1. Bubuka
This manual provides detailed instructions for the installation, operation, and maintenance of your VEVOR Automatic Garage Door Opener. Designed with a powerful AC motor, this opener is capable of moving garage gates with pulling and pushing forces of 800 N or 1000 N, depending on the model. It features a soft and smooth opening/closing mode and advanced safety mechanisms to ensure reliable performance. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Parentah Kasalametan
PERHATOSAN: Gagal nuturkeun parentah kaamanan ieu bisa ngakibatkeun tatu serius atawa karuksakan harta.
- Keep children away from the garage door opener and its control devices. Do not allow children to play with the remote controls.
- Ensure that the garage door area is clear of people and objects before operating the opener.
- The installation and maintenance of this product must be conducted by qualified professionals.
- Do not attempt to repair or modify the opener yourself. Contact qualified service personnel for assistance.
- Regularly inspect the garage door and opener for signs of wear or damage. Do not operate if damaged.
- In case of power failure, the self-lock design will engage. Refer to the manual for manual operation procedures if needed.
3. Eusi Paket
Pastikeun yén sadaya item anu didaptarkeun di handap kalebet kana pakét anjeun:
- 1 x Unit Pambuka Gerbang Garasi
- 2 x Kadali Jauh
- 1 x Set of Guide Rail (3 meters / 9.8 feet chain drive)
- 1 x Set of Installation Accessories (brackets, bolts, nuts, etc.)
- 1 x Manual Pamaké (dokumén ieu)
4. Spésifikasi
| Atribut | Nilai |
|---|---|
| Tarik jeung Push Force | 1000 N / 800 N (depending on model) |
| Dipeunteun Voltage | AC 220V |
| Motor Voltage | 24V DC |
| Daya Motor | 200W / 120W, 154W max (depending on model) |
| Wewengkon lumaku | 15 m² / 12 m² max (depending on model) |
| Panjang Rel | 9.8 ft / 3 m (ranté) |
| Operasi Noise | <60dB |
| Laju ngajalankeun | 120 mm/s |
| Kodeu kadali jauh | Kodeu rolling |
| Frékuénsi Jauh | 433.92 MHz |
| Batré Jauh Voltage | 12v, 27a |
| Lampu Otomatis | Pareum saatos 3-5 menit |
5. Setup jeung Instalasi
The VEVOR garage door opener is designed for easy installation, requiring no specialized electrician or welding. All necessary hardware is included in the package. Follow these general steps for installation:
- Mount the Opener Unit (A): Amankeun unit pembuka utama kana siling atanapi struktur dukungan anu pas di luhur panto garasi.
- Assemble and Attach the Guide Rail (B): Connect the sections of the 3-meter guide rail and attach it to the opener unit and the garage door header. Ensure the chain is properly tensioned.
- Sambungkeun Panangan Panto (C): Attach the door arm from the opener's trolley to the garage door. This mechanism allows the opener to pull and push the door.
- Install Safety Release (D): Install the manual release mechanism, typically a rope or handle, which allows for manual operation of the door in case of power failure.
- Wiring: Connect the power cord to a suitable AC 220V power outlet.
- Uji sareng adjustment: After installation, perform initial tests to ensure the door opens and closes smoothly without obstruction. Adjust limits and force settings as needed.
This opener is suitable for sectional and up & over doors, and can be applied to garage doors with a surface area up to 15 m² (or 12 m² depending on the model).
6. Parentah Operasi
Your VEVOR garage door opener offers convenient and quiet operation with its dual-channel remote controls and intelligent features.
6.1 Operasi kadali jauh
- The opener comes with two wireless remote controls.
- Press the designated button on the remote to open, close, or stop the garage door.
- The remote control has an effective range of 25-35 meters, extending up to 50 meters in open areas.
6.2 Fungsi Panel Control
The opener unit features a control panel for settings and manual operation:
- Adjusting Button: Used for fine-tuning settings.
- Layar tampilan: Némbongkeun status ayeuna atanapi inpormasi pamrograman.
- Tombol Setel: For entering programming mode and confirming selections.
- Tombol Reureuh: To temporarily stop the door's movement.
6.3 nutup otomatis tur Fitur Kasalametan
- Flexible Starting & Stopping: The opener is designed for smooth and controlled movement.
- Deteksi halangan: The system can automatically detect obstacles during the door's movement and will stop or reverse to prevent damage or injury.
- Desain Konci Mandiri: In the event of a power failure, the opener automatically engages a self-locking mechanism to secure the garage door.
- Auto Lighting: The integrated light turns off automatically after 3-5 minutes of inactivity.
6.4 Operasi Noise Leutik
The opener operates at a noise level of less than 60 dB, ensuring a quiet environment.
7. Pangropéa
Regular maintenance ensures the longevity and safe operation of your garage door opener. All maintenance should be performed by qualified professionals.
- Inspeksi taunan: Have the opener and garage door system inspected annually by a professional.
- Lubrication: Ensure moving parts, such as the chain and rollers, are properly lubricated according to the manufacturer's recommendations for your specific garage door type.
- Pariksa maké: Periodically check the chain, cables, springs, and other hardware for signs of wear, corrosion, or damage. Replace worn parts immediately.
- Sénsor beresih: If your system includes safety sensors, ensure they are clean and unobstructed.
- Batré jauh: Replace the 12V, 27A battery in your remote controls as needed.
8. Cara ngungkulan
This section provides general guidance for common issues. For complex problems, contact a professional technician.
- Door does not move: Check power supply, ensure the opener is plugged in, and circuit breaker is not tripped. Verify remote control battery.
- Panto ngabalikeun sacara teu disangka-sangka: Check for obstructions in the door's path. Ensure safety sensors are aligned and clean. The force settings might need adjustment by a professional.
- Kadali jauh teu jalan: Replace the remote battery (12V, 27A). Re-program the remote if necessary (refer to specific programming instructions not detailed in this general manual).
- Noise kaleuleuwihan salila operasi: Inspect for loose hardware or worn parts. Lubricate moving components. If noise persists, professional inspection is recommended.
- Lampu teu hurung/pareum: Check the light bulb. The auto-lighting feature turns off after 3-5 minutes; ensure this is not mistaken for a malfunction.
9. Garansi jeung Rojongan
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact VEVOR customer service directly. Keep your purchase receipt as proof of purchase.
