1. Produk Langkungview
The KEYDIY TB Smart Key is a universal remote key designed for various Toyota and Lexus vehicles, featuring an 8A transponder chip and Keyless Go functionality. It is compatible with multiple remote shell shapes, offering a versatile solution for key replacement or upgrade.

This smart key is designed to be customized and programmed to specific vehicle requirements.
2. Eusi Paket
- 1 x KEYDIY TB Smart Remote Key (specific model as ordered)

3. Setup jeung Instalasi
3.1 Cék kasaluyuan
Before proceeding with installation, ensure your vehicle is compatible with the KEYDIY TB Smart Key. This key supports an 8A transponder chip and is suitable for various Toyota and Lexus models. Refer to the specifications section for a detailed list.
3.2 Circuit Board Installation
The KEYDIY TB Smart Key consists of a circuit board that needs to be installed into a compatible remote key shell. The circuit board is designed to fit into four common shapes of remote shells.

- Carefully open your existing compatible remote key shell or a new blank shell.
- Insert the KEYDIY TB Smart Key circuit board into the designated slot within the shell. Ensure it is seated correctly and securely.
- Install a CR2032 coin cell battery into the battery holder on the circuit board (if not already present).
- Close the remote key shell, ensuring all clips snap into place.
3.3 Pemrograman konci
This smart key requires professional programming to function with your vehicle. Programming typically involves specialized diagnostic equipment. It supports FCC ID 0020 and transponder ID P4 88. Programming for FCC ID 2110 and transponder ID P4 88 will be updated soon.
It is recommended to have the key programmed by a qualified automotive locksmith or dealership.

4. Parentah Operasi
Once successfully programmed, your KEYDIY TB Smart Key will perform the following functions:
- Konci: Press the lock button to secure all vehicle doors.
- Buka konci: Press the unlock button to open all vehicle doors.
- Pelepasan Batang: Press the trunk release button to open the vehicle's trunk or tailgate.
- Alarm panik: Press and hold the panic button (if present) to activate the vehicle's alarm system.
- Keyless Go: With the smart key in your possession, you can start the vehicle by pressing the start/stop button without inserting a physical key. You can also lock/unlock doors by touching the door handle (vehicle dependent).
The specific button layout and functions may vary slightly depending on the chosen key shell model (e.g., TB01-3, TB01-4, TB01-5, TB01-6, TB06-2+1, TB06-3, TB06-4, TB36-2, TB36-3, TB36-4, TB42-3, TB42-4).
5. Pangropéa
5.1 Ngagantian batré
The smart key uses a CR2032 coin cell battery. If the remote's range decreases or it stops responding, the battery may need replacement.
- Carefully open the key shell using a small flat-head screwdriver or a specialized key opening tool.
- Leupaskeun batré CR2032 heubeul.
- Selapkeun batré CR2032 anyar kalayan sisi positif (+) nyanghareup ka luhur.
- Close the key shell securely.
5.2 Perawatan Umum
- Avoid exposing the key to water or excessive moisture.
- Keep the key away from extreme temperatures.
- Do not drop the key or subject it to strong impacts.
- Clean the key with a soft, dry cloth if necessary.
6. Cara ngungkulan
6.1 Key Not Responding
- Pariksa batré: Replace the CR2032 battery as described in Section 5.1.
- Reprogramming: If the battery is new and the key still doesn't respond, it might need to be reprogrammed. Consult a professional automotive locksmith or dealership.
- gangguan: Ensure there are no strong radio frequency interferences in the area.
6.2 Reduced Remote Range
- Tingkat batré: Batré anu lemah mangrupikeun panyabab anu paling umum tina jangkauan anu kirang. Ganti batréna.
- Halangan: Physical obstructions between the key and the vehicle can reduce range.
- Faktor Lingkungan: Certain environments (e.g., near cell towers, power lines) can cause interference.
7. Spésifikasi
| Fitur | Rincian |
|---|---|
| merek | KEYDIY |
| Modél Series | TB01, TB06, TB36, TB42 |
| OEM NO. | TB01 KD SMART KEY |
| Bahan | Plastik + Logam |
| Fungsi R/C | Sumuhun |
| Kustomisasi | Sumuhun |
| Chip Transponder | 8A |
| Supported FCC ID (Programming) | 0020, 2110 (for programming) |
| Supported Transponder ID (Programming) | P4 88 |
| Model Mobil cocog | Toyota: Corolla (including HYBRID), RAV4, Camry (including HYBRID), Prado, Levin (including HYBRID), Land Cruiser, Crown Royal, Crown Kulger, Tundra, NX200, NX300, LX570. Lexus: E260, E200, E250, E300. |
| Ukuran Paket (L x W x H) | 15 cm x 15 cm x 10 cm |
| Beurat pakét | 0.05 kg |
8. Garansi jeung Rojongan
For any issues or support inquiries, please contact the seller or manufacturer. This product typically comes with:
- Gratis ngabalikeun artos dina 90 dinten.
- Refunds for lost packages or damaged items.
- Refunds if no delivery within 30 days.
For detailed terms and conditions regarding returns and refunds, please refer to the seller's policy.
9. Tips pamaké
- Pariksa kasaluyuan: Always double-check the compatibility of the specific KEYDIY TB model with your vehicle's make, model, year, and regional specifications (e.g., FCC ID, transponder type) before purchasing and programming.
- Professional Programming: Due to the complexity of modern vehicle security systems, it is highly recommended to have the smart key programmed by a certified automotive locksmith or a dealership to ensure proper functionality and avoid potential damage to your vehicle's immobilizer system.





