BT40 BT40

BT40 Series Motorcycle Helmet Bluetooth Headset

Manual pamaké

1. Bubuka

The BT40 Series Motorcycle Helmet Bluetooth Headset is designed to provide seamless communication and entertainment while riding. Featuring Bluetooth 5.0 technology, dual phone connectivity, and intelligent noise cancellation, it ensures clear audio and stable connections. Its ultra-thin, ergonomic design ensures comfort within various helmet types, and its waterproof construction allows for use in diverse weather conditions.

2. Émbaran Kasalametan

Important Charging Notice:

Please use a DC 5V-1A power charger to charge the headset. The maximum output power of the charger should not exceed 5W. Do not use fast chargers for this device to prevent damage. (Charging plug not included).

3. Eusi Paket

The package includes the BT40 Series Helmet Bluetooth Headset and necessary accessories for installation. The installation method is simple and designed for ease of use.

Image showing the headset and its components, including speakers, microphone, and control unit.
Figure 3.1: Complete accessories for the BT40 headset.

4. Setup jeung Instalasi

The headset is designed for easy installation into various helmet types. Follow these steps:

  1. Attach Velcro: Attach the provided Velcro pads to the designated locations inside the helmet, typically near the ear areas.
  2. Place Earbuds and Adjust Microphone: Position the earbuds inside the helmet, ensuring they are comfortable and do not press on your ears. Adjust the flexible microphone boom so it is close to your mouth for optimal voice pickup.
  3. Route Connecting Wire: Carefully route the connecting wire of the earbud inside the top of the inner lining of your helmet to keep it secure and out of the way.
  4. Penyesuaian ahir: After installation, adjust the helmet's lining to ensure a snug and comfortable fit. The headset is now ready to use.
Diagram showing the dimensions of the headset earbuds and how they fit into a helmet.
Figure 4.1: Ergonomic design and installation steps for the earbuds.

The earbuds are small and thin (width 39.8mm, thickness 8.7mm) to ensure they are lightweight and do not cause discomfort or pressure on the ears when worn inside the helmet.

5. Parentah Operasi

5.1. Kadali dasar

The headset features intuitive controls for easy operation:

Diagram of the control buttons on the headset microphone boom.
Figure 5.1: Headset control button layout.
  • Volume '-' / Next Track: Press to decrease volume. Long press to skip to the next track.
  • Power On/Off / Voice Mode: Press and hold to power the device on or off. Double-tap to activate voice mode. Double-click during pairing to switch between Chinese and English voice prompts.
  • Volume '+' / Previous Song: Press to increase volume. Long press to go to the previous song.

5.2. Papasangan Bluetooth

The headset utilizes Bluetooth 5.0 for stable and low-latency connections. Refer to your phone's Bluetooth settings to pair with the BT40 headset. The device name should appear as 'BT40'.

Illustration of a Bluetooth 5.0 chip, emphasizing stable signal and zero latency.
Figure 5.2: Bluetooth 5.0 chip for stable connection.

5.3. Manajemén nelepon

The headset supports automatic answering of incoming calls for enhanced safety while riding. The caller number will be reported, and the call will be automatically answered.

5.4. Dual Phone Connectivity

The BT40 headset can connect to two mobile phones simultaneously. Any incoming call from either phone will be automatically answered first, ensuring you don't miss important calls.

Image showing the headset connected to two mobile phones, illustrating dual connectivity.
Figure 5.3: Smart connectivity with two mobile phones.

6. Pangropéa

The BT40 headset features a waterproof microphone, allowing for use in rainy conditions. To maintain optimal performance:

  • Tetep port ngecas beresih jeung garing.
  • Hindarkeun ngalaan alat ka suhu anu ekstrim.
  • Clean the earbuds and microphone gently with a soft, dry cloth.
  • Ensure the headset is fully dry before charging if it has been exposed to moisture.
Illustration of the waterproof microphone being used in rain.
Figure 6.1: Waterproof microphone for all-weather use.

7. Cara ngungkulan

  • Henteu aya kakuatan: Ensure the device is fully charged. Connect to a DC 5V-1A charger for 2 hours.
  • Teu Bisa Dipasangkeun: Make sure the headset is in pairing mode (usually indicated by a flashing LED). Turn off and on your phone's Bluetooth and try again. Ensure no other devices are connected to the headset.
  • Kualitas Sora goréng: Check the earbud placement within the helmet. Ensure the microphone is positioned correctly. Verify that the helmet lining is not obstructing the earbuds.
  • Noise During Calls: The headset features dual intelligent noise cancellation. If you experience excessive noise, ensure the microphone is not obstructed and is positioned correctly.
Diagram illustrating dual intelligent noise cancellation technology.
Figure 7.1: Dual intelligent noise cancellation in action.

8. Spésifikasi

Fitur Rincian
Merk Produk Runtuyan BT40
Vérsi Bluetooth Upgraded to V5.0
Port ngecas Micro USB (Android Universal Plug)
Mikropon Built-in rainproof and windproof
Binaural Playtime Sakitar 80 jam
Kahirupan Batré (Siaga) 400 jam
Waktu Ngecas Full for 2 hours
Jarak Gawé > 10 méter
Batré Kaasup Sumuhun (Built-in)
Interkom Dukungan No
Fitur husus Waterproof, Voice Control, Noise Reduction
Tipe Helm Lumaku MODULAR, MOTOCROSS, Open face, Full Face, Flip Up Helmet
Modeu Sambungan Kawat, Bluetooth
Jinis barang Helm Headset
Asalna Daratan Cina
Sertifikasi Euweuh
Pakét Panjang 17 cm
Bungkusan Lebar 16 cm
pakét Jangkungna 2 cm
Beurat pakét 0.073 kg
Table of product parameters including brand, Bluetooth version, charging port, microphone, battery life, and working distance.
Gambar 8.1: Parameter produk lengkep.
Comparison chart showing battery life performance of the BT40 headset versus other headphones.
Figure 8.2: Battery life comparison, highlighting power savings.

9. Tips pamaké

  • For optimal sound, ensure the earbuds are positioned directly over your ears and the microphone is close to your mouth.
  • Regularly check the helmet lining for any wear that might affect headset stability or comfort.
  • Always fully charge the headset before long rides to maximize battery life.
  • While the headset is waterproof, avoid submerging it in water.

10. Garansi jeung Rojongan

For any issues or support inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims. Specific warranty terms may vary by region and retailer.

Dokumén Patali - BT40

Praview GS Tooling ShrinkSMART Manual Operasi Mesin
Manual operasi komprehensif pikeun mesin GS Tooling ShrinkSMART, detil pamasangan, pamakean, pangropéa, pancegahan kaamanan, sareng spésifikasi téknis pikeun wadah alat anu pas.
Praview SpacePak BT Series Hydronic Buffer Tank Installation, Operation & Maintenance Manual
This manual provides detailed instructions for the installation, operation, and maintenance of SpacePak BT Series Hydronic Buffer Tanks. It includes specifications, dimensions, electrical connections, piping diagrams, replacement parts, and warranty information for models BT13-H, BT26-H, BT40-H, and BT80-H.
Praview SpacePak BT Series Hydronic Thermal Storage Tanks Installation, Operation & Maintenance Manual
Comprehensive installation, operation, and maintenance manual for SpacePak BT Series Hydronic Thermal Storage Tanks, including specifications, electrical connections, piping diagrams, and warranty information.
Praview Buku Panduan Pangguna Alat Ukur Jarak Laser Bluetooth SNDWAY
Buku pituduh lengkep pikeun SNDWAY Bluetooth Laser Distance Meter, anu ngawengku peraturan kaamanan, fungsi produk, panggunaan batré, operasi, modeu pangukuran (tunggal, kontinyu, lega, volume, téoréma Pythagoras), konéktivitas Bluetooth, spésifikasi téknis, pangropéa, sareng pesen kasalahan.
Praview Showa Alat Precision Chucks & Panyekel ketok: Micron, teuas, Synchro Series
Jelajahi séri Micron Chuck canggih, Hard Chuck, sareng Synchro Tap Holder Showa Tool, nawiskeun presisi anu teu aya tandinganana, clampkakuatan, jeung durability pikeun aplikasi machining-kinerja tinggi. Panggihan spésifikasi lengkep sareng aplikasi examples.
Praview NT BT Tooling System: Milling Chucks & Collet Holders
Discover the NT BT Tooling System catalog, featuring a comprehensive range of high-performance milling chucks, collet holders, shrink fit holders, and accessories. Detailed specifications and model numbers for precision industrial machining applications.