MAIMEIMI Multifunctional 6IN1 Digital 85mm Gauge

MAIMEIMI Multifunctional 6-in-1 Digital Gauge User Manual

model: Multifunctional 6IN1 Digital 85mm Gauge

merek: MAIMEIMI

1. Produk Langkungview

The MAIMEIMI Multifunctional 6-in-1 Digital Gauge is a versatile instrument designed for automotive and marine applications. It integrates six essential functions into a single 85mm display: GPS Speedometer, Tachometer, Fuel Level Gauge, Oil Pressure Gauge, Water Temperature Gauge, and Battery Voltage Meter. This gauge provides real-time data to help you monitor your vehicle's or boat's performance and critical parameters, ensuring safe and efficient operation. Its waterproof design makes it suitable for various environments.

MAIMEIMI 6-in-1 Digital Gauge displaying various parameters like fuel, oil pressure, water temp, voltmeter, tripmeter, tachometer, ODO, RPM rate, and GPS speedometer.
Gambar 1: Leuwihview of the 6-in-1 Digital Gauge Display

2. Spésifikasi

Fitur Spésifikasi
GPS Speedometer Range 0-600 km/h, MPH, Knots
Rentang Tachometer 0~9999 rpm
Engine Oil Pressure Range 0~10 bar, 0~150 PSI
Engine Temperature Range 40~120℃, 100~250℉
Batré Voltage Rentang 9 ~ 32V
Fuel Level Display 0~100%
Total Jam Mesin 0.0-99999.9H
Item Beurat 350g
Item Dimensions (H x W x L) 85mm x 85mm x 85mm
Bahan palastik
Fitur husus Tahan cai
Asalna Daratan Cina

3. Setup jeung Instalasi

3.1 Eusi pakét

  • MAIMEIMI 6-in-1 Digital Gauge
  • Antena GPS
  • Diiringkeun kabel
  • Cingcin ningkatna
  • Manual pangguna (dokumén ieu)
Contents of the MAIMEIMI 6-in-1 Digital Gauge package, including the gauge, GPS antenna, and manual.
Gambar 2: Eusi pakét

3.2 Instalasi fisik

  1. Choose a suitable location on your dashboard or panel for the 85mm gauge.
  2. Cut an 85mm diameter hole in the chosen location.
  3. Selapkeun gauge kana liang.
  4. Secure the gauge using the provided mounting ring from the back of the panel.
Tukangeun view of the MAIMEIMI 6-in-1 Digital Gauge showing the threaded body and wiring connections.
Gambar 3: Tukangeun View of the Gauge for Installation

3.3 Sambungan Wiring

Refer to the wiring diagram below for proper connection. Ensure all connections are secure and insulated to prevent short circuits.

Wiring diagram for the MAIMEIMI 6-in-1 Digital Gauge. Connections include Black: Ground(-), Red: 9-32VDC(+), Blue: RPM Signal, Yellow: Temperature Signal, White: Oil Pressure Signal, Brown: Fuel Level Signal, Green: External Keys.
Gambar 4: Diagram Kabel
  • 1 Hideung: Taneuh (-)
  • 2 Beureum: 9-32VDC (+)
  • 3 Biru: Sinyal RPM
  • 4 Konéng: Sinyal Suhu
  • 5 White: Oil Pressure Signal
  • 6 Brown: Fuel Level Signal
  • 7 Héjo: External Keys (for unit changes and settings)

Connect the GPS antenna to the designated port on the back of the gauge.

4. Parentah Operasi

4.1 Daya Hurung/Pareuman

The gauge will power on automatically when connected to a 9-32VDC power source. It will power off when the power source is disconnected.

4.2 Fungsi tampilan

The gauge displays the following information:

  • Tingkat BBM: Persentage of fuel remaining.
  • Tekanan Minyak: Engine oil pressure in Bar or PSI.
  • Voltmeter: Batré voltage di Volt.
  • Suhu cai: Engine water temperature in ℃ or ℉.
  • GPS spedometer: Current speed in km/h, MPH, or Knots.
  • Tripmeter: Distance traveled for the current trip.
  • ODO: Total odometer reading (total distance traveled).
  • Tachometer: Engine RPM.
  • Engine Hours: Total engine operating hours.
  • RPM Rate: Current RPM rate.

4.3 Ngarobah Unit

The units for speed, temperature, and pressure can be changed using the external keys (Green wire). Press the external key to cycle through available units:

  • Laju: km/h, MPH, Kont (Nautical Miles per Hour)
  • Suhu: ℃ (Celsius), ℉ (Fahrenheit)
  • Tekanan: Psi, Bar
Diagram showing how to change units on the gauge display for temperature (Fahrenheit/Celsius), pressure (Psi/Bar), and speed (km/h/MPH/kont).
Figure 5: Unit Change Options

4.4 Setélan alarem

The gauge features pre-set alarms for critical parameters:

  • Tekanan Minyak: Alarm triggers if pressure drops below 0.8 Bar.
  • Suhu cai: Alarm triggers if temperature exceeds 95℃.
  • Voltage: Alarm triggers if voltage pakait handap 11.8V.
  • Tingkat BBM: Alarm triggers if fuel level drops below 13%.

These alarms are designed to alert the user to potential issues, allowing for timely intervention.

4.5 Video Demonstrasi Produk

Video 1: Product demonstration showing installation, unit changes, and waterproof testing.

5. Pangropéa

  • beberesih: Ngagunakeun lemes, damp cloth to clean the display and exterior. Avoid abrasive cleaners or solvents.
  • Sambungan: Périodik pariksa sagala sambungan wiring pikeun mastikeun aranjeunna aman tur bebas tina korosi.
  • Fitur waterproof: The gauge is designed to be waterproof. However, avoid prolonged submersion or high-pressure water jets directly on the unit.
The MAIMEIMI 6-in-1 Digital Gauge partially submerged in water, demonstrating its waterproof capability.
Figure 6: Waterproof Demonstration

6. Cara ngungkulan

  • Henteu aya kakuatan: Check the 9-32VDC power connection (Red wire) and ground connection (Black wire). Ensure the power source is active.
  • Bacaan teu akurat:
    • GPS spedometer: Pastikeun anteneu GPS disambungkeun leres tur boga jelas view of the sky. Allow time for GPS signal acquisition.
    • Sensor séjén: Verify that the respective sensor wires (RPM, Temperature, Oil Pressure, Fuel Level) are correctly connected to their senders and the gauge as per the wiring diagram (Figure 4).
  • Masalah tampilan: If the display is blank or flickering, check power connections and ensure the operating voltage aya dina kisaran 9-32V.
  • Tombol teu responsif: Ensure the external keys (Green wire) are properly connected and not damaged.

7. Garansi jeung Rojongan

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For technical support or warranty claims, please contact your retailer or the manufacturer directly. Please have your purchase information and product model number available when seeking support.

Dokumén Patali - Multifunctional 6IN1 Digital 85mm Gauge

Praview Mobil Smart Digital Méter P8 Pamaké Manual - OBD2 + GPS HUD
Manual pamaké komprehensif pikeun MAIMEIMI P8 Car Smart Digital Méter, nampilkeun fungsi OBD2 sareng GPS. Diajar ngeunaan pamasangan, setelan, pungsi, ngungkulan masalah, sareng FAQs pikeun Head-Up Display ieu.
Praview MAIMEIMI 52MM Fuel Level Gauge Owner's Manual and Installation Guide
Detailed owner's manual and installation guide for the MAIMEIMI 52MM Fuel Level Gauge. Includes wiring diagrams, technical specifications, and setup instructions for automotive and marine applications.
Praview MAIMEIMI M3 Car Head Up Tampilan Manual Pamaké
Comprehensive user manual for the MAIMEIMI M3 Head Up Display (HUD). This guide covers product introduction, key features, button operations, detailed settings configuration, and troubleshooting common issues for this automotive accessory.
Praview MAIMEIMI OBD Smart Digital Device P10 User Manual and Features
Comprehensive guide to the MAIMEIMI OBD Smart Digital Device Model P10, detailing its functions, features, installation, technical parameters, and troubleshooting for car diagnostics. Learn how to use this device to monitor vehicle speed, engine RPM, fuel consumption, and detect error codes.
Praview MT0061 MAIMEIMI Motor Speedometer Manual Pamaké
Manual pamaké pikeun MAIMEIMI MT0061 LED Digital Motor Speedometer, detailing fitur na, indikator tampilan, sarta sambungan kabel. Cocog sareng model Honda CG125, Fan 125, sareng Titan 125 (2000-2013).
Praview MAIMEIMI Smart Steering Wheel Controller User Manual and Installation Guide
Comprehensive user manual and installation guide for the MAIMEIMI Smart Steering Wheel Controller. Learn how to connect and program the wireless remote to your car's navigation system for enhanced control. Includes wiring diagrams and setup instructions.