SKMEI 2409/2410 Digital Sports Watch User Manual

Bubuka

Thank you for choosing the SKMEI 2409/2410 Digital Sports Watch. This manual provides detailed instructions for setting up, operating, and maintaining your watch. Please read it carefully to ensure proper use and to enjoy all the features of your new timepiece.

The SKMEI 2409 and 2410 models are versatile digital wristwatches designed for both men and women, featuring a clear LED display, chronograph, complete calendar, alarm, week display, countdown timer, and dual time functions. With 5ATM water resistance, it is suitable for daily use and various outdoor activities.

Produk Leuwihview

Biasakeun diri sareng komponén jam tangan sareng fungsi tombol.

Fungsi Tombol:

• Tombol LIGHT (Kénca luhur): Aktipkeun lampu tukang LED.
• Tombol MODE (Kénca handap): Ngaliwatan sababaraha modeu (Waktos, Kronograf, Alarm, Hitung Mundur, Waktos Ganda).
• Tombol START/STOP (Katuhu luhur): Starts/stops functions in Chronograph and Countdown modes; adjusts settings in setting mode.
• Tombol RESET (Katuhu handap): Resets functions in Chronograph and Countdown modes; adjusts settings in setting mode.

Setup sareng Konfigurasi Awal

Sateuacan nganggo jam tangan anjeun, anjeun panginten kedah nyetel waktos, tanggal, sareng karesep anu sanésna.

1. Nyetel Waktos sareng Tanggal

1. Tina modeu Time Display, pencét tombol MODÉ tombol sababaraha kali nepi ka detik mimiti kedip-kedip. Ieu nunjukkeun anjeun dina modeu setelan.
2. Pencét éta RESET tombol pikeun siklus ngaliwatan setélan: Detik → Jam → Menit → Taun → Bulan → Poé.
3. Ngagunakeun éta Mimitian / STOP button to adjust the flashing value. Hold down the Mimitian / STOP button to change values faster.
4. Sakali sadaya setelan leres, pencét tombol MODÉ tombol pikeun kaluar ti modeu setelan sareng uih deui ka Tampilan Waktos.

2. Nyetél Format 12/24 Jam

While in Time Setting mode (seconds flashing), press the Mimitian / STOP button when the hour is flashing to toggle between 12-hour (indicated by 'PM' for afternoon hours) and 24-hour formats.

3. Nyetél Alarm

1. Tina modeu Time Display, pencét tombol MODÉ button until "ALM" (Alarm) appears and the alarm hour starts flashing.
2. Pencét éta RESET button to switch between setting the alarm hour and minutes.
3. Ngagunakeun éta Mimitian / STOP tombol pikeun nyaluyukeun nilai kedip-kedip.
4. Pencét éta MODÉ tombol pikeun ngonfirmasi tur kaluar tina modeu setelan alarem.
5. Pikeun ngahurungkeun/mareuman alarm: Dina modeu Alarm, pencét tombol Mimitian / STOP button to toggle the alarm icon (bell symbol) on or off. When the alarm is active, the bell icon will be displayed.

4. Setting the Countdown Timer

1. Tina modeu Time Display, pencét tombol MODÉ button until "COUNTDOWN" appears and the countdown hour starts flashing.
2. Pencét éta RESET button to switch between setting the countdown hour, minutes, and seconds.
3. Ngagunakeun éta Mimitian / STOP tombol pikeun nyaluyukeun nilai kedip-kedip.
4. Pencét éta MODÉ button to confirm and exit the countdown setting mode.
5. To start/stop the countdown: In Countdown mode, press the Mimitian / STOP kancing.
6. To reset the countdown: While the countdown is stopped, press the RESET kancing.

5. Setting Dual Time (2TIME)

1. Tina modeu Time Display, pencét tombol MODÉ button until "2TIME" appears and the dual time hour starts flashing.
2. Pencét éta RESET button to switch between setting the dual time hour and minutes.
3. Ngagunakeun éta Mimitian / STOP tombol pikeun nyaluyukeun nilai kedip-kedip.
4. Pencét éta MODÉ button to confirm and exit the dual time setting mode.

Parentah Operasi

1. Témbongkeun Waktos Dasar

The watch displays the current time, day of the week, and date. In 12-hour format, 'PM' indicates afternoon hours.

2. Using the LED Backlight

Pencét éta CAHAYA button (top left) to illuminate the display for a few seconds. This is useful in low-light conditions.

3. Ngagunakeun Chronograph (Stopwatch)

1. Tina modeu Time Display, pencét tombol MODÉ button until "CHRONO" or "STW" (Stopwatch) appears. The display will show "00:00:00".
2. Pencét éta Mimitian / STOP tombol pikeun ngamimitian stopwatch nu.
3. Pencét éta Mimitian / STOP tombol deui pikeun ngareureuhkeun stopwatch.
4. Pencét éta RESET tombol pikeun ngareset stopwatch ka "00:00:00".
5. To record split times: While the stopwatch is running, press the RESET tombol pikeun nembongkeun waktu pamisah. Stopwatch terus jalan di latar tukang. Pencét RESET deui pikeun mulang ka tampilan stopwatch ngajalankeun.

4. Ngagunakeun Alarm

When the alarm is set and active, it will sound at the designated time for approximately 20 seconds. Press any button to stop the alarm sound.

5. Ngagunakeun Timer mundur

Once started, the countdown timer will count down from the set time to zero. An alert will sound when the countdown reaches zero.

Pangropéa sareng Perawatan

Proper care will extend the life and functionality of your SKMEI watch.

1. Tahan Cai (5ATM)

• Your watch is rated for 5ATM (50 meters) water resistance. This means it is suitable for daily use, such as hand washing, rain, and short periods of swimming.
• Entong pencét sagala tombol bari arloji ieu submerged dina cai.
• Entong use the watch in hot water, saunas, or steam rooms, as this can compromise the water seals.
• Avoid exposing the watch to strong water jets or high-pressure water.

2. beberesih

• Lap wadah sareng tali jam tangan sacara rutin nganggo lawon anu lemes sareng garing.
• Pikeun kokotor nekad, make rada damp cloth and mild soap, then wipe dry immediately.
• Hindarkeun nganggo pembersih kimiawi, pangleyur, atanapi bahan abrasive, sabab ieu tiasa ngarusak finish arloji.

3. Ngagantian batré

• Jamna nganggo batré CR2025.
• When the display becomes dim or functions become erratic, it's time to replace the battery.
• Battery replacement should ideally be performed by a qualified watch technician to ensure the water resistance seal is properly maintained.
• If replacing yourself, carefully open the back cover, replace the battery with a new CR2025, and ensure the gasket is correctly seated before closing the cover tightly.

4. Panyimpenan

• Simpen arloji anjeun dina tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
• Avoid exposing the watch to strong magnetic fields, which can affect its accuracy.

Pamérésan masalah

Upami anjeun ngalaman masalah sareng jam tangan anjeun, tingal masalah sareng solusi umum ieu:

spésifikasi

Detailed specifications for the SKMEI 2409 (Large) and 2410 (Small) models.

Model 2409 (Large)

Model 2410 (Small)

Tip pamaké

• Rasa tombol: The buttons may require a firm press, especially when new. Ensure a distinct click or tactile feedback when operating.
• Panginget tahan cai: Always remember not to press buttons while the watch is wet or submerged to maintain its water resistance.
• Kajelasan tampilan: The LED display is designed for clear visibility. If it appears dim, check the battery.
• Mode Ngabuburit: When setting, if you accidentally pass the desired setting, simply continue pressing the MODE button to cycle back through the options.

Garansi sareng Rojongan

Pikeun masalah naon waé anu henteu katutupan dina manual ieu, atanapi pikeun patarosan garansi, mangga ngahubungi penjual atanapi produsén langsung. Simpen resi pameseran anjeun salaku bukti pameseran.

SKMEI is committed to providing quality products. If you experience any manufacturing defects, please reach out to customer service for assistance.