1. Produk Langkungview
The Firecore rotary laser level is designed for precise leveling tasks on both indoor and outdoor construction sites. It features self-leveling capabilities, multiple rotation speeds, and can be operated with a remote control and receiver for extended working distances. The FRL300G model supports both horizontal and vertical plane construction, while the FRL300R model is designed for horizontal planes only.
Figure 1: FIRECORE Rotary Laser Level FRL300R/FRL300G with accessories.
Video 1: Demonstration of the FIRECORE Rotary Laser Level in a construction environment.
2. Eusi Paket
Upon opening the carrying case, ensure all components are present and undamaged:
- FIRECORE Rotary Laser Level (FRL300R or FRL300G)
- Hard-shell Carrying Case
- Rechargeable Lithium-ion Battery (7.4V / 2,600mAh)
- Kabel Ngecas USB Tipe-C
- Adaptor kakuatan
- Kadali jauh
- Panarima laser
- Panarima Clamp
- Laser Enhancing Glasses (color may vary)
- Manual pamaké
Figure 2: Complete kit contents of the FIRECORE Rotary Laser Level.
3. Setélan
3.1 Pamasangan Batré sareng Ngecas
- Panggihan kompartemen batréna di handapeun tingkat laser.
- Insert the 7.4V / 2,600mAh Lithium-ion battery, ensuring correct polarity.
- Tutup kompartemen batré anu aman.
- To charge, connect the USB Type-C charging cable to the device and a power source using the provided adapter. The charging time is approximately 3.5 hours.
Figure 3: Battery and charging details for the laser level.
3.2 Pasang Alat
The laser level features a standard 5/8-inch threaded hole at its base for mounting onto a geodetic tripod. Ensure the tripod is stable and placed on a flat surface for optimal performance.
Figure 4: Tripod features for stable mounting.
Figure 5: Tripod dimensions and adjustability.
4. Parentah Operasi
4.1 Power On/Off and Automatic Leveling
- Place the laser level on a stable surface or tripod.
- Pencét tombol daya pikeun ngaktipkeun alat.
- The device will automatically self-level within an alignment range of ±5°. This process takes approximately 15 seconds. Ensure the device is placed on a relatively flat surface for successful automatic leveling.
Figure 6: Automatic leveling mode in operation.
4.2 Rotation Speeds and Scan/Slope Mode
The device offers multiple rotation speeds (0, 300, 600 revolutions per minute) and features scan and slope modes for various applications. Use the control panel buttons or the remote control to adjust these settings.
Figure 7: FRL300R red laser in action, highlighting control panel.
Figure 8: FRL300G green laser in action, highlighting control panel.
4.3 Pulse Mode and Receiver Usage
For outdoor use or when working over long distances, activate the pulse mode and use the laser receiver. The working range with the receiver can extend up to 600 meters in diameter.
Figure 9: Using pulse mode with a receiver for extended range.
4.4 Operasi kadali jauh
The included remote control allows for convenient adjustment of settings from a distance, making construction tasks more efficient.
angka 10: kadali jauh pikeun operasi merenah.
4.5 Vertical and Horizontal Plane Construction (FRL300G only)
The FRL300G model is capable of projecting both horizontal and vertical laser planes. The FRL300R model is limited to horizontal planes.
Figure 11: FRL300G constructing a vertical plane.
Figure 12: FRL300R constructing a horizontal plane.
5. Pangropéa
5.1 Beberesih sareng Panyimpenan
- Jaga alat tetep beresih sareng bebas tina lebu sareng lebu. Anggo kaén anu lemes sareng garing pikeun beberesih.
- Store the laser level and its accessories in the provided hard-shell carrying case when not in use to protect it from impacts and environmental factors.
- Hindarkeun ngalaan alat ka suhu anu ekstrim atanapi sinar panonpoé langsung kanggo waktos anu berkepanjangan.
5.2 Perlindungan IP55
The FIRECORE Rotary Laser Level has an IP55 rating, meaning it is protected against dust ingress and low-pressure water jets from any direction. While it offers good protection, it is not designed for submersion in water.
Figure 13: IP55 rating for dust and water resistance.
6. Cara ngungkulan
- Alat teu hurung: Ensure the battery is fully charged and correctly installed. Check the power adapter and charging cable if charging issues are suspected.
- Laser beam is not stable or flashing: The device may be outside its self-leveling range (±5°). Reposition the device on a flatter surface or adjust the tripod.
- Reduced working distance: Ensure pulse mode is activated and the laser receiver is being used correctly. Environmental factors like bright sunlight can also affect range.
- Kadali jauh teu ngabales: Check the remote control's battery. Ensure there are no obstructions between the remote and the laser level.
7. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| Modél | FRL300R / FRL300G |
| Peunteun Protection IP | IP55 |
| Panjang gelombang laser | 635-650nm (Red) / 505-520nm (Green) |
| Kelas laser | Class 2 (IEC/EN60825-1/2014) <1mW |
| Alignment Range | ± 5° (approx. 15 seconds) |
| Laju Rotasi | 0, 300, 600 rpm |
| Dengdekkeun adjustment Range | ± 5° |
| Sudut Scanning | 0°, 10°, 45°, 90°, 180° |
| Horizontal / Vertikal Akurasi | ± 3 mm / 30 m |
| Operating Range (Radius) | 30 m / 60 m |
| Rentang Gawé sareng Receiver (Diaméter) | 600 m |
| Sasayogian tanaga | 7.4V / 2,600mAh Lithium-ion battery |
| Waktu Ngecas | Kira-kira. 3.5 jam |
| Waktos Gawé Terus-terusan | FRL300G: approx. 20 hours; FRL300R: approx. 28 hours |
| Carjer batré | USB 5V / 1A |
| Pamasangan Thread | 5/8" |
| Suhu Operasi | -10 ℃ nepi ka 50 ℃ |
| Suhu Panyimpenan | -20 ℃ nepi ka 50 ℃ |
| Ukuran | 39.00*33.00*24.00cm |
| Éléktronik | Sumuhun |
| Sertifikasi | CE, FCC, RoHS, WEEE |
8. Tips pamaké
- Receiver Readings: When using the laser receiver, pay attention to whether it indicates precise level or if it provides a measurement of inequality (e.g., in centimeters or millimeters) to help you adjust the height of your measuring rod accurately. Some receivers offer both visual and audible cues for precise leveling.
- Kahirupan batré: To maximize battery life, especially in colder conditions, ensure the battery is fully charged before use. The Lithium-ion battery is designed for efficient operation at subzero temperatures.
- Visibilitas: For better visibility of the laser beam in bright conditions or over long distances, always use the provided laser enhancing glasses and the laser receiver.
9. Garansi jeung Rojongan
For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or visit the official Firecore websitus. Simpen resi pameseran anjeun salaku bukti pameseran.
