1. Bubuka
The Godox TR TTL Hot Shoe Riser is designed to elevate your camera's flash unit, providing greater flexibility for flash positioning and reducing red-eye or harsh shadows. It features a 0-90° tilt adjustment for both direct and bounce flash photography, ensuring optimal lighting while maintaining lens compatibility and image clarity.
This riser is compatible with various camera systems and flash units, supporting TTL (Through-The-Lens) and HSS (High-Speed Sync) functionalities.
The TR TTL Hot Shoe Riser is compatible with Canon E-TTL II, Nikon i-TTL, Sony, Fuji, OM System, Panasonic, and other systems supporting TTL and HSS. It is ideal for use with Godox flash units weighing under 300g. Note: Compatible with iT30Pro/iT20 /iT22/ iM30/iM20 (Only in M mode when using with iM series). TTL and HSS are not supported when used with single-contact flash units.
2. Produk Langkungview
The Godox TR Hot Shoe Riser is a compact and lightweight accessory that provides an elevated and adjustable mounting point for your external flash unit. Its robust design ensures a secure connection between your camera and flash.
Hareup jeung sisi view of the Godox TR TTL Hot Shoe Riser.
3. Setup jeung Instalasi
Follow these steps to properly install the Godox TR Hot Shoe Riser and your flash unit:
- Mount the Riser to Camera: Slide the base of the TR Hot Shoe Riser into your camera's hot shoe mount. Ensure it is fully seated and then tighten the locking mechanism (if present on your camera's hot shoe or the riser itself) to secure it firmly.
- Mount Flash to Riser: Slide your compatible flash unit (e.g., Godox iT20, iT22, iT30Pro) onto the hot shoe of the TR Riser. Secure the flash unit by tightening its locking mechanism.
- Pariksa sambungan: Verify that both the riser and the flash unit are securely attached and do not wobble.
Example of the Godox TR Hot Shoe Riser with an iT30Pro flash mounted on a camera, demonstrating its elevated position and tilt capability.
Examples of the Godox TR Hot Shoe Riser with iT20 and iT22 flashes mounted on cameras, illustrating the tilt adjustment.
4. Operasi
The primary function of the TR Hot Shoe Riser is its 0-90° tilt adjustment, which allows for versatile flash positioning:
- Direct Flash: For standard, forward-facing flash illumination.
- Bounce Flash: Tilt the flash upwards (e.g., towards a ceiling) to soften shadows and create more natural-looking light. The riser's height helps ensure the flash clears the lens, preventing vignetting or shadows cast by the lens itself.
To adjust the tilt, gently push or pull the flash unit mounted on the riser to the desired angle. The mechanism is designed to hold the flash securely at various positions within the 0-90° range.
The TR riser allows 0-90° tilt for both direct and bounce flash, and its height ensures lens compatibility while preserving image edge clarity.
5. Tips pamaké
- Preventing Lens Shadows: The riser's elevated design helps prevent the flash from casting shadows from longer lenses, especially in portrait orientation.
- Bounce Flash Effectiveness: Utilize the 0-90° tilt to bounce flash off ceilings or walls for softer, more diffused lighting. Experiment with different angles to achieve desired effects.
- Addressing Darker Bottom Half in Longer Shots: For longer shots taken with a flash, a darker bottom half of the photo may occur. Using the Hot Shoe Riser is recommended to mitigate this issue by elevating the flash.
6. Spésifikasi
| Fitur | Rincian |
|---|---|
| Nomer modél | TR-C/N/S/F/O |
| Brand cocog | Godox (Compatible with Canon, Nikon, Sony, Fuji, Olympus, OM System, Panasonic) |
| Model cocog | iT20, iT22, iT30Pro, iM30, iM20 (iM series only in M mode) |
| Adjustment Dengdekkeun | 0-90 ° |
| Beurat | 26.5g / 0.585 lbs |
| Ukuran (W x H x D) | 32.42mm (1.28 in) x 36.3mm (1.43 in) x 40.66mm (1.60 in) |
| Asalna | Daratan Cina |
| Kimia anu prihatin tinggi | Euweuh |
Detailed measurements and weight of the Godox TR Hot Shoe Riser.
7. Pangropéa
To ensure the longevity and optimal performance of your Godox TR Hot Shoe Riser, follow these maintenance guidelines:
- beberesih: Use a soft, dry cloth to wipe the surface of the riser. Avoid using harsh chemicals or abrasive materials, which can damage the finish or electronic contacts.
- Panyimpenan: Store the riser in a cool, dry place away from direct sunlight and extreme temperatures. When not in use, it is advisable to detach it from both the camera and the flash unit to prevent unnecessary stress on the hot shoe mounts.
- Titik Kontak: Keep the hot shoe contact points clean and free of dust or debris to ensure reliable communication between the camera and flash.
8. Cara ngungkulan
If you encounter issues with your Godox TR Hot Shoe Riser, consider the following common solutions:
- Lampu kilat teu hurung:
- Ensure the riser is securely mounted to the camera's hot shoe and the flash is securely mounted to the riser.
- Check that the flash unit is powered on and its settings are appropriate for your camera.
- Verify that the camera's hot shoe contacts and the riser's contacts are clean and free of obstruction.
- Sambungan leupas:
- Re-seat the riser on the camera and the flash on the riser, ensuring all locking mechanisms are fully tightened.
- Inspect the hot shoe mounts for any physical damage or wear that might prevent a secure fit.
- Inconsistent TTL/HSS:
- Confirm that your flash unit and camera system are fully compatible with TTL and HSS when used with the riser.
- As noted in the introduction, TTL and HSS are not supported when used with single-contact flash units.
9. Garansi jeung Rojongan
Kanggo inpormasi garansi, dukungan téknis, atanapi patarosan layanan, mangga tingal ka situs wéb resmi Godox. websitus atanapi hubungi dealer Godox resmi anjeun. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi naon waé.
