Fujitsu Panel Controller Instruction Manual

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your Fujitsu Panel Controller. Please read this manual thoroughly before using the unit to ensure proper function and to prevent damage. Keep this manual for future reference.

2. Émbaran Kasalametan

• Ensure the power supply matches the unit's requirements (DC12V).
• Installation and wiring should be performed by a qualified professional to prevent electrical shock or fire.
• Do not attempt to repair or modify the unit yourself. Contact service personnel for any issues.
• Keep the unit away from water and excessive humidity.

3. Setélan

3.1 Pamasangan

The panel controller is designed for wall mounting. Use appropriate screws and anchors for secure installation. Ensure the mounting location allows for easy access and visibility of the display.

3.2 Kabel

Connect the controller to a DC12V power source. Refer to the wiring diagram on the back of the unit for correct connections. Incorrect voltage or wiring can damage the unit.

4. Parentah Operasi

Familiarize yourself with the buttons and display on the front panel of the controller.

4.1 Operasi Dasar

• Mimitian / STOP: Pencét pikeun ngahurungkeun atanapi mareuman unit.
• SET TEMP: Use the up/down arrows next to 'SET TEMP' to adjust the desired temperature.

4.2 Pamilihan Mode

• MODÉ TIMER: Press to cycle through timer settings.
• Dinten: Used for setting the day in timer functions.
• kipas: Nyaluyukeun kecepatan atanapi modeu kipas.
• MODE PROG: For programming advanced settings.
• Pangropéa: Ngaksés fungsi anu aya hubunganana sareng pangropéa.
• ÉKONOMI: Aktipkeun mode hemat energi.

4.3 Fungsi Timer

• PANGATUR JAM: Pikeun nyetel waktos ayeuna.
• SET MULANG: Used in conjunction with timer settings.
• HAPUS WAKTU: Ngahapus setélan timer anu diprogram.
• TIMER SET: Sets new timer programs.

4.4 Special Functions and Indicators

• Mode ayun: To select swing mode, press the button labeled with a fan icon and '3/C' for 2 seconds.
• Saring Reset: When operating the FILTER RESET function, press the 'FILTER RESET' button for 2 seconds.
• Fungsi Tombol Teu Sadia: If '0--' is flashing on the display, the function of the currently selected button is not available.
• Setélan konci: If 'CL' or 'PL' is flashing on the display, the unit's lock function is active.
• Indikasi pikeun Ngaleutikan: If 'D/C' is indicated on the display, the unit is currently stopped for defrosting.
• Setting Delay: Any setting or operation will take effect a few seconds after the applicable button has been pressed.

5. Pangropéa

To ensure optimal performance and longevity of your panel controller, follow these maintenance guidelines:

• beberesih: Wipe the surface of the controller with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly. Do not use abrasive cleaners, solvents, or chemical sprays.
• Ngahindarkeun halangan: Ensure that the controller's sensors (if any) are not obstructed by dust or objects.
• Cék biasa: Pariksa périodik pikeun sambungan leupas atawa tanda maké.

6. Cara ngungkulan

If you encounter any issues with your panel controller, refer to the following common problems and solutions:

• 'EE' Error Message: If the error message 'EE' is displayed, this indicates a system error. Please contact qualified service personnel for diagnosis and repair.
• Button Not Responding / '0--' Flashing: If '0--' is flashing on the display, the function of the button you are trying to use is currently unavailable. Check other settings or modes that might be conflicting.
• Unit Not Responding / 'CL' or 'PL' Flashing: If 'CL' or 'PL' is flashing on the display, the unit's lock function is active. Refer to your main HVAC unit's manual or contact service personnel to disable the lock.
• Unit Stopped / 'D/C' Indicated: If 'D/C' is indicated on the display, the unit is currently undergoing a defrost cycle. This is normal operation; the unit will resume once defrosting is complete.

7. Spésifikasi

8. Tips pamaké

• Always ensure the protective flap is closed when not actively adjusting settings to prevent accidental changes or dust accumulation.
• Take note of the display indicators; they provide crucial information about the unit's current status or any active functions.
• For optimal energy efficiency, utilize the 'ECONOMY' mode and program timers to match your usage patterns.

9. Garansi jeung Rojongan

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your main Fujitsu HVAC system or contact your authorized Fujitsu dealer or service center. Keep your purchase receipt as proof of purchase.