Miboxer 2.4G RF Wireless Remote Controller Instruction Manual

1. Bubuka

This manual provides detailed instructions for the Miboxer series of 2.4G RF Wireless Remote Controllers, including models C1, C2, C3, C4, C5, and C6. These controllers are designed to manage various MiBoxer/Mi-Light 2.4G series lighting products, offering features such as brightness adjustment, color temperature control, RGB+CCT functionality, and SPI pixel control. Please read this manual carefully before use to ensure proper operation and longevity of your device.

2. Produk Langkungview

The Miboxer remote controller series offers a range of functionalities tailored for different lighting control needs. All models utilize 2.4G RF wireless transmission technology, providing a stable signal and strong anti-interference capabilities with a control distance of up to 30 meters. Each remote features a strong magnetic base for convenient storage.

Fitur spésifik modél:

• C1 Warna Suhu Jauh: Controls color temperature and brightness.
• C2 Remote (For V3.0 Smart Plug & Switch): Supports ON/OFF functionality only (not dimmable).
• C3 Warna Suhu Jauh: Controls color temperature and brightness.
• C4 RGB+CCT Remote (2.4GHz): Adjusts brightness, color temperature, and saturation for RGB+CCT lighting.
• C5 4-Zona RGB + CCT Jauh: Offers 16 million colors, and adjustable brightness, color temperature, and saturation across 4 zones.
• C6 SPI Remote (2.4GHz): Designed for SPI strip lights, allowing color alignment, pixel length adjustment (mini 8pt, max 2048pt), dynamic mode selection, speed control, and scene saving.

3. Spésifikasi

4. Setélan

4.1. Pamasangan

The remote controllers feature a strong magnetic base for easy attachment to metallic surfaces. For wall mounting, use the provided magnetic holder:

1. Remove the protective sticker from the back of the magnetic holder.
2. Stick the holder firmly onto a clean, dry wall surface.
3. Place the remote controller onto the magnetic holder.

4.2. Linking and Unlinking with Lighting Products

Before using the remote, it must be linked to your MiBoxer/Mi-Light 2.4G series lighting product. Ensure the lighting product is powered off before starting the linking process.

Linking Procedure:

1. Pareuman kakuatan kana lampu salami 10 detik, teras hurungkeun deui.
2. Within 3 seconds of turning on the light, short press the "ON" button on the remote 3 times.
3. If successful, the light will flash 3 times slowly.

Attention: If linking fails (light does not flash), please repeat the above steps. A remote cannot be linked again if it has already been successfully linked to a light.

Unlinking Procedure:

1. Pareuman kakuatan kana lampu salami 10 detik, teras hurungkeun deui.
2. Within 3 seconds of turning on the light, short press the "ON" button on the remote 5 times.
3. If successful, the light will flash 10 times quickly.

Attention: If unlinking fails (light does not flash), please repeat the above steps. There is no need to unlink if the light has never been linked.

5. Parentah Operasi

5.1. C1 Warna Suhu Jauh

• HIRUP / OFF: Turn all linked lights ON or OFF.
• Bodas langkung haneut / bodas langkung tiis: Saluyukeun suhu warna.
• Caang +/-: Increase or decrease the brightness.
• S1 (Scene): Select pre-programmed scenes.
• Zone 1-4 ON / OFF: Turn individual zones ON or OFF.

5.2. C2 Remote (For V3.0 Smart Plug & Switch)

• HIRUP / OFF: Turn all linked smart plugs/switches ON or OFF.
• Timer (0.5h, 1h, 2h, 4h, 8h): Set a timer for automatic power off.
• Zone 1-4 ON / OFF: Turn individual zones ON or OFF.

5.3. C3 Warna Suhu Jauh

• HIRUP / OFF: Turn the light ON or OFF.
• Brightness / CCT Control Slider: Slide up and down to adjust brightness or color temperature.
• Robah CCT: Short press the ON button to turn on the light, then short press again while the light is on to change the CCT (Color Correlated Temperature).

5.4. C4 RGB+CCT Remote

• HIRUP / OFF: Turn the light ON or OFF.
• Brightness / CCT / RGB Slider: Slide up and down to adjust brightness, CCT, or RGB color.
• Lampu Indikator: Red (Brightness Mode), Yellow (CCT Mode), Green (RGB Mode).
• Dimming Mode Cycle: Short press the ON button to turn on the light. Continuous short presses will cycle through dimming modes: Brightness → CCT → RGB.

Note: If no operation is performed for 3 seconds, the remote automatically returns to Brightness Mode.

5.5. C5 4-Zona RGB + CCT Jauh

• Warna Cincin: Touch the color ring to select RGB colors.
• Kacaangan Dimming slaider: Slide to adjust brightness.
• Lampu Bodas (W): Switch to white light mode.
• Master ON / OFF: Turn all linked lights ON or OFF.
• S-/O (Speed-/CCT-/Saturation+): Decrease speed in dynamic mode, decrease CCT in white mode, increase saturation in RGB mode.
• M (mode): Change dynamic modes.
• S+/O (Speed+/CCT+/Saturation-): Increase speed in dynamic mode, increase CCT in white mode, decrease saturation in RGB mode.
• Zone 1-4 ON / OFF: Turn individual zones ON or OFF.

5.6. C6 SPI Remote

• RGB Slider: Adjust RGB color.
• Pixel Number Slider: Adjust the number of pixels (length) for SPI strips.
• Speed Slider: Atur kecepatan modeu dinamis.
• Geser kacaangan: Saluyukeun kacaangan.
• RGBW: Switch to RGBW mode.
• HIRUP / OFF: Turn the light ON or OFF.
• Ngalih: Short press to change the color of the dynamic mode. Long press to change the direction of the dynamic mode.
• M (Dynamic Mode): Select dynamic modes.
• S1 (Scene): Save or recall scenes.

5.6.1. Setting Length (Pixel Number)

To set the pixel number (length) for SPI strips (mini 8pt, max 2048pt):

1. Long press "ON" for 5 seconds until the white color lights up and the last point is blinking.
2. Slide the pixel number slider to change the length.
3. Short press to add one pixel point (pt), long press to add pt continuously.
4. Pencét sakeudeung "ON/OFF" pikeun kaluar saatos setélan réngsé.

5.6.2. Setting Width for Dynamic Mode

Slide the pixel number slider to change the pixel number and get different lengths for dynamic modes with various sections.

5.6.3. Setting Time and Color for ON/OFF

Short press "OFF" 5 times to enter into running ON/OFF settings:

• Geser "Speed" pikeun nyetel waktos ON/OFF.
• Geser "RGB" pikeun nyetel warna ON/OFF.

Pencét sakeudeung "ON/OFF" pikeun kaluar saatos setélan réngsé.

6. Pangropéa

6.1. Kaperawatan Umum

• Do not use the remote controller in high humidity or high-temperature environments.
• If the remote is not used frequently, remove the battery to prevent leakage and store it in a dry, static-electricity-free area.
• Avoid using the remote near large metal objects or strong magnetic fields, as this can affect the signal and reduce the control distance.
• Bersihkeun remot nganggo lawon anu lemes sareng garing. Entong nganggo bahan kimia anu keras atanapi pembersih anu kasar.

7. Cara ngungkulan

• Jauh teu ngabales: Check if the battery is inserted correctly and has sufficient power. Replace the battery if necessary.
• Light not linking/unlinking: Ensure the power cycle (10 seconds off, then on) is performed correctly and the "ON" button presses are within 3 seconds. Repeat the linking/unlinking steps carefully.
• Reduced control distance or intermittent signal: Ensure there are no large metal objects or strong magnetic fields between the remote and the receiver. Replace the battery if the signal strength is consistently weak.
• C4 remote automatically returns to Brightness Mode: This is normal behavior. If no operation is performed for 3 seconds, the C4 remote will default back to Brightness Mode.

8. Tips pamaké

• For optimal performance, ensure a clear line of sight or minimal obstructions between the remote and the lighting product.
• When controlling multiple zones, take a moment to familiarize yourself with which zone button corresponds to which lighting area for seamless control.
• Consider keeping a spare battery on hand to avoid interruptions in control.

9. Garansi jeung Rojongan

Kanggo inpormasi garansi, dukungan téknis, atanapi patarosan layanan, mangga ngahubungi pangecér asli anjeun atanapi produsén sacara langsung. Simpen resi pameseran anjeun salaku bukti pameseran.