AVATTO ZigBee3.0 Dongle Plus Universal Gateway Hub Instruction Manual

1. Produk Langkungview

The AVATTO ZigBee3.0 Dongle Plus is a universal gateway hub designed to integrate various Zigbee devices into your smart home ecosystem. It supports multiple protocols and mainstream brands, enabling comprehensive smart home automation with platforms like Tasmota, ZigBee2MQTT, and Home Assistant.

2. Eusi Paket

Mangga parios pakét kanggo barang-barang ieu:

• AVATTO ZigBee3.0 Dongle Plus Gateway Hub
• USB Type-C Cable (for power)
• Manual pangguna (dokumén ieu)

3. Parentah Setup

3.1 Powering dina Alat

1. Connect the provided USB Type-C cable to the power port on the dongle.
2. Connect the other end of the USB cable to a 5V 1A USB power adapter (not included) or a compatible USB port.
3. The device will power on, and the status LEDs will indicate its initial state.

3.2 Initial Pairing (WiFi)

To connect the gateway to your WiFi network:

1. Pastikeun alat diaktipkeun.
2. Press and hold the button on the dongle for 5 seconds to enter WiFi pairing mode. The Red LED (WiFi status) should indicate pairing mode (e.g., blinking rapidly).
3. Follow the instructions provided by your chosen smart home platform (Tasmota, ZigBee2MQTT, or Home Assistant) to discover and connect the gateway to your WiFi network.

3.3 LAN Wireless Connection

The gateway can operate within your local area network (LAN). Once connected to your WiFi, it obtains an IP address and forms a local network for communication with your smart home system.

3.4 Connecting Zigbee Sub-Devices

The AVATTO ZigBee3.0 Dongle Plus supports up to 50 Zigbee sub-devices, enabling comprehensive smart home integration.

1. Ensure your gateway is successfully connected to your smart home platform.
2. Put your Zigbee sub-device into pairing mode (refer to the sub-device's manual).
3. Initiate device discovery within your smart home platform (e.g., Home Assistant, Zigbee2MQTT).
4. Once discovered, configure the sub-device as needed within your platform.

4. Ngoperasikeun Gerbang

4.1 Smart Zigbee Gateway Features

The gateway provides several core functionalities for smart home management:

• Kontrol Grup: Manage multiple Zigbee devices simultaneously.
• Equipment Linkage: Create automation rules and scenarios between different devices.
• Setting Scenarios: Define custom scenes for various home activities (e.g., 'Good Morning', 'Away').
• App Push: Receive notifications and alerts from your Zigbee devices via your smart home app.

4.2 Home Assistant Integration

The gateway is designed to work seamlessly with Home Assistant, supporting multiple protocols and mainstream brands. It acts as a bridge for various Zigbee devices to communicate with your Home Assistant instance.

4.3 Kontrol sora

The gateway can be integrated with popular voice assistants for convenient control of your smart home devices. This typically requires a bridge plug-in or specific configuration within your smart home platform.

• Siri
• Amazon Alexa
• Imah Google
• Xiao ai classmate
• Tmall Genie

5. Pangropéa

The AVATTO ZigBee3.0 Dongle Plus is designed for low maintenance. Keep the device in a clean, dry environment and avoid extreme temperatures. Periodically check for firmware updates through your chosen smart home platform to ensure optimal performance and security.

6. Cara ngungkulan

6.1 Indikator LED Status

• LED Beureum: Indicates WiFi status. Refer to your platform's documentation for specific blinking patterns.
• LED biru: Indicates Zigbee signal status.

6.2 Isu umum jeung Solusi

• Device not responding/not working:
  • Ensure the device is properly powered via the Type-C port.
  • Check the Red LED for WiFi connectivity status. If it's not connected, try re-entering WiFi pairing mode by holding the button for 5 seconds.
  • Verify your smart home platform (Home Assistant, Zigbee2MQTT, Tasmota) is running correctly and configured to communicate with the gateway.
  • Ensure your router is functioning and the gateway is within WiFi range.
• Zigbee devices not pairing:
  • Ensure the gateway is successfully connected to your smart home platform.
  • Verify the Zigbee sub-device is in pairing mode.
  • Check the Blue LED for Zigbee signal activity during pairing.
  • Ensure the sub-device is within range of the gateway.
• Konéktivitas intermiten:
  • Check for WiFi interference from other devices.
  • Relocate the gateway to a more central position or closer to frequently used Zigbee devices.
  • Pastikeun catu daya stabil.

7. Spésifikasi

8. Garansi jeung Rojongan

This product comes with a 1-year warranty from the date of purchase. For technical support, troubleshooting assistance, or warranty claims, please contact AVATTO customer service through the retailer's platform or the official AVATTO websitus.

9. Tips pamaké

• Catu daya stabil: Always use a stable 5V 1A power source to ensure consistent performance of the gateway.
• Stabilitas Jaringan: A reliable WiFi network is crucial for the gateway's operation. Ensure your router is functioning well and the gateway is within optimal signal range.
• Papasangan deui: If you encounter issues with the device not functioning, try re-pairing it to your WiFi network by holding the button for 5 seconds. This can often resolve connectivity problems.
• Platform Documentation: For detailed integration and configuration, always refer to the official documentation of your chosen smart home platform (Home Assistant, Zigbee2MQTT, Tasmota).
• Multiple Gateways: For larger homes or areas with many Zigbee devices, consider using multiple gateways to ensure comprehensive coverage and robust connectivity.