1. Produk Langkungview
This document provides essential information for the proper handling, installation, and maintenance of the GF3C0567 Thermal-isolating Polarizer Glass. This component is designed for use in 4-inch LED projectors, including models such as UC40, UC46, and Rigal, to enhance thermal management and optical performance. Please note that this product is an insulation glass lens and not an LCD display.
Figure 1: Thermal-isolating Polarizer Glass Lens
2. Pamariksaan Kompatibilitas sareng Pra-Instalasi
Sateuacan meuliasing or attempting installation, it is crucial to confirm compatibility with your specific projector model. Incorrect selection can lead to improper fit or function. The following information is required for accurate compatibility assessment:
- Size of the Old Glass Lens: Measure the dimensions of the existing polarizer glass in your projector.
- Color of the Old Glass Lens: Observe the color of the existing glass. Note if one side is silver and the other grey, or if both sides are silver.
- Model Number/Words on Ribbon Cable: Locate and photograph the model number or any identifying words printed on the yellow ribbon cable connected to the projector's optical engine. This is a critical identifier.
Failure to provide this information for confirmation before purchase may result in a non-refundable item if it is not suitable for your projector.
Gambar 2: Kelample of a projector ribbon cable for model identification
3. Pedoman instalasi
Installation of the polarizer glass typically involves disassembling the projector's optical engine. Due to the delicate nature of projector components and the precision required, professional installation is highly recommended. If you proceed with self-installation, ensure you have the necessary tools and technical expertise.
- Kasalametan munggaran: Disconnect the projector from all power sources before beginning any disassembly.
- Lingkungan Bersih: Work in a clean, dust-free environment to prevent particles from settling on optical surfaces.
- Nanganan kalayan ati-ati: The polarizer glass is fragile. Handle it by the edges to avoid fingerprints or damage to the optical surface.
- Orientasi: Pay close attention to the orientation of the original polarizer glass before removal. The new glass must be installed in the same orientation.
- Panempatan Aman: Ensure the new polarizer glass is seated correctly and securely within its housing.
4. Pangropéa
The thermal-isolating polarizer glass is a passive component and requires minimal maintenance once installed. However, proper care of the projector can prolong its lifespan and maintain optical clarity.
- Nyegah lebu: Keep the projector in a clean environment and use dust covers when not in use.
- beberesih: If the projector's optical path requires cleaning, use specialized optical cleaning solutions and microfiber cloths designed for lenses. Avoid abrasive materials or harsh chemicals.
- Kontrol Suhu: Ensure the projector operates within its recommended temperature range to prevent overheating, which can degrade optical components over time.
5. Cara ngungkulan
Most issues related to polarizer glass replacement stem from incorrect compatibility or improper installation.
- Image Distortion/Discoloration: If the projected image appears distorted, discolored, or has uneven brightness after installation, it may indicate incorrect orientation of the polarizer glass, dust on the optical surfaces, or an incompatible part. Re-check the installation steps and ensure the glass is clean and correctly oriented.
- Teu Aya Gambar/Gambar Remang-remang: This could be due to severe misalignment or damage during installation. Verify all connections and component placements.
- Masalah kasaluyuan: If the part does not fit or causes immediate operational problems, it is likely an incompatibility issue. Refer back to Section 2 and ensure all pre-installation checks were performed accurately.
If you encounter persistent issues, it is advisable to consult with a qualified projector repair technician.
6. Spésifikasi
| Fitur | Rincian |
|---|---|
| Nomer modél | GF3C0567 |
| Jenis produk | Thermal-isolating Polarizer Glass Lens |
| Brand cocog | Universal (for 4-inch LED Projectors like UC40, UC46, Rigal) |
| Display Size Compatibility | <7 Inch (referring to the projector's display panel size) |
| Screen Type (Projector) | Piezoelectric (as per product attributes, likely referring to the compatible screen technology) |
| Sertifikasi | CE |
| Asalna | Daratan Cina |
| Jinis pakét | Kotak busa |
| Kira-kira. Beurat pakét | 0.25 - 0.65 KG |
7. Tips pamaké
- Order Spares: Given the fragile nature of the glass lens, it is advisable to consider ordering two pieces to have a spare in case of accidental damage during installation or future needs.
- Verify Before Disassembly: Always confirm the correct replacement part before disassembling your projector to minimize downtime and potential damage.
8. Pangrojong sareng Jaminan
For any questions regarding compatibility, installation, or product performance, please contact the seller directly. Information regarding specific warranty terms may be available from the point of purchase.
Seller: QHD Russia-Vip Store
