Motorcycle LCD Digital Speedometer Instruction Manual

1. Produk Langkungview

This manual provides detailed instructions for the installation, operation, and maintenance of your MAIMEIMI 1088 Motorcycle LCD Digital Speedometer. Designed specifically for the Honda Navi 110, this high-quality digital dashboard offers clear and comprehensive data display for an enhanced riding experience.

Figure 1: MAIMEIMI 1088 Motorcycle LCD Digital Speedometer

2. Eusi Paket

Mangga parios bungkusanna kalayan saksama pikeun mastikeun sadaya barang aya sareng henteu ruksak.

• 1 x Motorcycle LCD Digital Speedometer (Model 1088)

3. Instalasi jeung Setup

Before installation, ensure your motorcycle's ignition is off and the battery is disconnected to prevent electrical damage.

3.1 Diagram Wiring

Refer to the following diagram for correct wiring connections. Improper wiring can lead to malfunction or damage.

Figure 2: Wiring Diagram and Technical Parameters

3.2 Instalasi fisik

The speedometer is designed for direct replacement on the Honda Navi 110. Secure the unit using existing mounting points. Ensure all connections are firm and waterproofed where necessary.

Gambar 3: Tukangeun view of the speedometer with wiring harness

4. Parentah Operasi

The digital speedometer provides clear and real-time information about your motorcycle's performance.

4.1 Fungsi tampilan

The LCD display supports the following data:

• Speed (in KMH)
• Suluh Gauge
• Voltage
• Odometer (ODO)
• Trip Meter (TRIP)
• Jam
• Engine Lights
• N Gear Indicator
• Lampu Tanda Bélok Kénca
• Tanda Bélok Katuhu
• High Beam Indikator
• Oil Level Indication

Figure 4: Labeled Display Elements

4.2 Odometer jeung Trip Méter

• Total Mileage (ODO): Displays the total distance traveled by the motorcycle. When the unit is turned on, it will display the total mileage.
• Trip Mileage (TRIP): After 15 seconds of displaying total mileage, the unit automatically switches to the trip mileage display.
• Reset perjalanan: The subtotal trip mileage is automatically reset every time the ignition is turned off.

4.3 Adaptive Brightness

The speedometer is equipped with a photosensitive sensor that automatically adjusts the display brightness. This ensures clear visibility during the day and prevents dazzling at night, optimizing readability in various lighting conditions.

Figure 5: Adaptive Brightness Adjustment

5. Pangropéa

The MAIMEIMI 1088 speedometer is designed for durability and minimal maintenance.

• beberesih: Ngagunakeun lemes, damp cloth to clean the display and housing. Avoid abrasive cleaners or solvents that could damage the plastic.
• Tahan cai: The unit features a rainstorm-level rainproof design, meaning it can withstand exposure to rain and even temporary immersion without issues.
• Perumahan: Constructed from high-strength ABS material with a carbon fiber texture, the housing is anti-seismic, wear-resisting, and corrosion-resistant, providing long-lasting protection.

Figure 6: Rainstorm Level Rainproof Feature

Figure 7: High Strength ABS Housing with Carbon Fiber Texture

6. Cara ngungkulan

If you encounter any issues with your speedometer, please check the following:

• Henteu aya tampilan: Ensure all wiring connections (Positive, Negative) are secure and correctly connected according to the wiring diagram. Check the motorcycle's battery for sufficient charge.
• Bacaan anu salah: Verify that the speed sensor and fuel sensors are properly connected and functioning.
• Fungsi intermittent: Pariksa sambungan leupas atawa kabel ruksak.

If the problem persists after checking these points, please contact customer support for further assistance.

7. Spésifikasi

8. Tips pamaké

Taya tips pamaké husus éta sadia ti ulang customerviews atanapi Q&A pikeun produk ieu.

9. Garansi jeung Rojongan

Pikeun patalékan, dukungan téknis, atanapi klaim garansi, mangga ngahubungi penjual atanapi produsén langsung. Simpen resi pameseran anjeun salaku bukti pameseran.