1. Produk Langkungview
The Renolink V1.99 is a diagnostic and programming tool designed for Renault and Dacia vehicles. It allows users to perform various functions such as ECU programming, key coding, airbag resetting, and mileage correction directly through the OBD2 port.
Fitur konci:
- EPROM Read/Write
- ECU Resetting
- Clear Crash Airbag
- Airbag Reset & Virginize
- Programming konci
- TDB (Cluster) Programming
- Indicator Programming
- ECM Programming
- UCH Programming
- EPS Virginizer & Resetting
Vérsi software:
This manual covers Renolink V1.99. The software language is English.
2. Eusi Paket
- 1 x Renolink OBD2 Interface
- 1 x Software CD
3. Parentah Setup
- Pamasangan parangkat lunak:
- Insert the provided Software CD into your computer's CD/DVD drive.
- Follow the on-screen instructions to install the Renolink V1.99 software. Ensure all drivers are installed correctly.
- It is recommended to temporarily disable antivirus software during installation to prevent interference.
- Sambungan Hardware:
- Connect the USB end of the Renolink OBD2 interface cable to an available USB port on your computer.
- Locate the OBD2 diagnostic port in your vehicle (typically under the dashboard on the driver's side).
- Connect the OBD2 connector of the Renolink interface to the vehicle's OBD2 port.
- Initial Software Launch:
- Launch the Renolink V1.99 software from your computer's desktop or start menu.
- The software should detect the connected interface. If prompted, select the correct COM port.
4. Parentah Operasi
Before performing any operations, ensure your vehicle's ignition is ON (engine off) and the Renolink interface is securely connected to both your computer and the vehicle.
- Pilih Kendaraan:
- In the Renolink software, navigate to the vehicle selection menu.
- Choose the correct make (Renault or Dacia) and model of your vehicle.
- Perform Diagnostic Scan:
- Select the "Scan" option to identify connected ECUs and read fault codes.
- Review any diagnostic trouble codes (DTCs) displayed.
- Specific Programming Functions:
The Renolink V1.99 supports a wide range of programming functions. Always ensure you understand the implications of each operation before proceeding.
Figure 4: Renolink software interface with function selection Examples of Supported Operations:
- ECU Programming/Resetting: Access the ECU menu to perform resets or programming updates. This includes learning ECUs for Dacia Logan 2, Sandero, Lodgy, Docker, and Duster ph2.
- Pemrograman konci: Use the "KEY PROG" section for adding new keys or deleting existing ones. Supported models include Dacia Logan 2, Sandero 2, Duster ph 2, Lodgy, Dokker, and Renault Clio Symbol 3. Also supports UCH BMT Sagem key programming for Dacia Solenza, Supernova, Renault Twingo, Kangoo, and Master (1998-2003).
- Airbag Module Operations: Clear crash data, reset, or virginize airbag modules.
- Dashboard (TDB/Cluster) Operations: Read/write EPROM, flash, and correct mileage for various dashboards, including Dacia Logan2/Sandero2/Lodgy/Docker/Duster ph2 (2013-2017), Mégane 3 and Fluence 2015+, Laguna 3, Renault Fluence, Renault Modus, and Koleos.
- EPS (Electric Power Steering) Virginizer/Resetting: Virginize steering assist for Renault Megane 4, Scenic 4, Kadjar, and Talisman. Coding is automatic upon first ignition.
- PIN Code Reading: Read PIN code for HFM Renault Clio 4 and Captur 2016+. A valid card is required to teach HFM after virginizing.
- Nyimpen Data:
- Always save any read data (EPROM, flash, etc.) before performing write operations. This creates a backup in case of issues.
- Exiting Software:
- Close the Renolink software properly before disconnecting the interface from the vehicle or computer.
5. Pangropéa
- Tetep Bersih: Wipe the device and cable with a soft, dry cloth. Avoid using harsh chemicals or liquids.
- Panyimpenan anu leres: Store the Renolink interface and CD in a cool, dry place, away from direct sunlight and extreme temperatures.
- Apdet parangkat lunak: Periodically check for software updates from the official source (if available) to ensure compatibility with newer vehicle models and to access new features.
- Perawatan kabel: Ulah ngabengkokkeun atanapi muter kabel kaleuleuwihi pikeun nyegah karusakan internal.
6. Cara ngungkulan
- Alat Teu Dideteksi:
- Ensure the USB cable is securely connected to both the computer and the Renolink interface.
- Check Device Manager on your computer to see if the device is recognized and if there are any driver issues. Reinstall drivers from the CD if necessary.
- Coba port USB anu béda dina komputer anjeun.
- Kasalahan Komunikasi sareng Kandaraan:
- Verify that the OBD2 connector is firmly seated in the vehicle's diagnostic port.
- Ensure the vehicle's ignition is ON (engine off).
- Pariksa vol batré kendaraantage; low voltage can cause communication issues.
- Confirm that the correct vehicle model and ECU type are selected in the software.
- Software Freezes or Crashes:
- Pastikeun sistem operasi anjeun nyumponan sarat minimum pikeun parangkat lunakna.
- Close other unnecessary applications running in the background.
- Pasang deui parangkat lunak upami masalahna masih aya.
- Operasi Gagal:
- Always follow the software prompts carefully.
- Ensure the vehicle's battery is stable and fully charged before critical programming operations.
- If an operation fails, do not attempt it repeatedly without understanding the cause. Consult the software's help section or technical support.
7. Spésifikasi
| Atribut | Nilai |
|---|---|
| Modél | Renolink V1.99 |
| Vérsi Software | V1.99 |
| Software Basa | Inggris |
| Asalna | Daratan Cina |
| Tipe Maneuh | Hook |
| Paké | Jandéla |
| Kimia anu prihatin tinggi | Euweuh |
| Kira-kira. Beurat | 0.6 kg |
| Approx. Dimensions (LWH) | 1 cm x 1 cm x 1 cm (Note: These dimensions appear to be generic placeholder values.) |
8. Tips pamaké
- Always ensure your vehicle's battery is in good condition and fully charged before performing any programming operations to avoid interruptions.
- Read the software's on-screen instructions and warnings carefully before executing any function.
- For critical operations like key programming or ECU virginizing, it is advisable to have a stable power supply for both the vehicle and the computer.
- Keep your software updated to ensure compatibility and access to the latest features and vehicle databases.
9. Garansi jeung Rojongan
For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your original seller or the manufacturer's support channel. Keep your purchase receipt or order details handy when contacting support.
