DOORHAN TRANSMITTER - 2 PRO / TRANSMITTER4

DOORHAN TRANSMITTER - 2 PRO / TRANSMITTER4 Gate Door Remote Control

Manual Parentah pangguna

1. Bubuka

This manual provides detailed instructions for the setup, operation, and maintenance of your DOORHAN TRANSMITTER - 2 PRO / TRANSMITTER4 wireless remote control. This device is designed for convenient and secure operation of DOORHAN gate and garage door openers, utilizing a 433MHz rolling code frequency for enhanced security.

The remote control is available in 2-button and 4-button configurations and is compatible with all DOORHAN models, including TRANSMITTER 2, TRANSMITTER 4, TRANSMITTER -2 PRO, TRANSMITTER -4 PRO, and Premium RC black 4.

DOORHAN Remote Controls (2-button and 4-button versions) with 433MHz frequency and included battery.

Image: DOORHAN Remote Controls (2-button and 4-button versions) with 433MHz frequency and included battery.

2. Eusi Paket

Mangga parios pakét sacara saksama pikeun mastikeun yén sadaya barang aya:

  • 1x Remote Control (Battery included)
  • 1x English Manual (Quick Guide)
  • 1 x Lanyard
  • 1x Backup Battery
  • 1x Blister Box (packaging)
Package contents: Blister box, Instructions (Quick Guide), Remote control, Lanyard, Backup battery.

Image: Package contents including remote, quick guide, lanyard, and backup battery.

3. Spésifikasi

Fitur Spésifikasi
Jumlah Saluran 2 atawa 4
Frékuénsi 433MHz / 433.92MHz
Jenis Pamrograman Programming with Receiver
Kodeu Kodeu Rolling
Rentang Gawé 30-150 meters (depending on environment)
Kasaluyuan All DOORHAN models
Sertifikasi CE
Ukuran (approx.) 54mm x 33mm x 10mm
Diagram showing dimensions and specifications of the DOORHAN remote control.

Image: Dimensions and key specifications of the remote control.

4. Setup (Programming)

To program your new DOORHAN remote control, you will need to pair it with your gate or garage door opener's receiver. The programming procedure is similar to that of original DOORHAN Transmitter 4 remotes. Always refer to your receiver's user manual for specific instructions, as procedures may vary slightly between models. For a typical DOORHAN Garage Control Panel, follow these steps:

  1. Press and release the button 'R' on the receiver.
  2. The left side of the display panel on the receiver will show '0' and then disappear immediately.
  3. Press any button on your new remote control twice. Coding is now completed.
  4. Press the transmitter button again to test operation. The gate or garage door should respond.

Catetan:

  • To remove a single transmitter's code or all transmitter codes from the receiver memory, please refer to your receiver manual.
  • Ensure you are within range of the receiver during the programming process.
Image displaying both 2-button and 4-button DOORHAN remote controls, highlighting compatibility with TRANSMITTER-2 PRO and TRANSMITTER4 models.

Image: DOORHAN remote controls, compatible with various models.

5. Parentah Operasi

Once programmed, operating your DOORHAN remote control is straightforward:

  • Aktipkeun: Press the desired button on the remote control to activate your gate or garage door opener.
  • rentang: The remote operates within a range of 30-150 meters, depending on environmental conditions and obstacles.
  • Sababaraha Alat: If you have a 4-button remote and multiple DOORHAN devices (e.g., two garage doors, a gate, and an alarm), you can program each button to control a different device.
Pahareup-hareup view of the 4-button DOORHAN remote control.

Image: Close-up of the 4-button remote control.

6. Pangropéa

Ngagantian batré

The remote control uses a standard coin cell battery (typically CR2032). When the remote's range decreases significantly or it stops responding, it's likely time to replace the battery.

  1. Buka remot kontrol kalayan ati-atiasing. This may require a small screwdriver or prying tool.
  2. Remove the old battery, noting its orientation (positive (+) side up).
  3. Lebetkeun batré CR2032 anyar kalayan sisi positif (+) ngadep ka luhur.
  4. Close the remote control casing aman.

Perawatan Umum

  • Jaga remot kontrol tetep garing sareng jauh tina suhu anu ekstrim.
  • Hindarkeun leupaskeun kadali jauh atanapi tunduk kana tabrakan anu kuat.
  • Clean the remote with a soft, dry cloth if necessary. Do not use harsh chemicals.

7. Cara ngungkulan

  • Jauh teu tiasa dianggo saatos program:
    • Ensure the remote's battery is fresh and correctly installed.
    • Repeat the programming steps carefully, ensuring the receiver acknowledges the remote.
    • Check your receiver's manual for any specific programming nuances or error codes.
  • Rentang operasi anu dikirangan:
    • Ganti batré kadali jauh.
    • Check for any new sources of radio interference near your gate/garage door opener.
    • Ensure there are no new large metallic objects obstructing the signal path.
  • Jauh dianggo intermittently:
    • This often indicates a low battery. Replace it.
    • Check for loose connections inside the remote if you have opened it previously.

8. Tips pamaké

Taya tips pamaké husus éta sadia ti ulang customerviews or Q&A for this product. However, general tips for remote controls include:

  • Keep a spare battery on hand for quick replacement.
  • Store the remote in a consistent, easily accessible location (e.g., car visor clip, key chain) to avoid misplacing it.
  • If you have multiple remotes, label them to easily identify which controls which device.

9. Garansi jeung Rojongan

For any issues or support inquiries regarding your DOORHAN remote control, please contact the seller or manufacturer directly. Keep your purchase records handy as they may be required for warranty claims or technical assistance.

This product is manufactured by Shenzhen Sarik Technology Co.,Ltd.

Dokumén Patali - TRANSMITTER - 2 PRO / TRANSMITTER4

Praview DOORHAN TRANSMITTER 4 Remote Control Programming Manual
Step-by-step instructions for programming the DOORHAN TRANSMITTER 4 remote control for barrier and gate systems. This guide ensures easy setup and operation.
Praview DoorHan PCB-SL Control Board Programming na Guide Sambungan Listrik
Pitunjuk komprehensif pikeun papan kontrol DoorHan PCB-SL, nyertakeun sambungan listrik, setélan switch DIP, program pamancar, sareng panyesuaian régulator mékanis pikeun sistem otomatisasi gerbang.
Praview DoorHan WiFi Accessories: Smart Control for Your Garage Doors
Explore the DoorHan range of WiFi accessories, including the Magic WiFi Plug, External WiFi RE Receiver, and External WiFi CONTROL. Enhance your garage door operation with smart, remote control capabilities via the Tuya app.
Praview DoorHan SHAFT-50 Manual Instalasi Operator
Manual ieu nyadiakeun parentah lengkep pikeun instalasi, adjustment, sarta operasi operator otomatis DoorHan SHAFT-50 pikeun lawang industri jeung komérsial sarta Gerbang.
Praview DoorHan GSM-MODULE 3.0 Manual Pamaké sarta Téknis Guide
Manual pamaké komprehensif pikeun DoorHan GSM-MODULE 3.0, ngawengku informasi umum, diagram sambungan, spésifikasi teknis, sarta programming via PC jeung paréntah SMS. Ngawengku parentah setelan sareng tips ngungkulan.
Praview DoorHan Ovladači Modul WIFI RE: Návod k Programování a Instalaci
Komplexní průvodce programováním a instalací ovládacího modulu DoorHan WIFI RE. Obsahuje obecné informace, elektrické připojení a podrobné instrukce k programování pomocí mobilní aplikace.