Fujitsu S26113-E567-V50-02 DPS-500XB A Server Power Supply User Manual

Bubuka

This manual provides essential information for the proper installation, operation, and maintenance of the Fujitsu S26113-E567-V50-02 DPS-500XB A Server Power Supply. This unit is designed to provide stable and reliable power to compatible server systems. Please read this manual thoroughly before installation and use.

spésifikasi

The following table details the technical specifications of the Fujitsu S26113-E567-V50-02 DPS-500XB A Power Supply:

Setup sareng Instalasi

Proper installation is crucial for the safe and efficient operation of your power supply. Always ensure the server system is powered off and disconnected from the main power source before beginning installation.

1. Kasalametan munggaran: Disconnect all power cables from the server and ensure no residual power remains. Wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.
2. Cabut PSU Lama (upami aya): Carefully disconnect all cables from the existing power supply unit (PSU). Unscrew and remove the old PSU from the server chassis.
3. Pasang PSU Anyar: Gently slide the Fujitsu DPS-500XB A power supply into the designated PSU bay in your server chassis. Ensure it is seated correctly and align the screw holes.
4. PSU anu aman: Use the appropriate screws to firmly secure the power supply to the server chassis.
5. Sambungkeun Kabel Daya:
   • Connect the main ATX power connector to the motherboard.
   • Sambungkeun konektor daya CPU 4-pin kana motherboard.
   • Connect any necessary peripheral power cables (SATA, Molex, PCIe, etc.) to your drives, expansion cards, and other components. Ensure all connections are firm and correctly oriented.
6. Manajemén Kabel: Route cables neatly to improve airflow and prevent interference with other components.
7. Cék ahir: Double-check all connections to ensure they are secure and correctly installed.
8. Daya Hurung: Connect the server's power cord to the PSU and then to a grounded electrical outlet. Power on the server.

Parentah Operasi

Once installed, the power supply operates automatically to deliver power to your server components. No specific user interaction is typically required during normal operation.

• Hurungkeun/Pareuman: The power supply is controlled by the server's power button and operating system. Ensure the server is properly shut down before disconnecting power.
• Ventilasi: Ensure the server chassis has adequate ventilation to allow proper airflow for the power supply's cooling fan. Blocked vents can lead to overheating and component failure.
• Sumber Daya Stabil: Connect the server to a stable and grounded power outlet. Using a surge protector or Uninterruptible Power Supply (UPS) is recommended to protect against power fluctuations.

Pangropéa

Regular, simple maintenance can extend the lifespan of your power supply and ensure optimal performance.

• Ngaleungitkeun lebu: Periodically clean dust from the power supply's fan and ventilation grilles using compressed air. Ensure the server is powered off and unplugged before cleaning.
• Pariksa Kabel: Occasionally check power cables for any signs of wear, fraying, or damage. Replace damaged cables immediately.
• Kaayaan Lingkungan: Operate the server in a clean, dry, and well-ventilated environment within recommended temperature ranges to prevent overheating.

Pamérésan masalah

Upami anjeun mendakan masalah sareng catu daya anjeun, tingali léngkah-léngkah ngungkulan umum ieu:

• Henteu aya kakuatan:
  • Ensure the power cord is securely plugged into both the PSU and the wall outlet.
  • Pariksa stop kontak témbok fungsina ku cara nyolok kana alat sejen.
  • Check all internal power connections (motherboard, CPU, peripherals) are firmly seated.
• Instabilitas Sistem/Pareuman Acak:
  • This could indicate an overloaded or failing PSU. Ensure your system's power requirements do not exceed the PSU's 500W capacity.
  • Check for overheating. Ensure proper ventilation and clean any dust from the PSU fan.
• Bising kipas:
  • Excessive fan noise can be caused by dust accumulation. Clean the fan blades and grille.
  • If the noise persists, the fan bearing might be failing, which could require professional service or replacement.
• Bau ngaduruk:
  • Immediately power off and unplug the server. Do not attempt to use it. This indicates a serious electrical fault and requires professional inspection.

Tip pamaké

• Given this is a second-hand unit, it's advisable to perform a thorough visual inspection for any physical damage or signs of wear before installation.
• Always ensure compatibility with your server's motherboard and chassis form factor before attempting installation.
• When replacing a power supply, take note of the original cable routing to simplify the installation of the new unit.

Garansi sareng Rojongan

This product comes with a 3-month warranty period, effective from the date the package is delivered. The warranty covers manufacturing defects and operational failures under normal use.

• Pangecualian Garansi: The warranty is void if the product is damaged due to improper use, unauthorized modifications, or physical abuse.
• Bantosan Téknis: For technical assistance or warranty claims, please contact your vendor or the original manufacturer, Fujitsu Technology Solutions.
• Kawijakan mulang & ngabalikeun duit: For details regarding returns and refunds, please refer to the specific policy provided by your seller at the time of purchase.