Buku Panduan Pangguna Motherboard Desktop Gigabyte Seri H310M

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your Gigabyte H310M series desktop motherboard. The H310M series motherboards are designed to support 8th Generation Intel Core processors, offering a stable and reliable platform for your computing needs. Please read this manual thoroughly before installing or using your motherboard to ensure proper setup and to maximize its performance and longevity.

2. Setélan

2.1. Unpacking jeung Inspection

Carefully remove the motherboard from its packaging. Inspect the board for any signs of damage during transit. Ensure all components are present. It is recommended to handle the motherboard by its edges to avoid static discharge.

2.2. Instalasi komponén Leuwihview

Before installing the motherboard into a chassis, it is often easier to install the CPU, CPU cooler, and memory modules. Refer to the following steps and diagrams for guidance.

Figure 1: Gigabyte H310M D2P 2.0 Motherboard Layout

2.3. Pamasangan CPU

1. Tangtukeun lokasi stop kontak LGA1151 CPU dina motherboard nu.
2. Gently push down the load lever and pull it out to the side to open the CPU socket cover.
3. Align the notches on the CPU with the alignment keys on the socket. Carefully place the CPU into the socket without forcing it.
4. Close the socket cover and push the load lever back into place until it locks.
5. Pasang cooler CPU nurutkeun parentah produsén na.

Figure 2: CPU Socket, RAM Slots, and CMOS Battery Location

2.4. Pamasangan mémori (RAM).

1. Manggihan dua liang DIMM DDR4.
2. Buka klip dina kadua tungtung slot mémori.
3. Align the notch on the memory module with the key on the DIMM slot.
4. Selapkeun modul memori pageuh kana slot nepi ka jepitan snap kana tempat. Pastikeun duanana klip ditutup.

2.5. Pamasangan Motherboard kana Chassis

1. Pasang tameng I/O kana liang panel tukang chassis.
2. Align the motherboard with the standoffs in the chassis.
3. Ngamankeun motherboard kalawan screws.

2.6. Sambungan Kakuatan

• Sambungkeun konektor kakuatan utama 24-pin ATX tina catu daya anjeun ka motherboard nu.
• Sambungkeun 8-pin ATX 12V konektor kakuatan CPU ka motherboard nu.

2.7. Sambungan Alat Panyimpenan

Connect your SATA storage devices (HDDs/SSDs) to the SATA 6Gb/s connectors on the motherboard using SATA data cables. Ensure power cables from the PSU are also connected to the drives.

2.8. Sambungan Panel hareup

Connect the chassis's front panel cables (Power LED, HDD LED, Power Switch, Reset Switch, Front USB, Front Audio) to their respective headers on the motherboard. Refer to the motherboard diagram for exact locations.

Figure 3: Power, SATA, and Front Panel Headers

2.9. Pamasangan Kartu ékspansi

Insert graphics cards into the PCI Express x16 slot and other expansion cards (e.g., network cards, sound cards) into the PCI Express x1 slots. Secure them with the chassis's retention mechanism.

3. Parentah Operasi

3.1. Boot Mimiti sareng Setelan BIOS/UEFI

1. Saatos sadaya komponén dipasang sareng disambungkeun, hurungkeun sistem anjeun.
2. Press the designated key (usually DEL or F2) during startup to enter the BIOS/UEFI setup utility.
3. Configure basic settings such as boot order, date, and time. Save changes and exit.

3.2. Pamasangan Sistem Operasi

Insert your operating system installation media (USB drive or DVD) and follow the on-screen prompts to install the OS. Ensure the boot order is set correctly in BIOS/UEFI.

3.3. Pamasangan supir

After OS installation, install the necessary drivers for the motherboard chipset, integrated graphics (if applicable), LAN, and audio. These drivers are typically provided on a support CD/DVD or can be downloaded from the Gigabyte official websitus.

4. Pangropéa

4.1. beberesih

Rutin ngabersihan lebu tina motherboard sareng komponenana nganggo hawa anu dikomprés. Pastikeun sistem dipareuman sareng dicabut colokan sateuacan beberesih. Hindarkeun ngagunakeun cairan atanapi bahan abrasive.

4.2. BIOS / UEFI Apdet

BIOS/UEFI updates can improve system stability, add support for new hardware, or fix bugs. Download the latest BIOS/UEFI version from the official Gigabyte website for your specific motherboard model. Follow the update instructions carefully to avoid system damage.

4.3. Panggantian Batré CMOS

The CMOS battery (CR2032) powers the BIOS/UEFI settings and system clock. If your system frequently loses time or BIOS settings, the battery may need replacement. Power off the system, locate the battery, gently pry it out, and insert a new one with the positive side facing up.

5. Cara ngungkulan

5.1. Teu Aya Daya/Teu Aya Boot

• Pariksa sadaya sambungan kakuatan (24-pin ATX, 8-pin CPU).
• Pastikeun catu dayana tiasa dianggo.
• Pariksa sambungan saklar daya panel hareup.
• Coba booting kalawan komponén minimal (CPU, hiji RAM iteuk, GPU lamun euweuh grafik terpadu).

5.2. Taya Témbongkeun

• Ensure the monitor is connected to the correct video output (motherboard or discrete GPU).
• Pariksa lamun kartu grafik ieu leres seated na Powered.
• Uji nganggo monitor atanapi kabel anu béda.

5.3. Komponén Teu Dideteksi

• Reseat the component (RAM, GPU, storage drive).
• Check power and data cables for storage drives.
• Verify that the component is compatible with the motherboard.

5.4. Resetting BIOS/UEFI Settings

To clear CMOS settings, power off the system and unplug it. Locate the 'Clear CMOS' jumper (often labeled CLR_CMOS or similar) and short the pins for 5-10 seconds, or remove the CMOS battery for a few minutes and then reinsert it. This will revert BIOS settings to default.

6. Spésifikasi

Note: Specifications may vary slightly between specific H310M models (e.g., D2P, A, DS2, S2) particularly regarding rear I/O port configurations. Always refer to the specific model's product page for the most accurate details.

Figure 4: H310M D2P 2.0 Rear I/O Panel

Figure 5: H310M A 2.0 Motherboard with I/O Panel

Figure 6: H310M DS2 Motherboard with I/O Panel

7. Garansi jeung Rojongan

Gigabyte motherboards typically come with a manufacturer's warranty. Please refer to the official Gigabyte website or your purchase documentation for specific warranty terms and conditions. For technical support, driver downloads, and further product information, visit the official Gigabyte support page and search for your specific model.

8. Tips pamaké

• Pembaruan BIOS: If you encounter difficulty finding the official BIOS update page for your specific H310M model on the Gigabyte website, try searching for the broader 'H310M series' support page or contact Gigabyte customer support directly for assistance. Always ensure you download the correct BIOS version for your exact motherboard model.
• Kompatibilitas komponén: Sateuacan meuliasing new components like RAM or a CPU, always check the motherboard's Qualified Vendor List (QVL) and CPU support list on the Gigabyte websitus pikeun mastikeun kasaluyuan.
• Listrik statik: Always ground yourself before handling internal PC components to prevent damage from static electricity. Use an anti-static wrist strap if available.