |
| Daya Kaluaran | 4000W (Maks) |
| Voltage Resolusi | 0.01V |
| Resolusi ayeuna | 0.01A |
| Storage Data Groups | 10 golongan |
| Éféktivitas Konversi | ~95% (Typical) |
| MPPT Solar Charging | Dirojong |
| Komunikasi | Standard Modbus-protocol serial communication, Independent dual serial ports (TTL and 485) |
| Main Board Dimensions | 170mm x 108mm x 53mm |
| Display Module Dimensions | 86mm x 40mm x 28mm |
| Recommended Opening Size | 81.6 mm x 40.6 mm |
| Beurat produk | 0.76 kg |
Figure 3: Product Dimensions and Recommended Panel Cutout
5. Setélan
5.1 Instalasi fisik
- Pasang Tampilan: If integrating into an enclosure, cut an opening of 81.6mm x 40.6mm for the display panel. Secure the display panel using appropriate fasteners.
- Connecting the Display to Main Board: Use the provided wire to connect the display control panel to the main power board. Ensure the connector is properly seated and secured.
- Sambungan Input Daya: Connect your DC input power source (12.00V to 90.0V) to the 'IN+' and 'IN-' terminals on the main board. Observe correct polarity.
- Power Output Connections: Connect your load to the 'OUT+' and 'OUT-' terminals on the main board.
5.2 Mimiti Power-Up
After all connections are made, switch on the main power using the hard switch (ON/OFF) on the main board. The display panel should light up, showing the current operating parameters.
6. Parentah Operasi
6.1 Kadali Dasar
- Tombol ON/OFF: Located on the display panel, this button toggles the output power.
- V-SET Button: Used to enter voltage setting mode.
- I-SET Button: Used to enter current setting mode.
- Tombol SW: Short press to shift between different display modes or parameters. Long press on the main UI to enable four-way rotation of the display.
- Encoder Rotary: Used to adjust values (voltage, current, parameters) and navigate menus. Press the encoder to confirm selections.
Video 1: Demonstration of XY8050S Power Supply Operations, including setting voltage/current, resetting data, and remote control.
6.2 Setélan Voltage jeung Ayeuna
- Pencét éta V-SET tombol pikeun ngasupkeun voltage setting mode. The voltage value on the display will blink.
- Rotate the encoder to adjust the desired output voltage.
- Press the encoder to confirm the voltagé setting.
- Repeat steps 1-3 using the Kuring-SET button for current setting.
6.3 Display Navigation and Features
- Rotasi 360°: Pencét panjang SW button on the main display interface to rotate the screen orientation by 90 degrees. Repeat to cycle through all four orientations. This allows for flexible viewdina sudut.
- Data Set Parameters Interface: Use the rotary encoder to navigate through various data set parameters such as U-SET (set voltage), I-SET (set current), S-LUP (low voltage protection), S-OUP (over voltage protection), S-OCP (over current protection), S-OPP (over power protection), and S-OTP (over temperature protection).
- System Parameters Interface: Access system settings like backlight brightness (BL1), temperature units (°C/°F), ON/OFF behavior, CLU/CLA (constant voltage/current lock), ZERO-REST (zero reset), MPPT settings, BTF (backflow protection), BCH (battery charge), CLF (cooling fan control), and POF (power-on default).
- Quick Recall Data Set: The device supports storing and recalling up to 10 groups of settings. Use the interface to select and load saved configurations.
- Right Status Bar Shortcuts: The right side of the display shows various status icons and can be navigated for quick access to certain functions.
Figure 4: Display rotation feature for optimal viewing.
6.4 Operasi kadali jauh
The XY8050S supports external remote control via infrared and 433M wireless remote control modules (sold separately). This allows for convenient adjustment of settings and power control from a distance.
Figure 5: Remote control functionality with optional modules.
6.5 MPPT Pangisian Daya Surya
The module supports MPPT (Maximum Power Point Tracking) for solar charging applications. Ensure the MPPT hardware switch is enabled and configured correctly for optimal solar panel performance.
6.6 Komunikasi serial
The XY8050S supports the standard Modbus-protocol for serial communication. It features independent dual serial ports (TTL and 485) for integration with other systems or for remote monitoring and control via a computer or microcontroller.
7. Pangropéa
7.1 Sistim cooling
The device features an optimized dual-fan thermal architecture with two intelligent temperature-controlled PWM fans. These fans provide stepless speed regulation, utilize double ball bearings for extended lifespan, and operate with low noise. One fan focuses on direct cooling of high-heat components (MOSFETs, inductors), while the other optimizes heat dissipation across the entire heatsink. This system reduces operating temperature by 20-30% under typical conditions, supporting continuous full-power operation.
Figure 6: Dual-fan cooling system for efficient heat dissipation.
Regularly check the fan vents for dust accumulation. Clean with compressed air if necessary to ensure optimal airflow and cooling performance.
7.2 beberesih
Wipe the exterior of the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off and disconnected from all power sources before cleaning.
8. Cara ngungkulan
- No Power on Display:
- Check input power connections and ensure correct polarity.
- Pariksa input voltage is within the specified range (12.00V ~ 90.0V DC).
- Ensure the main power switch on the board is ON.
- Kaluaran Voltage Not Reaching Desired Value:
- Konfirmasi input voltage is sufficiently higher than the desired output voltage, as this is a step-down converter. The maximum output is ~94.5% of input.
- Check for any active over-voltage protection (S-OUP) or over-current protection (S-OCP) settings that might be limiting the output.
- Output Current Limited:
- Verify the I-SET value is set correctly.
- Check for active over-current protection (S-OCP) or over-power protection (S-OPP) settings.
- Ensure the load is not drawing more current than the device can supply.
- Display Orientation Issue:
- If the display is not in the desired orientation, long press the SW button on the main UI to rotate it.
9. Tips pamaké
- Simpen prasetél: Utilize the 10 data storage groups to save frequently used voltage and current settings for quick recall, especially useful for repetitive tasks or testing different components.
- Monitor Suhu: Keep an eye on the temperature readings on the display, especially during high-load operations, to ensure the device remains within safe operating limits. The intelligent cooling system is designed to manage heat, but good ventilation is always recommended.
- Kanyamanan Remote Control: For applications where the power supply is in an inaccessible location or for quick adjustments, consider integrating the optional remote control modules.
- Pembaruan firmware: Pariksa produsén urang website periodically for firmware updates to ensure you have the latest features and performance improvements.
10. Garansi jeung Rojongan
For warranty information, technical support, or service inquiries, please refer to the seller's specific policies or contact the retailer from whom the product was purchased. Keep your proof of purchase for any warranty claims.
