A89E Brushless Motor Controller User Manual

1. Bubuka

This manual provides essential information for the safe and effective installation, operation, and maintenance of your A89E Brushless Motor Controller. Designed for a wide range of electric vehicles including ebikes, scooters, and motorcycles, this controller supports 48V, 60V, 64V, and 72V systems with 1000W brushless motors. It features intelligent drive, optimized algorithms for powerful performance, and includes a reverse function, three-speed switching, and intelligent cruise control.

The A89E controller is built with a high-speed processor, incorporating a professional differential motor algorithm, 256-byte built-in RAM, and two 16-bit timer calculators for efficient and responsive control. Its robust construction includes durable, reinforcing screws fixed with waterproof thermal conductive adhesive for enhanced waterproofing and heat dissipation.

2. Spésifikasi

Note: The product's printed words may vary depending on the manufacturing batch, but this does not affect its functionality or specifications.

3. Setup jeung Instalasi

3.1 Pancegahan Kasalametan

• Always disconnect the battery power before performing any installation or wiring.
• Pastikeun sadaya sambungan aman sareng insulated leres pikeun nyegah sirkuit pondok.
• Upami anjeun henteu yakin kana léngkah naon waé, konsultasi ka teknisi anu mumpuni.
• Anggo alat pelindung pribadi (PPE) anu pas nalika dipasang.

3.2 Pemasangan Fisik

Mount the controller in a secure location, away from direct exposure to heavy water spray or extreme heat. The controller's casing is splashproof, and its reinforcing screws are sealed with waterproof thermal conductive adhesive for durability and heat dissipation. Ensure adequate airflow around the unit for optimal performance.

3.3 Parentah Wiring

Refer to the wiring diagram below for connecting the controller to your vehicle's components. Ensure each wire is connected to its corresponding function. Incorrect wiring can damage the controller or other components.

Sambungan Wiring:

• Sasayogian tanaga:
  • Thick Red: Power supply positive
  • Thick Black: Power supply negative
• Sambungan Motor:
  • Motor A (Yellow, Green, Blue): Connect to motor phase wires.
  • Motor B (Yellow, Green, Blue): Connect to motor phase wires.
  • Motor C (Yellow, Green, Blue): Connect to motor phase wires.
• Hall Sensor Wires (for throttle/handle):
  • Fine Red: 5V
  • Fine Black: Ground
  • Fine Green: Hall handle signal
  • Fine Yellow: Hall signal
  • Fine Blue: Hall signal
• Brake Connections:
  • Yellow: High battery brake
  • Brown: Low-level braking
• Function Wires:
  • Blue, Green: Reversing line
  • Blue, Green: Three-speed switch
  • White: Cruise signal
  • Black: Cruise ground wire
  • Red: Electric door lock
  • Purple: Option line
  • Orange: Option line
• Sistim anti maling:
  • Fine Red: Power
  • Fine Black: Ground
  • Fine Green: Dynamic anti-theft signal
  • Fine Yellow: Anti-theft power
  • Fine Blue: Anti-theft signal
  • Red, Black: Anti-theft power supply
• Sambungan Instrumen:
  • Red, Black, Green: Pointer instrument

4. Operasi

The A89E controller offers several intelligent features to enhance your riding experience:

• Fungsi sabalikna: Utilize the designated reversing line to engage reverse gear, useful for maneuvering in tight spaces.
• Three-Speed Switch: The three-speed switch allows you to select between different power output levels, optimizing for speed, range, or torque as needed.
• Intelligent Cruise: Engage the intelligent cruise function for maintaining a constant speed, reducing rider fatigue on longer journeys.
• Alarm anti maling: The integrated anti-theft alarm system provides an additional layer of security for your vehicle.

Consult your vehicle's specific wiring and control setup for details on how to activate and use these functions, as they typically interface with external switches or displays.

5. Pangropéa

The A89E Brushless Motor Controller is designed for durability and low maintenance. Follow these general guidelines to ensure its longevity:

• Tetep Bersih: Periodically clean the exterior of the controller to prevent dust and debris buildup, which can affect heat dissipation. Use a dry or slightly damp lawon.
• Pariksa sambungan: Regularly inspect all wiring connections to ensure they are tight and free from corrosion. Loose connections can lead to intermittent operation or damage.
• Hindarkeun Kaayaan Ekstrim: While splashproof, avoid submerging the controller in water or exposing it to extreme temperatures for prolonged periods.
• Desain disegel: The controller's reinforcing screws are sealed with waterproof thermal conductive adhesive, indicating a robust, low-maintenance internal design. Do not attempt to open the controller unless you are a qualified technician.

6. Cara ngungkulan

If you encounter issues with your A89E Brushless Motor Controller, consider the following basic troubleshooting steps:

• Henteu aya kakuatan:
  • Check the main battery connection and ensure it is fully charged.
  • Verify the electric door lock wire is properly connected and receiving power.
  • Inspect all power supply wires for damage or loose connections.
• Motor teu ngabales:
  • Ensure all motor phase wires (Motor A, B, C) are correctly connected.
  • Check the Hall sensor wires (Fine Red, Black, Green, Yellow, Blue) for proper connection and integrity.
  • Verify the throttle (Hall handle) is functioning correctly.
• Operasi erratic:
  • Inspect all wiring for any signs of damage, fraying, or short circuits.
  • Ensure the controller is securely mounted and not vibrating excessively.
• Features Not Working (e.g., Reverse, Cruise):
  • Check the specific function wires (Reversing line, Three-speed, Cruise signal) for correct connection to their respective switches or controls.

If the problem persists after performing these checks, it is recommended to consult a professional electric vehicle technician.

7. Tips pamaké

Based on general user experiences with similar motor controllers, here are some tips:

• Uji Awal: Before final assembly, perform a basic functional test of the motor and controller to ensure all connections are correct and the system operates as expected.
• Manajemén Kabel: Use cable ties to neatly organize and secure all wires, preventing them from snagging or getting damaged during use.
• Manajemén Panas: While the controller has good heat dissipation, avoid enclosing it in a space with no airflow, especially during high-power operation.

Teu aya pangguna khusus deuiviews or Q&A data were provided for this product to offer more tailored tips.

8. Garansi jeung Rojongan

For warranty information, technical support, or service inquiries regarding your A89E Brushless Motor Controller, please contact the seller directly. The seller for this product is Outdoor Recreation Dropshipping Store.

Keep your purchase records, including order number and date of purchase, as they may be required for warranty claims.