1. Bubuka
Mukadimah
Thank you for choosing this Intelligent Car Information System. Our product adds CarPlay and Android Auto to vehicles lacking these features, letting you use them for music, navigation, and more—all via your car's original screen. A seamless upgrade, it bridges your smartphone and in-car display, bringing familiar interfaces without altering your vehicle's factory setup. Easy to integrate, it enhances connectivity safely, turning your existing infotainment system into a smart, intuitive hub. Modernize your drive affordably, leveraging what your car already has.
Precautions Kasalametan
- Install only by qualified professionals to avoid damaging vehicle electrical systems.
- Disconnect car battery before installation to prevent short circuits.
- Ensure all connections are secure and insulated to avoid fire hazards.
- Do not block airbags, driver visibility, or vehicle controls during installation.
- Avoid modifying essential vehicle safety systems or wiring.
- Operate connected devices only when parked; never distract from driving.
- Regularly check for loose connections or overheating during use.
- Stop using immediately if unusual smells, sounds, or malfunctions occur.
- Ensure product usage complies with local traffic laws and regulations.
- Keep product away from water, extreme temperatures, and direct sunlight when not in use.
2. Fungsi Bubuka
Apple CarPlay
CarPlay lets iPhone users connect to car systems, mirroring key apps. Access navigation, music, calls, and messages via the car's screen or voice commands. It enables hands-free operation, syncing contacts and playlists, enhancing driving safety and convenience seamlessly.
Android Auto
Android Auto connects Android phones to car displays, bringing essential apps safely. Access navigation, music, calls, and messages via voice or touch. It prioritizes driving-focused features, enabling hands-free use to keep focus on the road, enhancing convenience and safety.
Hareup / pungkur / 360 Input
modul calakan ngarojong decoding video tur bisa dilengkepan hareup view, tukangeun view (with intelligent dynamic trajectory display and radar support), as well as a 360° panoramic view.
Image: Icons representing features like Bluetooth, CarPlay, Android Auto, Factory Protocol, Lossless Installation, Voice Control, Live Map, and Online Entertainment.
3. Applicable System and Car Models
This module is compatible with specific Volvo models and years. Please verify your car's model, year, and screen size against the tables below.
For Volvo with 7-inch Screen (2015-2020)
| Modél Mobil | Mangtaun-taun | Ukuran layar |
|---|---|---|
| V40 | 2015-2020 | 7" |
| V60 | 2015-2019 | |
| S60/S60L | 2015-2019 | |
| XC60 | 2015-2017 | |
| S80L | 2015-2017 |
Image: Table showing supported Volvo models (V40, V60, S60/S60L, XC60, S80L) with corresponding years and 7-inch screen size. Also illustrates correct and incorrect car console types for compatibility.
For Volvo with 9-inch Screen (2017-2022)
| Modél Mobil | Mangtaun-taun | Ukuran layar |
|---|---|---|
| XC40 | 2017-2022 | 9" |
| XC60 | 2017-2022 | |
| XC90 | 2017-2022 | |
| S60 | 2020-2022 | |
| S90 | 2017-2022 | |
| V60 | 2020-2022 | |
| V90 | 2017-2022 |
Image: Table showing supported Volvo models (XC40, XC60, XC90, S60, S90, V60, V90) with corresponding years and 9-inch screen size.
4. Pamasangan
Diagram Wiring
The following diagram illustrates the connections required for installing the module. Ensure all connections are secure.
Image: Wiring diagram showing connections for the ANYFAR module, including Factory Power Harness, Factory LVDS Harness, and Original car fiber optic cable.
DIP Settings & Switch
Adjust the DIP switches according to your car model and screen size. After switching, restart the decoder for changes to take effect.
| Modél Mobil | Taun | Ukuran layar | Setélan DIP |
|---|---|---|---|
| V40 | 2015-2020 | 7" | 245 67 ON |
| V60 | 2015-2019 | 7" | 25 DINA |
| S60/S60L | 2015-2019 | 7" | 25 DINA |
| XC60 | 2015-2017 | 7" | 25 DINA |
| S80L | 2015-2017 | 7" | 25 67 ON |
Note: Please ensure the dial is set to "ON" as indicated. Restart the decoder after making changes.
5. Operasi
Tombol Control
The module integrates with your car's existing controls for seamless operation.
Tombol setir
| Tombol | Operasi | Fungsi |
|---|---|---|
| Lagu Saméméhna / Salajengna | Pencét lila | Switch OEM screen to interface screen OR Interface screen to the OEM screen |
| Lagu Saméméhna / Salajengna | Pencét pondok | Lagu saméméhna/Salajengna |
| Volume Up | Pencét pondok | Ningkatkeun polumeu |
| Volume Turun | Pencét pondok | Ngurangan polumeu |
Image: Illustration of steering wheel buttons and their functions for voice awakening and volume control.
Panel Control Tengah
| Tombol | Operasi | Fungsi |
|---|---|---|
| Kenop Rotary | Swipe/Click | Fungsi kontrol |
| Tombol Hazard | Double Click Short press | Switch OEM screen to interface screen OR Interface screen to the OEM screen |
Image: Diagram showing how to switch between OEM car system and CarPlay/Android Auto by long-pressing a button on the central control panel.
Sambungan nirkabel
The module uses wireless CarPlay and Android Auto, supporting audio and video separation. Before using, pair your device via Bluetooth and ensure the vehicle's audio system is set to Bluetooth music mode.
Lengkah Sambungan CarPlay Wireless
- Turn on your phone's Bluetooth and Wi-Fi, and keep them on.
- Select the Bluetooth Device name as “CAR Audio_XXXX” on your phone.
- A pairing request will pop up. Confirm pairing and then select to use CarPlay.
Image: Steps for Bluetooth Audio Output: 1. Pair Car Bluetooth, 2. Connect CarPlay, 3. Sound Output (showing iPhone settings).
Image: Car screen displaying Wireless CarPlay interface with navigation and music apps.
Pilihan Sumber Audio
On your iPhone, check that the sound source is set to the original car radio (e.g., 'Volvo' or 'CAR BT').
Nirkabel Android Auto
Go to the Bluetooth settings of the Smart Box. Plug once, sync all, both wired and wireless. Navigate, Play, reply, Voice commands, never take eyes off the Road.
Image: Car screen displaying Wireless Android Auto interface with music and map apps.
Image: Car screens demonstrating intelligent voice control with Siri and Google Assistant.
6. External Settings
Tukangeun View Input kaméra
This CarPlay interface supports camera input for clear rearview imagery. Connect the camera as shown in the guide.
Image: Car screen displaying an aftermarket rear view camera feed with parking lines.
Wiring for the rear camera:
Image: Diagram showing the wiring connections for a rear view camera to the module.
Radar and Trajectory Settings
To enable reversing trajectory lines and aftermarket radar, adjust settings in the MCU Setup:
- Enter system settings: Click "Factory mode" > "Advanced mode".
- Enter password "888888".
- Go to "MCU setup" and uncheck the "A0" option.
- Return to the previous level and click "Restart system" to enable the reversing rear view fungsi.
- If your aftermarket camera supports reversing trajectory lines, uncheck the A1 box to display them.
- For aftermarket radar, uncheck the A2 box.
- If connecting a front camera, choose the "A3" option.
Image: Screenshots of the MCU Setup interface, showing options for A0, A1, A2, and A3 related to camera and radar functions.
7. Spésifikasi
| Fitur | Spésifikasi | Fitur | Spésifikasi |
|---|---|---|---|
| Operasi Voltage | 9-16V, 14.4V (rated) | Suhu Panyimpenan | -30~+85°C |
| Suhu Operasi | -30~+75°C | Kalembaban Ambient | ≤98% (at 45°C), 65±5% (rated) |
| Power Consumption Current | 1A (rated), 3A (Max) | Pareum Ayeuna | 300mA (Clock is on) |
| Arus Tenang | kirang ti 3mA | ||
| Ngecas Ayeuna | ≤2A; when the USB charging current >1A, the host machine should activate the circuit protect function to control the current within 15A and avoid product burning. | ||
8. Cara ngungkulan
8.1 Why will the Box's Bluetooth disconnect?
The working principle of wireless CarPlay involves Bluetooth pairing for device information confirmation, followed by a Wi-Fi connection for data transmission. To avoid interference, the Bluetooth connection will then disconnect. This is a normal phenomenon.
8.2 I cannot connect CarPlay, but Bluetooth is already paired.
Please forget the device's Bluetooth connection and reset Wi-Fi on your iPhone (Settings > General > Transfer or Reset [Device] > Reset > Reset Network Settings).
8.3 Why is the wireless CarPlay not stable?
- Ensure that the mounted position of the CarPlay box is not blocked by metal components, as this may impair Wi-Fi signal transmission.
- Switch the Wi-Fi channel: Enter the CarPlay box settings > Factory Mode > Connectivity Settings > Hotspot Band > Select 1, 6, or 11, depending on your current region.
9. Tips pamaké
- Fungsi Layar Toél: The module utilizes your car's existing display and controls. Touch control is supported if your vehicle's original screen is touch-enabled. This module does not add touch screen functionality to non-touch displays.
- Verify Car Model Year: Always double-check your exact car model and year against the compatibility tables provided in this manual to ensure proper function. For example, while some XC60 models are supported, a 2014 XC60 may not be compatible as the listed range starts from 2015.
- Wiring Included: All necessary wiring for a plug-and-play, non-destructive installation is included with the module.
10. Garansi jeung Rojongan
Garansi
This product comes with a 365-day warranty, ensuring quality and reliability.
Image: Icons indicating Quality Assurance, 24 Hour Shipping, 365 Day Warranty, 100% Authentic, 1v1 Engineer Services, and Professional Team.
Bantosan Téknis
For any technical issues or further assistance, please contact our support team at: techsupport@anyfar.com.
Anjeun ogé tiasa ngarujuk kana manual pangguna resmi PDF kanggo inpormasi anu langkung lengkep: View Manual Pamaké (PDF)
