Buku Panduan Instruksi Master Lampu Tangga Miboxer BS64 2 Kawat PLC

1. Bubuka

The Miboxer BS64 is a smart stair light master controller designed to automate stair lighting with advanced features. It utilizes dual PIR sensors to detect movement, automatically illuminating stairs as people pass. The system supports custom lighting patterns via a mobile application (Tuya Smart App) and can also be controlled using a 2.4G RF remote controller. This manual provides detailed instructions for the installation, operation, and maintenance of your BS64 Stair Light Master.

2. Produk Langkungview

2.1 Fitur konci

• Kontrol Bluetooth: Connects to your smartphone via Bluetooth for app control (Tuya Smart App).
• 2-Wire Control: Simplified wiring for installation.
• Skalabilitas: Supports up to 64 stairs.
• Pencahayaan anu tiasa disaluyukeun:
  • Support step time setting.
  • Support delay lights-off time setting.
  • Support night light brightness setting.
  • Support 0-24 hours working time setting to prevent false triggering.
  • 4 light sensing modes.
  • Support SPI strip parameter setting, color calibration, point setting, color and brightness setting.
  • Support setting the CCT (Correlated Color Temperature) and brightness of staircase lights.
• Fitur kaamanan: Short circuit protection and anti-reverse polarity protection.
• Kontrol RF: Compatible with almost all Miboxer 2.4G RF remote controllers.

2.2 Komponén

The Miboxer BS64 system typically includes the following components:

• BS64 Stair Light Master Controller: The central control unit.
• PIR Sensors (Sensor A & Sensor B): Motion detection sensors for automatic light activation.
• Stair Light Sub-device (Dual White Controller, Model: BS-L2C): Individual controllers for each stair light (sold separately).
• Stair Light T-cable: For connecting sub-devices and LED strips (sold separately).
• Sasayogian tanaga: DC24V (not included, must be purchased separately).
• Jalur LED: Compatible SPI LED strips (sold separately).

3. Spésifikasi

3.1 BS64 Stair Light Master Controller

3.2 Stair Light Sub-device (Dual White Controller)

4. Émbaran Kasalametan

• Pastikeun input voltage is DC24V. Incorrect voltage can damage the device and connected lights.
• All wiring should be performed by a qualified electrician or experienced individual.
• Pegatkeun sambungan kakuatan saméméh instalasi atawa perawatan pikeun nyegah shock listrik.
• Do not expose the device to moisture or extreme temperatures outside its specified working range (-10~40℃).
• Ensure proper insulation for all connections.
• Do not exceed the maximum load power of 480W or current of 20A for the master controller.
• The device is rated IP20, meaning it is not protected against water. Install in dry indoor environments only.

5. Instalasi jeung Setup

5.1 Wiring the Master Controller

The BS64 master controller has terminals for power input, light output, SPI output, PUSH switch, and Link button. Refer to the diagram below for correct connections.

• Input: Connect DC24V power supply to V+ and V- terminals.
• Kaluaran: Connect the main power line for the stair lights to the Output V+ and V- terminals.
• SPI Output: Connect the SPI LED strip to the SPI Output terminals (GND, DATA, V+).
• PUSH GND: Connect an optional PUSH switch for manual control.
• Tumbu: Short press 'Link' 1 time to activate link mode of remote. Long press 'Link' 3 seconds, PIR sensor link is done while the light flashes 6 times slowly.

5.2 PIR Sensor Installation

Install Sensor A at the bottom of the stairs and Sensor B at the top. Ensure they have a clear line of sight for motion detection. The PIR sensing distance is 3m.

5.3 Stair Light Sub-device and T-cable Connection

The BS-L2C sub-devices are connected to the LED strips and then integrated into the main wiring using T-cables. Each sub-device controls one stair light segment.

The T-cables facilitate connection between the main power line and individual stair lights. The recommended distance between each step's light connection is 400mm, with a 250mm drop for the light itself.

5.4 Connection Diagrams by Number of Steps

The wiring configuration for the main power supply depends on the total number of steps to ensure adequate power distribution.

Option 1: Under 24 Steps (using 1.5mm² cable)

Power can be supplied from the first step or the last step.

Option 2: 25-36 Steps (using 1.5mm² cable)

Power should be supplied from the middle of the stair run.

Option 3: 37-64 Steps (using 2.5mm² cable)

Power should be supplied from the middle of the stair run, using a thicker 2.5mm² cable for increased current capacity.

6. Operasi

6.1 Kontrol Aplikasi (Tuya Smart App)

1. Download the Tuya Smart App from your device's app store.
2. Pastikeun Bluetooth diaktipkeun dina smartphone Anjeun.
3. Open the app and follow the instructions to add a new device. The BS64 controller should be discoverable via Bluetooth.
4. Once connected, you can customize various settings:
   • Lengkah Waktu: Adjust the duration each step light remains on.
   • Delay Lights-off Time: Set the delay before lights turn off after motion ceases.
   • Night Light Brightness: Configure the brightness level for ambient lighting.
   • Waktos damel: Define specific hours of operation (0-24 hours) to prevent false triggering during certain periods.
   • Light Sensing Modes: Select from 4 available modes for motion detection behavior.
   • SPI Strip Parameters: Fine-tune settings for connected SPI LED strips, including color calibration, pixel point settings, and overall color/brightness.
   • CCT and Brightness: Adjust the Correlated Color Temperature and brightness of the stair lights.

6.2 2.4G RF Remote Control

The BS64 controller is compatible with most Miboxer 2.4G RF remote controllers.

1. Linking the Remote:
   • Short press the 'Link' button on the BS64 controller once to enter linking mode.
   • Within a few seconds, perform the linking procedure on your 2.4G RF remote (refer to your remote's manual for specific instructions, typically involving pressing a 'Link' or 'Pair' button).
   • The stair lights will flash 6 times slowly to indicate successful linking.
2. Once linked, use the remote to control basic functions such as turning lights on/off, adjusting brightness, or changing modes (depending on remote features).

7. Pangropéa

• Keep the controller and sensors clean and free from dust. Use a soft, dry cloth for cleaning.
• Entong nganggo bahan kimia kasar atanapi beberesih kasar.
• Regularly check all wiring connections for tightness and signs of wear or damage.
• Ensure PIR sensors are unobstructed for optimal performance.
• Periodically check for firmware updates for the Tuya Smart App to ensure the best performance and access to new features.

8. Cara ngungkulan

9. Tips pamaké

• For optimal performance, ensure your DC24V power supply is stable and provides sufficient current for all connected LED strips and sub-devices.
• When planning your installation, consider the cable thickness requirements based on the number of steps to avoid voltage leupaskeun sarta mastikeun kacaangan konsisten.
• Experiment with different light sensing modes and delay times in the Tuya Smart App to find the perfect setting for your specific stair environment.
• If using a PUSH switch, ensure it is a momentary type switch connected to the PUSH GND terminals.

10. Garansi jeung Rojongan

The Miboxer BS64 Stair Light Master comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or the manufacturer's customer service. Ensure you have your product model number (BS64) and a detailed description of the issue ready.