Jebao DCQ LCD Display Controllable DC Return Water Pump User Manual

1. Bubuka

This manual provides detailed instructions for the safe and efficient operation and maintenance of your Jebao DCQ series controllable DC return water pump. Designed for marine aquariums and fish tanks, these pumps offer advanced control features for optimal water circulation. Please read this manual thoroughly before installation and use.

Jebao DCQ pump and controller — Figure 1: Jebao DCQ pump with LCD display controller.

2. Émbaran Kasalametan

Always observe basic safety precautions to reduce the risk of fire, electric shock, and injury to persons.

Baca sagala parentah taliti saméméh pamakéan.
Entong ngoperasikeun alat naon waé upami aya kabel atanapi colokan anu ruksak, atanapi upami teu tiasa dianggo atanapi parantos turun atanapi rusak dina cara naon waé.
To avoid electric shock, do not immerse the power adapter in water or other liquids.
Salawasna pegatkeun sambungan pompa tina catu daya sateuacan ngalaksanakeun pangropéa atanapi beberesih naon waé.
This pump is designed for use with freshwater and saltwater aquariums only.
Ensure all electrical connections are dry and secure.

3. Produk Langkungview

The Jebao DCQ series pump is a high-performance, energy-efficient DC return pump featuring an external electronic driver for precise control. Key features include:

All-new wave mode for dynamic water movement.
External electronic driver for easy speed and mode adjustments.
High-performance closed impeller design.
Four-pole electronic motor for quiet operation.
Suitable for both freshwater and saltwater aquarium environments.
LCD display controller for intuitive operation, including speed controls, wave mode, and feed mode.

Jebao DCQ pump components — Figure 2: Main components of the Jebao DCQ pump system, including the pump, controller, power adapter, and various fittings.

Jebao DCQ pump controller — angka 3: Tutup-up view of the DCQ pump controller with LCD display and control buttons.

4. Spésifikasi

The Jebao DCQ series pumps are available in various models with different power, lift, and flow rates. Please refer to the tables below for detailed specifications.

4.1 DCQ Series (24V)

Jebao DCQ 24V pump specifications table — Figure 4: Specifications for Jebao DCQ-series 24V pumps.

Table 1: DCQ Series (24V) Specifications
Modél	Voltage	Kakuatan	Angkat	Aliran	Ukuran (MM)
DCQ-3500	24V	28W	3M	3500L	138 x 80 x 112
DCQ-5000	24V	40W	3.5M	5000L	165 x 90 x 125
DCQ-6000	24V	45W	3.5M	6300L	165 x 90 x 125
DCQ-8000	24V	65W	4.5M	8000L	165 x 90 x 125
DCQ-10000	24V	80W	5.5M	10000L	165 x 90 x 125

4.2 ACQ Series (220V)

Jebao ACQ 220V pump specifications table — Figure 5: Specifications for Jebao ACQ-series 220V pumps.

Table 2: ACQ Series (220V) Specifications
Modél	Voltage	Kakuatan	Angkat	Aliran	Ukuran (MM)
ACQ-3500	220V	35W	3.2M	3500L	138 x 80 x 112
ACQ-5000	220V	48W	3.5M	5000L	165 x 90 x 125
ACQ-6000	220V	62W	4.2M	6500L	165 x 90 x 125
ACQ-8000	220V	70W	4.8M	8000L	165 x 90 x 125
ACQ-10000	220V	82W	5.2M	10000L	165 x 90 x 125

Jebao DCQ pump dimensions — Figure 6: Approximate dimensions of the pump (e.g., 10.5cm height, 13.6cm length, 2.5cm output, 3.3cm input).

4.3 General Properties

Bahan: karét
Fixed Form: Sitting (designed for stable placement)
Voltage: 110-240V (input for power adapter, specific pump models are 24V DC or 220V AC)
Sumber Daya: Powered via external adapter
Batré Kaasup: No
Kimia anu prihatin tinggi: Euweuh

5. Setup jeung Instalasi

Follow these steps to properly set up your Jebao DCQ pump:

**Unpacking**: Carefully remove all components from the packaging. Inspect for any damage.
**Placement**: The pump is designed for submersible use in a sump or directly in the aquarium. Ensure it is placed on a stable, flat surface. The pump features suction cups on its base for secure placement (see Figure 7).
**Fittings**: Attach the appropriate output nozzle and intake screen to the pump. Ensure a tight fit to prevent leaks.
**Hose Connection**: Connect your return hose to the pump's output nozzle. Secure with a hose clamp if necessary (not included).
**Electrical Connection**:
- Connect the pump's power cable to the DCQ pump driver (controller).
- Connect the power adapter to the DCQ pump driver.
- Plug the power adapter into a suitable electrical outlet (110-240V, depending on your pump model).
Refer to the wiring diagram below for correct connections.

Figure 7: Wiring diagram showing connections between the pump, controller, and power adapter.
**Initial Start-up**: Once all connections are secure and the pump is submerged, plug in the power adapter. The pump should start automatically or can be turned on via the controller.

6. Parentah Operasi

The DCQ pump driver allows for precise control over pump speed and various modes.

6.1 Fungsi Pangontrol

Jebao DCQ pump controller buttons — Figure 8: DCQ pump controller with LCD display and buttons for speed adjustment and mode selection.

**LCD Display**: Shows current speed setting or mode status.
**'+' Button**: Increases pump speed/flow.
**'-' Button**: Decreases pump speed/flow.
**'W/F' Button**: Toggles between Wave Mode and Feed Mode.

6.2 Adjusting Pump Speed

Use the '+' and '-' buttons on the controller to adjust the pump's output speed. The LCD display will show the current speed level. Adjust to achieve desired flow rate for your aquarium.

6.3 Wave Mode

Press the 'W/F' button to activate Wave Mode. This mode creates varying flow patterns to simulate natural ocean currents, beneficial for coral and fish health. The display will indicate when Wave Mode is active.

6.4 Feed Mode

Press the 'W/F' button again to activate Feed Mode. In this mode, the pump will temporarily shut off or reduce flow for a set period (e.g., 10 minutes) to allow fish to feed without food being immediately swept away. The display will show 'Feed' or a countdown. The pump will resume normal operation automatically after the set time.

7. Pangropéa

Regular maintenance ensures optimal performance and longevity of your Jebao DCQ pump.

**Disconnect Power**: Always unplug the pump from the power outlet before performing any maintenance.
**Disassembly**:
- Remove the intake screen (Figure 9).
- Unscrew the impeller housing (Figure 10).
- Carefully remove the impeller assembly (Figure 11).
- The ceramic shaft and bearings can also be removed for thorough cleaning (Figure 12).
Figure 9: Pump with intake screen attached.

Figure 10: Pump with intake screen removed, showing the impeller housing.

Figure 11: Pump with impeller housing removed, revealing the impeller assembly.

Gambar 12: Detil view of the impeller assembly.

Figure 13: Ceramic shaft and bearings, which should be inspected and cleaned.
**Cleaning**: Use a soft brush and warm water to clean all pump components, especially the impeller and its chamber, to remove any algae, debris, or calcium buildup. For stubborn deposits, a mild vinegar solution can be used, followed by thorough rinsing.
**Reassembly**: Reassemble the pump in reverse order, ensuring all parts are correctly seated and secured.
**Regular Inspection**: Periodically check the power cord and connections for any signs of wear or damage.

8. Cara ngungkulan

Tabel 3: Léngkah-léngkah Ngungkulan Masalah Umum
Masalah	Mungkin Cukang lantaranana	Solusi
Pump not starting/no power	Adaptor daya teu nyambung atawa rusak. Controller not connected properly. Kakuatan anjeuntage.	Pariksa sambungan kakuatan sarta stop kontak. Ensure controller cables are securely plugged into the pump and power adapter. Pariksa catu daya.
Laju aliran ngurangan	Impeller clogged with debris/algae. Calcium buildup in pump or plumbing. Pump speed set too low.	Disconnect power and clean the impeller and pump chamber (see Maintenance section). Increase pump speed using the '+' button on the controller.
Noise/geter mahiwal	Uing dina impeller. Impeller damaged or worn. Pump not seated properly.	Disconnect power and clean the impeller. Inspect impeller for damage; replace if necessary. Ensure pump is securely placed on its suction cups.
Layar kontroler teu jalan	Loose connection to pump or power adapter. Controllor ngarusak.	Pariksa sadaya sambungan kabel. Kontak rojongan customer lamun masalah persists.

9. Tips pamaké

**Regular Cleaning**: Many users find that regular cleaning (e.g., monthly) of the impeller and pump body with a vinegar solution helps prevent calcium buildup and maintains optimal flow.
**Cable Management**: Ensure cables are routed safely and not pinched, especially where they exit the aquarium or sump.
**Controller Placement**: Position the controller in a dry, easily accessible location away from splashes.

10. Garansi jeung Rojongan

This product comes with a 12-month manufacturer's limited warranty for defective items, excluding items damaged or misused after receipt. Accessories typically come with a 3-month warranty. In case of a defect, the item must be reported and returned within the warranty period in its original packaging. The manufacturer will repair or replace items with an expired warranty.

For technical support or warranty claims, please contact your retailer or the manufacturer directly with your purchase details and a description of the issue.

	Buku Panduan Pangguna Pompa Akuarium Seri MDC Jebao Buku pituduh pikeun pompa akuarium seri Jebao MDC, fitur-fitur anu lengkep, pitunjuk kaamanan, pamasangan, operasi, sareng spésifikasi téknis. Ngawengku modél MDC-2000 dugi ka MDC-10000.
	Buku Panduan Pangguna Pompa DC Pinter Jebao - Seri MDP Buku pituduh lengkep pikeun Pompa DC Pinter Jebao (Seri MDP), anu ngawengku fitur, operasi, kontrol aplikasi, setelan Wi-Fi, pangropéa, sareng ngungkulan masalah.
	Buku Panduan Pangguna Pompa DC Jebao - Seri DCP Buku pituduh lengkep pikeun Pompa DC Jebao (DCP-2500 dugi ka DCP-20000), anu ngawengku fitur, operasi, pangropéa, sareng ngungkulan masalah.
	Buku Panduan pikeun Nu Boga Pompa DC Jebao - Modél DCP-2500 nepi ka DCP-20000 Buku Panduan Pamilik Pompa DC Jebao nyayogikeun pitunjuk anu lengkep pikeun operasi, pamasangan, pangropéa, sareng ngungkulan masalah anu aman pikeun modél DCP-2500, DCP-3000, DCP-4000, DCP-5000, DCP-6500, DCP-8000, DCP-10000, DCP-15000, DCP-18000, sareng DCP-20000. Diajar ngeunaan fitur-fitur sapertos laju aliran anu tiasa diatur, modeu asupan, fungsi mémori, sareng panyalindungan pareum otomatis pikeun aplikasi submersible sareng non-submersible dina lingkungan laut sareng cai tawar.
	Buku Panduan Pangguna Jebao Smart Wave Maker - Setelan, Operasi, sareng Pangungkulan Masalah Buku panduan lengkep pikeun Jebao Smart Wave Maker (MCP, MLW, MOW SERIES), anu ngawengku pamasangan, fitur, kontrol aplikasi via Jebao Aqua, rupa-rupa modeu gelombang, ngungkulan masalah, sareng pangropéa. Diajar kumaha nyetél sareng ngoperasikeun Jebao wave maker anjeun pikeun kaayaan akuarium anu optimal.
	Buku Panduan Pamilik Pompa DC Jebao - Seri DCW Buku panduan lengkep pikeun Pompa DC Jebao, anu ngawengku modél DCW-2000 dugi ka DCW-10000. Ngalengkepan fitur, pitunjuk operasi, fungsi kontroler, pangropéa, ngungkulan masalah, sareng pedoman pembuangan.