1. Bubuka
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Deye Hybrid Single Phase Solar Inverter. These inverters are designed to provide adaptive PV and energy storage solutions for residential and commercial applications, supporting both on-grid and off-grid operations.
The Deye Hybrid Inverter series (SUN-5/6/7.6/8/10/12K-SG02LP2-US-AM2/AM3) offers a range of power outputs from 5kW to 12kW, featuring a colorful touch LCD, IP65 protection, and advanced functionalities for comprehensive energy management.
2. Émbaran Kasalametan
Please read and understand all safety instructions before installing, operating, or performing maintenance on the inverter. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.
- Installation must be performed by qualified personnel in accordance with local electrical codes and standards.
- Do not attempt to repair the inverter yourself. Refer all servicing to qualified service personnel.
- Ensure the inverter is disconnected from all power sources (PV, battery, grid, generator) before performing any maintenance or wiring.
- The inverter contains high voltage components. Do not open the cover unless specifically instructed to do so by the manufacturer.
- Wear appropriate personal protective equipment (PPE), including insulated gloves and safety glasses, during installation and maintenance.
- Jauhkeun barudak sareng jalmi anu teu sah tina inverter.
3. Eusi Paket
Upon receiving your Deye Hybrid Solar Inverter, please verify that all components are present and undamaged. The package typically includes:
- Deye Hybrid Single Phase Solar Inverter unit
- Pamasangan bracket jeung hardware
- Manual pangguna (dokumén ieu)
- Communication cables (e.g., WiFi module, RS485, CAN)
- Connectors for PV, battery, and AC connections
4. Setup jeung Instalasi
Proper installation is crucial for the inverter's performance and safety. It is highly recommended that installation be carried out by a certified electrician or solar professional.
4.1 Lokasi Pamasangan
- Choose a location that is well-ventilated and protected from direct sunlight.
- Ensure the mounting surface can support the inverter's weight (approx. 35.6kg).
- Maintain adequate clearance around the inverter for proper airflow and cooling.
- The inverter has an IP65 rating, allowing for outdoor installation, but protection from extreme weather conditions is still advisable.
4.2 Wiring Diagram and System Architecture
The Deye Hybrid Inverter supports various system configurations, including Off-Grid, On-Grid, and Hybrid setups. The following diagrams illustrate basic application scenarios. Consult with your system integrator for specific requirements and detailed wiring plans.
The inverter can power various appliances in home or office environments, including motor-type appliances like refrigerators and air conditioners.
4.3 Sambungan Listrik
- Input PV: Connect solar panel strings to the designated DC input terminals. Ensure correct polarity and voltage within the specified MPPT range (150-425V).
- Sambungan batré: Connect the battery bank (Lead-acid or Lithium-ion, 40-60V range) to the battery terminals. Ensure proper polarity.
- AC Output/Grid Connection: Connect the inverter's AC output to your home's electrical panel or the utility grid as per local regulations.
- Generator/Smart Load/Backup Load: Connect these as required for your specific system design.
- Komunikasi: Connect WiFi, RS485, or CAN communication modules for monitoring and control.
5. Parentah Operasi
The Deye Hybrid Inverter features a user-friendly interface for monitoring and control.
5.1 Mimiti Mimiti
- After all electrical connections are securely made and verified, switch on the DC isolator for the PV array.
- Switch on the battery breaker.
- Switch on the AC breaker for the grid connection and/or loads.
- The inverter will perform a self-test and then begin operation.
5.2 User Interface (Colorful Touch LCD)
The inverter is equipped with a colorful touch LCD for displaying real-time system status, energy flow, and configuration settings. Navigate through the menus using the touch screen or physical buttons (if present) to:
- Monitor PV production, battery state of charge, and grid interaction.
- View historical data and fault logs.
- Configure battery charging/discharging parameters, including up to 6 customizable time periods.
- Adjust operating modes (e.g., self-consumption, time-of-use, backup).
5.3 Operasi Paralel
For increased power output or redundancy, up to 16 Deye Hybrid Inverters can be operated in parallel. Refer to the detailed parallel connection guide in the full technical manual for specific wiring and configuration instructions.
6. Pangropéa
Regular maintenance ensures the longevity and optimal performance of your Deye Hybrid Inverter.
- beberesih: Periodically clean the inverter's exterior to remove dust and debris. Use a soft, dry cloth. Do not use liquid cleaners or solvents. Ensure ventilation openings are clear.
- Pamariksaan: Annually inspect all electrical connections for tightness and signs of corrosion. Check for any visible damage to cables or the inverter casing.
- Pembaruan firmware: Pariksa produsén urang website or contact support for available firmware updates to ensure optimal performance and access to new features.
- Kaayaan Lingkungan: Although rated IP65, ensure the inverter is not exposed to excessive moisture, extreme temperatures, or corrosive environments beyond its operating specifications.
7. Cara ngungkulan
If you encounter issues with your Deye Hybrid Inverter, refer to the following basic troubleshooting steps. For complex problems, contact qualified service personnel.
7.1 Isu umum jeung Solusi
- Taya Daya/Pareuman: Check all AC and DC breakers. Ensure PV input and battery connections are secure. Verify grid connection.
- Kaluaran Daya Lemah: Check PV array for shading or dirt. Verify PV voltage and current are within specifications. Ensure battery is adequately charged.
- Fault Codes on Display: Note down the specific fault code displayed on the LCD. Refer to the comprehensive fault code list in the full technical manual or contact Deye support with the code.
- Masalah Komunikasi: Ensure WiFi module is properly installed and configured. Check network connectivity. Verify RS485/CAN connections.
Always disconnect all power sources before inspecting internal components or wiring.
8. Spésifikasi
The following table provides key technical specifications for the Deye Hybrid Single Phase Solar Inverter series.
| Kategori | Parameter | Nilai |
|---|---|---|
| Data Umum | Ngaran Brand | Deye |
| Nomer modél | SUN-5/6/7.6/8/10/12K-SG02LP2-US-AM2/AM3 | |
| Ngaran produk | Inverter Surya | |
| Input Batré | Jenis Batré | Timbal-asam atanapi Litium-ion |
| Batré Voltage Rentang | 40-60V | |
| Max. Charging/Discharging Current | 250A | |
| Input String PV | Max. DC Input Voltage | 500V |
| Mimitian-up Voltage | 125V | |
| MPPT Voltage Rentang | 150-425V | |
| No tina MPP Trackers | 2 (for 5K/8K), 3 (for 10K/12K) | |
| No. of Strings per MPPT Tracker | 1+1 (5K), 2+2 (8K), 2+2+2 (10K/12K) | |
| Input / Kaluaran AC | Dipeunteun Input / Kaluaran Voltage / Rentang | 120/240V; 208V (0.88Un < U < 1.1Un) |
| Frékuénsi Kaluaran | 60Hz (55Hz-65Hz) | |
| Bentuk Sambungan Grid | 2L+N+PE | |
| Tipe Kaluaran | Fase Tunggal | |
| Efisiensi | Efisiensi MPPT | > 99% |
| Max. Efisiensi | 97.6% | |
| Fisik | Ukuran Kabinet (PxLxT) | 420 × 670 × 233 mm (Excluding Connectors and Brackets) |
| Beurat | 35.6 kg | |
| Jenis Cooling | Cooling Air calakan | |
| Lingkungan | Kisaran Suhu Operasi | -40 to +60°C (>45°C Derating) |
| Kalembaban Ambient Diidinan | 0-100% | |
| Protéksi Ingress (IP) Peunteun | IP65 (Type 3R) | |
| Geuning | <45 dB | |
| Sertifikasi & Standar | Sertifikasi | CE |
| Pangaturan grid | IEEE 1547.1, SRD V2.0 | |
| Safety/EMC Standard | FCC, UL 1741 | |
| Panganteur | Antarbeungeut Komunikasi | WIFI, RS485, CAN |
| Panyalindungan | Fitur panyalindungan terpadu | DC Polarity Reverse Connection Protection, AC Output Overcurrent Protection, AC Overvoltage Protection, AC Output Short Circuit Protection, DC Terminal Insulation Impedance Monitoring, DC Component Monitoring, Ground Fault Current Monitoring, Power Network Monitoring, Island Protection, Residual Current Fault Protection, DC Input Switch, Overvoltage, Grid Drop Protection, Residual Current (RCD) Protection, Surge Protection. |
Note: Specifications are subject to change without prior notice. Refer to the product datasheet for the most up-to-date information.
9. Tips pamaké
- Monitor rutin: Utilize the inverter's built-in monitoring features or connected communication modules (WiFi, GPRS) to regularly check system performance and identify any anomalies early.
- Optimalkeun Pamakéan Batré: Candak advantage of the 6 customizable time periods for battery charging and discharging to optimize energy usage based on electricity tariffs or personal consumption patterns.
- Jaga Ventilasi Bersih: Ensure that the inverter's cooling fins and ventilation openings are always free from obstructions to prevent overheating and maintain efficiency.
10. Garansi jeung Rojongan
10.1 Émbaran jaminan
The Deye Hybrid Single Phase Solar Inverter comes with a 5-year warranty. The specific terms and conditions of the warranty depend on the final installation location. Please retain your proof of purchase for warranty claims.
10.2 Rojongan Téknis
For technical assistance, warranty claims, or service inquiries, please contact your authorized Deye distributor or the manufacturer's support channels. Provide your inverter model number and serial number when contacting support to expedite assistance.
