Skydroid R10 / R10 Mini Receiver User Manual

1. Bubuka

This manual provides detailed instructions for the Skydroid R10 and R10 Mini receivers, designed for use with Skydroid T12, T10, and SG12 radio transmitters. These receivers are essential components for establishing reliable communication between your remote control and your RC aircraft, enabling precise control and data transmission.

Please read this manual thoroughly before operating your receiver to ensure proper setup, safe operation, and optimal performance.

2. Spésifikasi

2.1 Skydroid R10 Receiver

2.2 Skydroid R10 Mini Receiver

2.3 Spésifikasi Umum

3. Eusi Paket

Paket biasana kalebet barang-barang di handap ieu:

• Skydroid R10 or R10 Mini Receiver (1 piece)
• Antennas (2 pieces, pre-attached or included separately depending on model)
• Connection cables (e.g., SBUS, digital transmission line, camera cable, depending on model and application)

4. Parentah Setup

Follow these steps to properly set up your Skydroid R10 Mini Receiver with your flight control system and camera. The R10 receiver follows a similar connection logic.

4.1 Wiring Diagram (R10 Mini Example)

Refer to Figure 6 for a visual guide on connecting the R10 Mini receiver. Key connections include:

• Receiver to Flight Control: Connect the receiver's SBUS line and digital transmission line to the appropriate ports on your flight controller (e.g., FMU 2.4.8 as shown). Ensure correct polarity and pin assignments.
• Camera to Receiver: Connect the camera cable from your FPV camera to the designated camera input on the receiver.
• kakuatan: Ensure the flight control system is powered correctly, which will in turn power the receiver.

4.2 Prosedur papasangan

1. Power On Flight Control: Ensure your flight control system is powered on. This will also power the connected receiver.
2. Initiate Pairing on Receiver: Press the counter button (pairing button) on the receiver. The green indicator light on the receiver should flash quickly, indicating it is in pairing mode.
3. Power On Remote Control: Turn on your Skydroid T12, T10, or SG12 radio transmitter.
4. Konfirmasi pasangan: Once pairing is successful, the green indicator light on the receiver will stop flashing and remain steadily on. A "drip" sound from the remote control may also confirm successful pairing.

5. Parentah Operasi

After successful setup and pairing, you can begin operating your RC aircraft.

1. Connect Remote Control to Data Line: Plug your remote control into its data line (e.g., USB cable) and connect it to your ground station device (e.g., smartphone or tablet running the Skydroid FPV app).
2. Verify Image and Data: Check the ground station display to ensure that the video feed from the camera is visible and that telemetry data is being received.
3. Cék Pra-Hiber: Before flight, always perform comprehensive pre-flight checks, including verifying control surface movements, motor response, and battery levels.
4. Operasi hiber: Operate your RC aircraft according to standard safety procedures and local regulations.

6. Pangropéa

To ensure the longevity and reliable performance of your Skydroid receiver, follow these maintenance guidelines:

• Tetep Bersih: Regularly inspect the receiver for dust, dirt, or debris. Use a soft, dry brush or compressed air to gently clean the unit. Avoid using liquids or solvents.
• Ngajaga tina Unsur: Keep the receiver away from moisture, extreme temperatures, and direct sunlight. Ensure it is properly housed within your aircraft to protect it from physical damage.
• Pariksa sambungan: Periodically check all wiring connections for secure fit and signs of wear or damage. Loose connections can lead to signal loss.
• Penempatan anteneu: Ensure antennas are positioned correctly and are not obstructed by carbon fiber or other conductive materials, which can degrade signal quality.
• Pembaruan firmware: Check the official Skydroid website or app for any available firmware updates for your receiver and transmitter. Keeping firmware up-to-date can improve performance and add new features.

7. Cara ngungkulan

If you encounter issues with your Skydroid receiver, refer to the following common troubleshooting steps:

• No Signal/No Pairing:
  • Ensure both receiver and transmitter are powered on.
  • Pastikeun sadaya sambungan kabel aman sareng leres.
  • Re-attempt the pairing procedure carefully.
  • Pariksa gangguan ti alat 2.4GHz séjén.
  • Ensure the receiver's green light is flashing quickly during pairing attempt.
• Leungitna Sinyal Intermiten:
  • Check antenna placement; ensure they are not shielded or damaged.
  • Inspect for physical damage to the receiver or antennas.
  • Ensure the operating environment is free from excessive RF interference.
• Henteu aya feed pidéo:
  • Verify the camera cable connection between the camera and the receiver.
  • Ensure the camera itself is powered and functioning.
  • Check the ground station app settings for video input.
• Teu aya Data Telemetri:
  • Confirm the digital transmission line connection between the receiver and flight controller.
  • Check flight controller settings for telemetry output.
  • Ensure the ground station app is correctly configured to receive telemetry.

If problems persist, consult the Skydroid official support resources or contact your retailer.

8. Tips pamaké

Based on general user experiences with RC receivers:

• Orientasi anteneu: For optimal signal reception, try to position the receiver antennas at a 90-degree angle to each other, away from large metal objects or carbon fiber frames.
• Uji rentang: Always perform a range test before flying, especially in a new location, to ensure reliable control link.
• Sumber Daya: Ensure your receiver receives a stable power supply within its specified voltage range to prevent unexpected shutdowns or glitches.

9. Garansi jeung Rojongan

Skydroid products are typically covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, duration, and claim procedures, please refer to the documentation provided with your purchase or visit the official Skydroid websitus.

For technical support, troubleshooting assistance beyond this manual, or inquiries about spare parts, please contact your authorized Skydroid dealer or the Skydroid customer service directly.