1. Bubuka
The VGN Flying Dragon Y2 Pro Max Ultra is an ultra-lightweight ergonomic gaming mouse designed for high-performance esports. It features multi-mode connectivity (Bluetooth, 2.4G wireless, and wired), a high-precision PAW3950 sensor, and supports a dual 8K polling rate for exceptional responsiveness. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new gaming mouse.
2. Setélan
2.1. Eusi Paket
Sateuacan anjeun ngawitan, pastikeun sadaya item aya dina pakét anjeun:
- VGN Flying Dragon Y2 Gaming Mouse
- 8K Nano Receiver (for Pro/Pro+ models) or Standard 8K Receiver (for Ultra/Ultra+ models)
- USB Data Cable (Umbrella rope data line)
- USB Adapter (for Pro/Pro+ models)
- Manual pamaké
- Bantalan Suku Cadangan
- Stiker Anti-selip
2.2. Ngecas Mouse
The VGN Flying Dragon Y2 mouse features a self-developed V-Charge Flash Charge Protocol. To charge your mouse:
- Connect the provided USB data cable to the USB-C port on the front of the mouse.
- Connect the other end of the cable to a computer USB port or a 5V/2A (10W) charger.
Catetan: Only 500mAh and 800mAh battery models support fast charging. 250mAh battery models do not. Battery life may vary depending on the model and usage environment. It is recommended to use a computer USB port or a 5V/2A (10W) charger. Do not use high-power chargers to extend battery life and ensure safety.
2.3. Modeu konektipitas
The mouse supports three connection modes: Wired, 2.4G Wireless, and Bluetooth.
- Mode Kabel: Connect the mouse directly to your computer using the provided USB data cable.
- Modeu Nirkabel 2.4G: Insert the 8K receiver into an available USB port on your computer. The mouse should automatically connect.
- Mode Bluetooth: Activate Bluetooth on your computer or device. Put the mouse into Bluetooth pairing mode (refer to the mouse's specific button combination for pairing, usually a button on the underside). Select the mouse from your device's Bluetooth settings to pair.
3. Parentah Operasi
3.1. Adjustment DPI
The mouse features a dedicated DPI adjust button, allowing you to cycle through different sensitivity settings. The DPI range varies by sensor:
- Sénsor PAW3395: 50-26000 DPI (overclocking up to 36000)
- Sénsor PAW3950: 50-30000 DPI (overclocking up to 42000)
3.2. Laju Polling
The VGN Flying Dragon Y2 supports a dual 8000Hz wired/wireless report rate for ultra-fast response times. To ensure optimal performance at 8000Hz, your computer system should meet the following recommendations:
| komponén | Platform Intel | Platform AMD |
|---|---|---|
| CPU | i7-9700K and above | Rullong 73700X and above |
| Kartu Grafis | NVIDIA RTX2060 and above | MDRX5700XT and above |
| Mémori | 16GB jeung luhur | |
| tampilan | Screen refresh rate above 240Hz | |
3.3. V-HUB Software
The VGN Flying Dragon Y2 mouse utilizes a self-developed V-HUB dual-driver (web/Windows client) for comprehensive management. This software allows you to:
- Edit mouse buttons
- Adjust DPI settings
- Configure report rate
- Manage macros
- Utilize onboard storage for profiles
3.4. Ergonomis sareng Cepengan
The mouse features an ultra-lightweight design (approximately 41g ±2g for some models) and an ergonomic shape, providing a comfortable and stable grip for extended use. It is designed to fit various hand sizes and grip styles, including finger grip, claw grip, and palm grip.
4. Pangropéa
To ensure the longevity and optimal performance of your VGN Flying Dragon Y2 mouse, follow these maintenance guidelines:
- beberesih: Use a soft, dry cloth to clean the mouse surface. Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the coating.
- Stiker Suku: The mouse comes with 100% Teflon foot stickers for smooth glide. If these wear out, you can replace them with the spare set provided.
- Panyimpenan: Simpen beurit di tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
5. Cara ngungkulan
- Mouse teu ngabales:
- Pastikeun mouse tos dicas.
- Check the connection: If wired, ensure the USB cable is securely plugged in. If 2.4G wireless, ensure the receiver is plugged in and the mouse is in 2.4G mode. If Bluetooth, ensure the mouse is paired and in Bluetooth mode.
- Coba sambungkeun ka port USB atanapi alat anu béda.
- Sambungan anu intermiten atanapi lag:
- For wireless modes, ensure the receiver is close to the mouse and there are no major obstructions or sources of interference (e.g., other wireless devices, large metal objects).
- Ensure your system meets the recommended specifications for 8000Hz polling rate. If not, consider reducing the polling rate in the V-HUB software.
- Masalah ngecas:
- Ensure the USB cable is properly connected to both the mouse and the power source.
- Use a computer USB port or a 5V/2A (10W) charger. Avoid using chargers with higher power output than recommended.
- If the mouse has a 250mAh battery, note that it does not support fast charging.
- adjustment DPI teu jalan:
- Pastikeun beurit diaktipkeun.
- If using the V-HUB software, ensure the settings are applied correctly.
6. Spésifikasi
The VGN Flying Dragon Y2 series offers various models with slightly different specifications. Below is a comprehensive table of product parameters:
| Fitur | Feilong Y2 Pro Max | Feilong Y2 Master Edition | Feilong Y2 Master Fast Charging Edition | Feilong Y2 Ultra |
|---|---|---|---|---|
| Modél | Y2 Pro Max | Y2 Master | Y2 Master Fast Charging | Y2 Ultra |
| Ukuran | 119 * 63.3 * 39.4 mm | |||
| Lapisan permukaan | New skin-friendly coating / Ice Feeling Coating | |||
| Sénsor | PAW3395 Extreme | PAW3950 Extreme | ||
| Chip Control Utama | CX52860 | Nordik 52840 | ||
| Button Delay | Sahenteuna 0.4ms | Sahenteuna 0.263ms | As low as approximately 0.175ms | |
| Modeu Sambungan | Wired/2.4G/Bluetooth Triple Mode | |||
| Beurat | 51±2g | 53±2g | 47±2g | 41±2g |
| Laju mulang | Wired/Wireless 8K Refresh Rate | |||
| Kapasitas batré | 800 mah | 800 mah | 500 mah | 500 mah |
| Kahirupan Batré (1KHz) | 224 jam | 700 jam | 324 jam | 120 jam |
| Téknologi Ngecas Gancang | Teu Dirojong | Dirojong | ||
| Left & Right Fretting | Huannuo 0.1 billion times mechanical micro-movement | Omron light fretting 0.1 billion times optical micro-movement | ||
| Roller Encoder | TTC dust-proof gold wheel | |||
| Stiker Suku | 100% Teflon Foot Sticker | |||
| Rentang DPI | 50-26000 (overclocking up to 36000) | 50-30000 (overclocking up to 42000) | ||
| panarima | Standard 8K Nano receiver + adapter | Standard 8K large receiver | ||
| Ngajalankeun | Vhub web page/client driver | |||
7. Tips pamaké
- Optimalkeun Laju Polling: For the best experience with the 8000Hz polling rate, ensure your computer meets the recommended specifications (CPU, GPU, RAM, and display refresh rate). If your system is below these requirements, consider reducing the polling rate to 1000Hz or 2000Hz for a smoother and more stable gaming experience.
- Ngecas anu leres: Always use a computer USB port or a certified 5V/2A (10W) charger for charging. Avoid using unverified or high-power chargers to protect the battery and ensure safety.
- Kustomisasi parangkat lunak: Candak advantage of the V-HUB software to customize button assignments, DPI settings, and macros to suit your personal gaming style and preferences.
8. Garansi jeung Rojongan
For product-driven downloads, software, and other services, please visit the official VGN websitus: www.vgnlab.com.cn.
If you encounter any issues or require further assistance, please contact the seller or authorized support channels.
