1. Bubuka
The SmallRig 4903 Camera Cage Kit is designed to enhance handheld shooting capabilities and facilitate the attachment of various accessories for your Panasonic LUMIX S1R II camera. This kit includes a camera cage, an HDMI & USB-C cable clamp, and a top handle, providing a robust and versatile platform for professional videography and photography.
2. Naon dina Box
Carefully unpack your SmallRig 4903 Camera Cage Kit and ensure all components are present:
- Kandang × 1
- HDMI&USB-C Cable Clamp × 1
- Cecekelan Luhur × 1
- Parentah Operasi × 1
- Kartu Garansi × 1
3. Setup jeung Instalasi
3.1 Attaching the Camera Cage
- Persiapan: Before installing the cage, please remove any side lock adapters from your camera.
- Amankeun kaméra: The cage features a three-point locking system for extra stability. It locks the camera via one bottom 1/4"-20 screw and two side lock adapters. Rubber pads are integrated to prevent scratching your camera body.
3.2 Attaching the Top Handle
The ergonomically designed top handle connects to the cage via a NATO clamp, providing a comfortable and stable grip, especially for low-angle shots.
3.3 Attaching the HDMI & USB-C Cable Clamp
The thumbscrew-tightened cable clamp is designed to fix both HDMI and USB-C cables simultaneously, preventing accidental disconnections during shooting.
3.4 Catetan kasaluyuan
- The cage in this kit is compatible with LUMIX S5 II / S5 IIX / G9 II cameras.
- The HDMI & USB-C Cable Clamp is only compatible with LUMIX S1R II.
- The cage is compatible with Panasonic DMW-XLR1 / XLR2. However, the top handle included in this kit is not compatible with these XLR units. If you need to use DMW-XLR1 / XLR2, it is recommended to use the SmallRig Top Handle for Sony XLR-K1M / K2M / K3M and Panasonic DMW-XLR1 / XLR2 3082. Please remove the cable clamp on the bottom of the XLR before using the 3082.
4. Operating the Camera Cage Kit
4.1 Pasang Asesoris
The cage offers multiple mounting points for various accessories:
- 1/4"-20 Liang Ulir: Support accessories like the SmallRig Side Handle 3323.
- Dudukan Sepatu Tiis: Suitable for attaching an SSD Holder (e.g., BSH2343), microphone, LED video light, or monitor.
- ARRI 3/8"-16 Locating Holes: Designed for accessories such as the SmallRig Monitor Mount 2903B.
- HawkLock H21 NATO Rail: Located on the left side, compatible with accessories like the SmallRig Side Handle 4485.
- Strap Holes: Located on both sides, compatible with hand straps for added security.
4.2 Arca-Swiss Quick-Release Plate
The integrated Arca-Swiss quick-release plate allows for quick mounting and dismounting on:
- Arca-Swiss compatible tripods.
- DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro / RS 4 / RS 4 Pro gimbals.
4.3 Multiple Scenarios
The versatile design of the cage kit supports various shooting configurations, from handheld to tripod-mounted setups, accommodating monitors, microphones, and LED lights.
5. Pangropéa
To ensure the longevity and optimal performance of your SmallRig Camera Cage Kit, follow these maintenance guidelines:
- beberesih: Use a soft, dry cloth to wipe down the cage and accessories. For stubborn dirt, a slightly damp lawon bisa dipaké, dituturkeun ku drying langsung. Hindarkeun bahan kimia anu kasar atanapi bahan abrasive.
- Panyimpenan: Simpen kit ieu di tempat anu garing sareng bébas kekebul nalika henteu dianggo.
- Pamariksaan: Periodically check all screws and connections for tightness. The kit includes a magnetic wrench for easy disassembly and assembly, which can be used for tightening.
6. Cara ngungkulan
If you encounter any issues with your SmallRig Camera Cage Kit, please refer to the following common solutions:
- Sambungan Leupas: If any part of the cage or accessories feels loose, use the included magnetic wrench to tighten the screws.
- Accessory Mounting Issues: Ensure that accessories are compatible with the specific mounting points (e.g., 1/4"-20, ARRI 3/8"-16, cold shoe, NATO rail).
- Camera Fit Issues: Double-check that you have removed any side lock adapters from your camera before installing the cage, as instructed in Section 3.1.
- Kabel Clamp Not Securing Cables: Ensure the HDMI and USB-C cables are properly seated within the clamp and the thumbscrew is tightened securely.
For persistent issues, please contact SmallRig customer support.
7. Spésifikasi
| Atribut | Nilai |
|---|---|
| Dimensi produk | 168.8 × 185.0 × 141.8 mm |
| Beurat produk | 356.0 ± 5.0g |
| Ukuran Paket | 180.0 × 138.0 × 67.0 mm |
| Beurat pakét | 459.0 ± 5.0g |
| Bahan (s) | Aluminium Alloy, Stainless Steel, Silicone |
| Kasaluyuan | Panasonic LUMIX S1R II (full kit), LUMIX S5 II / S5 IIX / G9 II (cage only) |
| Nomer modél | 4903 |
| Jenis Kandang | Kit Kandang |
8. Tips pamaké
- Always ensure side lock adapters are removed from your camera before installing the cage to prevent damage and ensure a proper fit.
- When using Panasonic DMW-XLR1 / XLR2, remember that the included top handle is not compatible. Consider the recommended SmallRig Top Handle 3082 and remove any cable clamps on the XLR unit before use.
- Utilize the magnetic wrench provided for quick and secure assembly and disassembly of components.
- Experiment with different accessory mounting points to find the optimal setup for your specific shooting needs.
9. Garansi jeung Rojongan
Your SmallRig 4903 Camera Cage Kit comes with a standard manufacturer's warranty. Please refer to the included Guarantee Card for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact SmallRig customer service through their official channels.
