Sinotimer TM618N-2 Digital Programmable Timer Switch User Manual

1. Bubuka

The Sinotimer TM618N-2 is a versatile digital programmable timer switch designed to automatically control the ON/OFF state of various electrical equipment according to a preset schedule. This device is ideal for applications such as streetlights, neon signs, billboards, home appliances, and industrial automation equipment.

fitur konci ngawengku:

• Up to 16 ON/OFF programs per day, with 15 combinations for weekly scheduling.
• 24-hour / 7-day programmable operation.
• Built-in rechargeable battery for memory backup during power failures.
• Automatic time error correction of +/- 30 seconds per week.
• Easy-to-read 1.6-inch LCD display with LED indicators.
• Countdown timer function ranging from 1 minute to 24 hours.
• Manual ON/OFF control.

The TM618N-2 features a high-accuracy CMOS chip and strong anti-jamming capabilities, ensuring reliable performance and long-term operation with its new brand relay and precision STM chip mounter technology.

2. Spésifikasi

3. Setélan

Before installation, ensure the power supply is disconnected to prevent electric shock. The TM618N-2 timer switch is designed for panel mounting or similar enclosures.

3.1 Diagram Wiring

Refer to the wiring diagram below for proper connection. The timer has five terminals:

• Terminal 1 & 2: Power Input (200-250VAC).
• Terminals 3, 4 & 5: Relay Output. Terminal 3 is Common, Terminal 4 is Normally Closed (NC), and Terminal 5 is Normally Open (NO). Connect your load to the Common terminal (3) and either NO (5) or NC (4) depending on your application's requirement (e.g., for a device to turn ON when the timer activates, use Common and NO).

Pastikeun sadaya sambungan aman sareng saluyu sareng kode listrik lokal.

4. Parentah Operasi

The TM618N-2 features an LCD display and several buttons for programming and control.

4.1 Fungsi Tombol

• JAM: Used to set the current time and day.
• PROG: Enters programming mode to set ON/OFF schedules.
• MINGGU: Selects the day(s) of the week during time setting or program setting.
• JAM: Adjusts the hour during time setting or program setting.
• MIN: Adjusts the minute during time setting or program setting.
• MANUAL: Manually overrides the programmed schedule (ON/AUTO/OFF).
• ngelingan: Recalls or clears a program.

4.2 Nyetél Waktos sareng Dinten Ayeuna

1. Pencét jeung tahan tombol JAM kancing.
2. Bari nyekelan JAM, pencét MINGGU pikeun ngeset dinten ayeuna dina saminggu.
3. Bari nyekelan JAM, pencét JAM pikeun ngeset jam ayeuna.
4. Bari nyekelan JAM, pencét MIN pikeun nyetél menit ayeuna.
5. Ngaleupaskeun JAM button. The time is now set.

4.3 Programming ON/OFF Schedules

The timer supports up to 16 ON/OFF programs. Each program consists of an ON time and an OFF time.

1. Pencét éta PROG tombol sakali. Layar bakal némbongkeun "1 ON".
2. Pencét MINGGU to select the day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or various combinations).
3. Pencét JAM pikeun nyetel jam ON anu dipikahoyong.
4. Pencét MIN pikeun nyetel menit ON anu dipikahoyong.
5. Pencét PROG deui. Layarna bakal némbongkeun "1 OFF".
6. Repeat steps 2-4 to set the desired OFF time for the first program.
7. Terus pencét PROG to cycle through and set additional ON/OFF programs (2 ON, 2 OFF, ..., 16 ON, 16 OFF).
8. Pikeun kaluar tina mode programming, pencét tombol JAM kancing.

4.4 Manual Override

Pencét éta MANUAL button to cycle through the output modes:

• ON: The output is continuously ON, ignoring all programs.
• Otomatis: The output follows the programmed schedule.
• Pareuman: The output is continuously OFF, ignoring all programs.

Pastikeun timer aya dina OTOMATIS mode for programmed schedules to execute.

4.5 Fungsi Countdown

The TM618N-2 includes a countdown timer from 1 minute to 24 hours. Specific instructions for activating and setting the countdown are not detailed in the provided information, but typically involve a dedicated button or a combination with the PROG button. Consult the full product manual if available for precise steps.

5. Pangropéa

The Sinotimer TM618N-2 is designed for low maintenance. Follow these guidelines to ensure longevity:

• beberesih: Ngusap bagian luar ku kaén anu lembut sareng garing. Ulah make cleaners abrasive atawa pangleyur.
• Batré internal: The timer has a built-in rechargeable 1.2V/40mA battery. This battery charges automatically when the timer is connected to power. It retains programmed settings during power outages. If the timer frequently loses settings, the internal battery may need replacement by a qualified technician.
• Lingkungan: Operate the timer within its specified temperature and humidity ranges. Avoid exposure to direct sunlight, extreme temperatures, or excessive moisture.

6. Cara ngungkulan

• Timer not switching ON/OFF:
  • Pariksa naha timerna aya dina OTOMATIS mode. If it's in ON or OFF manual mode, it will override programs.
  • Verify that the power supply to terminals 1 and 2 is active (200-250VAC).
  • Ensure programs are correctly set with valid ON and OFF times and days.
  • Check the load connections to terminals 3, 4, and 5.
• Pintonan kosong atanapi taram:
  • Pastikeun timer nampi daya.
  • The internal battery might be low. Connect the timer to power for several hours to allow the battery to charge.
• Programs are lost after power outage:
  • The internal rechargeable battery may be depleted or faulty. Allow the timer to charge for 24 hours. If the issue persists, the battery may need replacement.
• Time drift:
  • The timer has an auto time error correction of +/- 30 seconds weekly. Minor deviations are normal. If drift is significant, ensure stable power supply.

7. Tips pamaké

Taya tips pamaké husus éta sadia ti ulangviews or Q&A for this product. However, general tips for programmable timers include:

• When setting programs, double-check the AM/PM setting if using a 12-hour format, and ensure the correct days of the week are selected.
• For critical applications, test your programmed schedules thoroughly before relying on them.
• Consider the power consumption of the connected device to ensure it does not exceed the timer's maximum load capacity (16A/250VAC or 20A@30VDC).

8. Garansi jeung Rojongan

8.1 Émbaran jaminan

Produk ieu dilengkepan ku garansi kawates produsén salami 12 bulan pikeun barang anu cacad, teu kalebet barang anu ruksak atanapi disalahgunakeun saatos ditampi. Asesorisna ditangtayungan ku garansi 3 bulan.

Defective items must be reported and returned within the warranty period, preferably in their original packaging. The warranty may be voided if the product shows signs of misuse, unauthorized repair, or damage not attributable to manufacturing defects.

8.2 Rojongan Téknis

For technical assistance, troubleshooting, or warranty claims, please contact the seller or retailer from whom you purchased the product. Provide your order number and a detailed description of the issue for prompt support.

For general inquiries about Sinotimer products, you may visit the manufacturer's website (e.g., www.mcr-inc.us as indicated on some product images). Always refer to your purchase documentation for specific support channels.

9. Aplikasi Examples

The TM618N-2 timer switch is suitable for a wide range of applications, including:

• Kontrol cahaya: Jalan lamps, billboard lighting, LED screen control.
• Manajemén cai: Timing pumping systems.
• Otomatisasi Industri: Control of various automation equipment and instruments.
• Home & Office: Scheduling electrical appliances.