ECHTPower Wireless Game Controller

Bubuka

This manual provides detailed instructions for the ECHTPower ES01 wireless game controller. It covers setup, connection, operation of various features, maintenance, and troubleshooting. Please read this manual thoroughly before using your controller to ensure optimal performance and longevity.

For a complete PDF version of this manual, please refer to the official user manual available at ECHTPower ES01 User Manual (PDF).

Eusi pakét

Pastikeun sadaya item aya dina pakét anjeun:

• Wireless Controller x 1
• Kabel Ngecas x 1 (USB-C)
• Buku Panduan x 1

spésifikasi

Parameter Téknis

Platform cocog

• Nintendo Switch (including Switch 2, Switch OLED, Switch Lite)
• PC
• Android
• ios

Layout Controller

Familiarize yourself with the buttons and features of your ECHTPower ES01 controller:

• Tombol imah: Powers on/off the controller, returns to home screen.
• Turbo Button (+ Button): Activates/deactivates turbo functions.
• Screen Capture Button (- Button): Takes screenshots.
• Tombol A/B/X/Y: Tombol aksi baku.
• Left Joystick / L3: Left analog stick, L3 button when pressed.
• Right Joystick / R3: Right analog stick, R3 button when pressed.
• D pad: Pad arah.
• Tombol M: Used for macro programming.
• R/L Buttons: Kancing taktak.
• ZR/ZL Buttons: Tombol pemicu.
• Port Ngecas Tipe-C: Pikeun ngecas controller.
• LED Channel: Indicates connection status and player number.
• Tombol ML/MR: Tombol mundur anu tiasa diprogram.
• Saklar Geter: Adjusts vibration intensity.
• Light Switch Key: Controls RGB lighting.

Setup sareng Sambungan

Aktipkeun Awal

Before initial use, the controller must be charged using the provided USB-C data cable to activate its internal battery.

Daya Hurung/Pareuman

• Daya Hurung: Pencét sakedik Imah kancing.
• Pareum listrik: Pencét sakedik Papasangan kancing.

Connection Methods for Various Devices

Catetan: When connecting to the Switch via wired connection, ensure that the "Settings → Handle and Sensor → Pro Handle Wired Connection" function is enabled on your Switch console.

Parentah Operasi

Turbo Rapid Fire Function

Supported buttons: A/B/X/Y/L/R/ZL/ZR/D-pad

• Turbo Manual: Tahan éta T button, then press and hold one of the supported buttons for 3 seconds. The controller will vibrate once to activate manual rapid fire.
• Turbo otomatis: Tahan éta T button, then press and hold the button already configured for manual rapid fire again for 3 seconds. The controller will vibrate once to activate automatic rapid fire.
• Nonaktipkeun Turbo: Tahan éta T button, then press and hold the button configured for automatic rapid fire again for 3 seconds. The controller will vibrate once to disable the rapid fire function for that button.
• Clear All Turbo Settings: Pencét jeung tahan tombol T button for 3 seconds to clear rapid fire settings for all buttons.
• Pangaluyuan Kacepetan: Rapid fire speed can be adjusted to fast, medium, or slow. Default is slow. Hold the T button on the controller and simultaneously move the right joystick up or down to adjust the speed.

Macro Setting for Back Buttons (ML/MR)

Supported buttons for mapping: A/B/X/Y/L/R/ZL/ZR/L3/R3/D-PAD

• Lebetkeun Modeu Pemrograman: Pencét jeung tahan tombol M button for 2 seconds. The left and right 3D rings will slowly flash (if LED effects are enabled), indicating the controller has entered programming mode.
• Mapping a Button: Press the button you want to program (map). The left and right 3D rings will flash quickly.
• Programming Confirmation: Pencét ML or MR. The left and right 3D rings will change from fast flashing to steady, indicating successful button programming.
• Catetan: You can program up to 16 button inputs. If no button is pressed for more than 1 minute, the controller will automatically exit programming mode.
• Clearing Settings: Sanggeus ngayakeun éta M button for 2 seconds and seeing the left and right 3D rings flash slowly, press ML or MR to clear the programmed back button settings.

Light Adjustment (RGB Lighting)

• Light Key + R3: Switch between 3 lighting modes: Steady, Breathing/Running Horse, Rainbow.
• Light Key + L3:
  • In Steady mode: Switch colors.
  • In Breathing/Running Horse mode: No effect.
  • In Rainbow mode: Pause rainbow effect.
• Reset Lights to Default: Pencét éta + jeung Turbo buttons simultaneously for 3 seconds. The motor will vibrate briefly, and the lights will reset.
• Turn Off/On Joystick Ring Lighting: Press and hold the lighting button for 10 seconds to turn off the 3D joystick ring lighting. Press and hold it again for 10 seconds to reactivate.

Adjustment Geter

• Saluyukeun Inténsitas: After connecting the controller, hold the Saklar Geter button on the back of the controller while moving the left 3D joystick up or down. This will increase or decrease motor vibration intensity. The controller will provide 3 seconds of vibration feedback after adjustment. Four intensity levels are available: 100%, 70%, 30%, and 0%, with 70% set as default.
• Disable/Re-enable Vibration: Pencét jeung tahan tombol Saklar Geter for 10 seconds to disable the vibration function of both motors. Press and hold it again for 10 seconds to re-enable.

Balé Pangaruh Joysticks

The ES01 controller features Hall Effect joysticks, which use electromagnetic sensors for precise position detection, significantly reducing the common issue of joystick drift and enhancing durability.

Ngecas sareng Batré

Ngecas Controller

Connect the provided USB-C charging cable to the controller and a compatible USB power adapter (DC 5V). The charging indicator will glow orange while charging. Once fully charged, the orange indicator will turn off.

Indikator Batré Lemah

When the battery is low, the light of the current channel (player indicator) will flash quickly to remind you to charge the controller.

Modeu sayaga

• Siaga Manual: When the controller is powered on, short press the Papasangan tombol pikeun asup ka modeu standby.
• Automatic Standby (Pairing): If the controller is in pairing mode and fails to pair after 60 seconds, it will automatically enter standby mode.
• Automatic Standby (Inactivity): When connected to a console, the controller will automatically enter standby mode after 15 minutes of inactivity.

Ngareset Controller

If the controller malfunctions or becomes unresponsive, you can perform a reset:

• Pencét jeung tahan tombol Imah button for 10 seconds. This will reset the controller to its default state.

Tip pamaké

• NFC/Amiibo Compatibility: The ECHTPower ES01 controller does not support NFC for Amiibo functionality. Please use official Nintendo controllers if this feature is required.
• Kinerja optimal: For the best gaming experience, ensure your controller is fully charged before extended play sessions.
• Kustomisasi: Experiment with the RGB lighting and vibration settings to find your preferred setup for different games.

Pamérésan masalah

• Controller teu ngabales: Try resetting the controller by holding the Home button for 10 seconds. Ensure it is charged.
• Masalah sambungan: Double-check the connection method for your specific device (refer to the 'Connection Methods' table). For Switch wired connection, verify the 'Pro Handle Wired Connection' setting is enabled.
• Joystick Ngalayang: The ES01 features Hall Effect joysticks designed to prevent drift. If you experience any issues, try resetting the controller. If the problem persists, contact support.
• Lampu teu jalan: Ensure the lighting feature is enabled (Light Key + R3). If still not working, try resetting the lights by pressing + and Turbo simultaneously for 3 seconds.
• Geter Teu Gawé: Check if the vibration function is enabled by holding the Vibration Switch for 10 seconds to toggle it. Adjust intensity if needed.

Garansi sareng Rojongan

The ECHTPower ES01 controller comes with a 12-month warranty for worry-free gaming.

Inpormasi kontak

• Pabrikan: Shenzhen Mike Morgen Technology Co., Ltd
• Alamat: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen
• Telepon: 0755-21010839
• Surélék: service@echtpower.com
• Websitus: www.echtpower.com
• ID FCC: 2A88F-ES01

Our support team is available 24/7 to assist you. We aim to resolve all issues within 24 hours.