1. Bubuka
Hatur nuhun pikeun meuliasing the YUER LED 150W Beam Spot Moving Head Light. This professional stage and DJ lighting fixture is designed to create dynamic and vibrant light shows with its powerful LED source, multiple patterns, colors, and prism effects. This manual provides essential information for safe and effective setup, operation, and maintenance of your device.
2. Émbaran Kasalametan
- Salawasna sambungkeun alat ka colokan listrik grounded.
- Pastikeun catu daya cocog sareng vol anu ditangtukeuntage (AC100-240V, 50-60HZ).
- Ulah muka wadahna; teu aya bagian anu tiasa diservis ku pangguna di jerona. Serahkan sadaya perawatan ka tanaga anu mumpuni.
- Hindarkeun paparan panon langsung kana sumber cahaya.
- Pastikeun ventilasi nyukupan sabudeureun fixture pikeun nyegah overheating.
- Mount the fixture securely to prevent accidental falls.
3. Setélan
3.1 Ngabongkar bungkusan
Carefully unpack the fixture and inspect it for any damage during transit. Retain the packaging materials for future use or transport.
3.2 Pamasangan
The YUER LED 150W Beam Spot Moving Head Light is designed for self-contained installation. Ensure the mounting surface or truss is capable of supporting the weight of the fixture. Use appropriate clamps and safety cables (not included) for overhead installations.
3.3 Sambungan Daya
Connect the fixture to a suitable power source (AC100-240V, 50-60HZ) using the appropriate plug type (EU, US, AU, UK) for your region. The power input is located at the rear of the unit.
3.4 Sambungan DMX (Opsional)
For DMX control, connect a DMX cable from your DMX controller to the DMX IN port on the fixture. If linking multiple fixtures, connect from the DMX OUT of the first fixture to the DMX IN of the next, and so on. Ensure the last fixture in the chain has a DMX terminator installed.
4. Operasi
4.1 Panel kontrol
The fixture features an LCD display and control buttons (MENU, UP, DOWN, ENTER) for navigating settings and selecting operating modes.
4.2 Modeu operasi
- Modeu Self-Propelled: The fixture runs through pre-programmed light sequences automatically.
- Modeu Kontrol Sora: The light effects react to ambient sound or music detected by the built-in microphone.
- Modeu DMX512: Allows for precise control over all functions (pan, tilt, color, patterns, prism, etc.) using an external DMX controller. Refer to the DMX channel chart (typically provided with the product or available from the manufacturer) for detailed control parameters.
- Master-Slave Connection: Link multiple fixtures together. One fixture acts as the master, controlling all other slave units to synchronize effects.
4.3 Pangaruh Cahaya
The YUER LED 150W Beam Spot Moving Head Light offers a variety of effects:
- pola: Features 8 distinct patterns to project.
- Warna: Offers 7 colors plus white for a wide spectrum of lighting.
- Prisma: Includes an 18-prism effect to multiply the beam.
- Rainbow Effect: Creates dynamic color transitions.
5. Pangropéa
5.1 beberesih
Regularly clean the exterior of the fixture with a soft, dry cloth. For the lens, use a soft cloth and a non-abrasive cleaner specifically designed for optical surfaces. Ensure the fixture is powered off and disconnected from the mains before cleaning.
5.2 Pamariksaan
Periodically inspect all mounting hardware, cables, and connections for signs of wear or damage. Replace any damaged components immediately. Do not attempt to repair internal components yourself.
6. Cara ngungkulan
- Henteu aya kakuatan: Check the power cable connection, ensure the power outlet is active, and verify the correct voltage.
- Teu aya Kaluaran Cahaya: Confirm the fixture is powered on and not in a 'blackout' DMX state. Check for any error messages on the LCD display.
- Henteu aya kontrol DMX: Verify DMX cable connections, DMX address settings on the fixture, and ensure the DMX controller is functioning correctly. Check for a DMX terminator on the last fixture.
- Erratic Movement/Effects: This could indicate a DMX signal issue or an internal fault. Try resetting the fixture or checking DMX connections.
Lamun masalah persist, kontak rojongan customer pikeun pitulung.
7. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| Ngaran Brand | Yuer |
| Nomer modél | 150W LED Pindah Kepala |
| Jinis barang | StagÉfék Cahaya |
| kasempetan | Profésional Stage & DJ |
| Sumber Daya | AC |
| Nominal Voltage | 110-220V |
| Voltage | 90-240V |
| Daya (W) | 200W |
| Dupi Bulbs Kaasup | Sumuhun |
| Fluks Luminous | 249-2000 |
| Métode Pamasangan | mandiri |
| Sertifikasi | CE |
| Gaya | DMX Stage Caang |
| Asalna | Daratan Cina |
| Kimia anu prihatin tinggi | Euweuh |
7.1 Package Dimensions & Weight
- Panjangna: 35 cm
- rubak: 35 cm
- Jangkungna: 25 cm
- Beurat: 9.0 kg
8. Jaminan & Dukungan
Yuer is committed to providing quality products and customer satisfaction. For any technical support or warranty inquiries, please refer to the seller's official support channels. The product comes with a service commitment that includes:
- Fast delivery support.
- Security and privacy of personal details.
- Return and refund policy for eligible issues.
For detailed information regarding specific terms and conditions, please consult the official product page or contact the seller directly.
9. Tips pamaké
- When using DMX control, ensure each fixture has a unique address to avoid conflicts.
- Experiment with different patterns and colors to create diverse atmospheres for your events.
- For optimal beam visibility, consider using a fog or haze machine.
