1. Bubuka
This manual provides essential information for the safe and efficient operation of your Vevor SIHAO 50W CO2 Mini Laser Cutting Engraving Machine. This versatile machine is designed for precision engraving and cutting of various non-metallic materials such as wood, acrylic, cloth, leather, paper, plastic, plywood, and rubber. Please read this manual thoroughly before operating the machine to ensure proper setup, usage, and maintenance.
2. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| Ngaran produk | C02 Laser Engraving Cutting Machine |
| Ngaran Brand | Vevor |
| Jenis laser | Gas CO2 |
| Daya laser | 50W |
| Tabung Laser | Sealed CO2 Glass Tube |
| Jam Hirup Tabung Laser | 1000-1300 Jam |
| Area Ukiran | 12 x 8 inci (300 x 200 mm) |
| Ukuran Barang Maks pikeun Diukir | 10.25W x 8.75L x 2.85H inches (260 x 220 x 70 mm) |
| Laju ukiran | 0-13.8 in./s (0-350 mm/s) |
| Laju motong | 0-1.38 in./s (0-35 mm/s) |
| Minimum Shaping Character | 0.04 x 0.04 inci (1 x 1 mm) |
| Rasio Resolusi | 0.001 inches (0.026 mm) / (1000 dpi) |
| Resetting Positioning | ≤0.0004 inches (0.01 mm) |
| Bahan lumaku | Acrylic, Glass, Leather, Paper, Plastic, Plywood, Rubber, Wood (Non-metal materials) |
| Modeu tiis | Water Cooling (Water Pump included) |
| Tipe Motor | Stepper Motor |
| Interface to Computer | Port USB |
| Software Dirojong | CorelDraw (NewlyDraw and NewSeal functions) |
| Graphic Format Supported | BMP, JPG, JPEG, WMF, EMF, PLT |
| Sasayogian tanaga | 110V/60Hz (USA, Canada, Japan) or 220V~250V (other countries) |
| Konsumsi Daya | ≤250W |
| Suhu Operasi | 32-113°F (0-45°C) |
| Ukuran (L * W * H) | 800 x 500 x 250 mm |
| Beurat | 40 KG |
| Sertifikasi | CE Certified |
3. Eusi Paket
Upon receiving your Vevor SIHAO Laser Engraving Machine, please verify that all the following items are included:
- 1 x CO2 LASER Engraver Unit
- 1 x Water Pump (for cooling)
- 1 x Smoke Pipe (for exhaust)
- 1 x Smoke Fan (for exhaust)
- 1 x Kawat Listrik
- 1 x Kabel USB
- 1 x USB Key (likely for software license or security dongle)
- 1 x Accessory Bag (containing various small parts)
- 1 x Instruction Video (digital or physical media)
- 1 x Manual Pamaké Inggris
4. Setélan
Turutan léngkah-léngkah ieu pikeun nyetél mesin ukiran laser anjeun:
4.1 Ngabongkar sareng Nempatkeun
- Carefully remove the machine and all accessories from the packaging. The machine weighs approximately 40 KG, so ensure you have assistance if needed.
- Place the machine on a stable, level surface in a well-ventilated area. Ensure there is sufficient space around the machine for operation, maintenance, and exhaust.
- Verify that the power supply matches the machine's requirements (110V/60Hz or 220V~250V).
4.2 Connecting Water Cooling System
The water cooling system is crucial for the longevity of the CO2 laser tube.
- Connect the provided water pump to the inlet and outlet ports of the laser tube. Ensure a secure connection to prevent leaks.
- Place the water pump in a bucket or reservoir filled with distilled water. The water level should be sufficient to fully submerge the pump.
- Ensure the water circulates freely through the laser tube.
4.3 Connecting Smoke Exhaust System
Proper ventilation is essential to remove fumes and debris generated during engraving and cutting.
- Attach the smoke pipe to the exhaust port on the machine.
- Connect the smoke fan to the other end of the smoke pipe.
- Direct the smoke pipe to an outdoor vent or a suitable filtration system.
4.4 Electrical and USB Connections
- Connect the power wire to the machine and then to a grounded electrical outlet.
- Connect the USB cable from the machine to your computer.
4.5 Pamasangan parangkat lunak
- Install the provided CorelDraw software on your computer. This software includes both NewlySeal and NewlyDraw functions for carving and cutting.
- Follow the on-screen instructions for installation and activate using the provided USB Key if required.
5. Parentah Operasi
Operating the laser engraver involves several key steps to ensure safety and achieve desired results.
5.1 Pancegahan Kasalametan
- Perlindungan panon: Never look directly at the laser beam. Always use appropriate laser safety glasses.
- Ventilasi: Ensure the smoke exhaust system is fully operational during use to remove hazardous fumes.
- Kasalametan seuneu: Keep a fire extinguisher nearby. Some materials can ignite during laser processing.
- pangawasan: Never leave the machine unattended while operating.
- Stopan Darurat: Familiarize yourself with the emergency stop button on the control panel.
5.2 Nyiapkeun Operasi
- Daya Hurung: Hurungkeun switch kakuatan utama mesin.
- Cooling Cai: Ensure the water pump is running and water is circulating through the laser tube.
- Kipas Angin: Turn on the smoke fan.
- Penempatan Bahan: Open the machine lid and carefully place your material on the work bed. Ensure it is flat and within the maximum engraving area of 12x8 inches (300x200mm) and maximum height of 2.85 inches (70mm).
- Penyesuaian fokus: Adjust the laser focus according to your material thickness. Refer to the detailed instructions in the CorelDraw software manual for precise focusing.
5.3 Software and Job Setup
- Open CorelDraw: Launch the CorelDraw software on your computer.
- Desain / Impor: Create your design or import a graphic file (BMP, JPG, JPEG, WMF, EMF, PLT).
- Setélan Parameter: Set the engraving or cutting parameters (laser power, speed) based on your material type and desired outcome. Refer to the software manual for recommended settings for various materials.
- Posisi: Use the software to position your design on the virtual work area, corresponding to the material placement on the machine bed.
- Kirim ka Mesin: Once settings are finalized, send the job to the laser engraver via the USB connection.
5.4 Mimitian Operasi
- After sending the job, press the 'Start' button on the machine's control panel.
- Monitor the engraving/cutting process closely.
- In case of any emergency or malfunction, immediately press the red 'Emergency Stop' button.
6. Pangropéa
Regular maintenance ensures optimal performance and extends the lifespan of your laser engraver.
6.1 Pangropéa poean
- Wewengkon Kerja Bersih: After each use, clean the work bed and surrounding areas to remove debris and dust.
- Check Water Cooling: Ensure the water level in the reservoir is adequate and the water is clean. Replace water if it appears cloudy or dirty.
6.2 Pangropéa Mingguan / Bulanan
- Clean Optical Components: Carefully clean the focal lens and reflection mirrors using lens cleaning solution and specialized wipes. Avoid touching them with bare hands.
- Inspect Laser Tube: Visually inspect the CO2 laser tube for any signs of damage or degradation. The expected life is 1000-1300 hours.
- Lubricate Bagian Pindah: Apply a small amount of lubricant to the guide rails and stepper motor components as per the detailed instructions in the full user manual.
- Sistim knalpot: Clean the smoke pipe and fan to ensure efficient fume extraction.
6.3 Recommended Spare Parts/Consumables
Keep the following spare parts on hand for replacement as needed:
- Tabung Laser
- Lensa Focal
- Reflection Lens
7. Cara ngungkulan
If you encounter issues with your laser engraver, refer to the following common problems and solutions:
7.1 Laser Not Firing or Weak Output
- Pariksa kakuatan: Ensure the machine is powered on and the laser switch is engaged.
- Cooling Cai: Verify that the water pump is running and water is circulating. Overheating can prevent the laser from firing.
- Kahirupan Tabung Laser: If the laser tube has exceeded its estimated lifespan (1000-1300 hours), it may need replacement.
- Optical Path: Inspect the focal lens and mirrors for dirt or misalignment. Clean or adjust as necessary.
- Setélan parangkat lunak: Confirm that laser power settings in CorelDraw are correctly configured and not set too low.
7.2 Poor Engraving/Cutting Quality
- fokus: Re-check and adjust the laser focus for the material thickness.
- Setélan Bahan: Adjust engraving speed and laser power settings in CorelDraw. Different materials require different parameters.
- Optik Bersih: Dirty lenses or mirrors can scatter the laser beam, leading to poor quality. Clean them thoroughly.
- Material Flatness: Ensure the material is perfectly flat on the work bed. Uneven surfaces will result in inconsistent focus.
7.3 Machine Not Responding to Computer
- Sambungan USB: Ensure the USB cable is securely connected to both the machine and the computer. Try a different USB port or cable.
- Parangkat lunak: Restart CorelDraw and your computer. Reinstall the software if necessary.
- Supir: Verify that the correct USB drivers for the laser engraver are installed on your computer.
- Konci USB: Ensure the USB key (if applicable) is properly inserted and recognized.
8. Tips pamaké
Maximize your laser engraving experience with these helpful tips:
- Setélan tés: Always perform small test engravings on scrap material before starting a large project. This helps in fine-tuning power and speed settings for optimal results on specific materials.
- Ventilasi mangrupikeun konci: Even with the smoke fan, ensure your workspace is well-ventilated. Fumes from certain materials can be harmful.
- Tetep beresih: A clean machine is a happy machine. Regularly cleaning the lens, mirrors, and work area prevents dust and debris from affecting laser performance and engraving quality.
- Kualitas cai: Use distilled water for the cooling system to prevent mineral buildup in the laser tube, which can reduce its efficiency and lifespan.
- Software Mastery: Take time to learn the full capabilities of the CorelDraw software. Understanding its features will unlock more creative possibilities and improve workflow.
9. Garansi jeung Rojongan
Your Vevor SIHAO 50W CO2 Mini Laser Cutting Engraving Machine comes with the following warranty and support:
- Garansi Mesin: 2 taun
- Core Components Warranty: 1 taun
- Layanan saatos penjualan: Online support is provided for any technical assistance or queries you may have.
For support, please refer to the contact information provided with your purchase documentation or visit the official Vevor websitus.
