GEYA Din Rail Digital Voltmeter Instruction Manual

1. Bubuka

Thank you for choosing the GEYA Din Rail Digital Voltmeter. This device is designed for accurate voltage measurement in electrical systems, available in single-phase (GV-1P) and three-phase (GV-3P) configurations. It features a clear LED display for easy reading of AC voltage. This manual provides essential information for safe installation, operation, and maintenance of your voltmeter.

Figure 1: GEYA GV-1P (left) and GV-3P (right) Din Rail Digital Voltmeters

2. Émbaran Kasalametan

Mangga baca sareng pahami sadaya pitunjuk kaamanan sateuacan masang atanapi ngoperasikeun alat ieu. Upami henteu nuturkeun pitunjuk ieu tiasa nyababkeun sengatan listrik, kahuruan, atanapi tatu parah.

• Pamasangan sareng pangropéa ngan kedah dilakukeun ku tanaga anu mumpuni.
• Ensure the power supply is disconnected before any installation or wiring.
• Do not use this product in environments with high frequency conversion, inverters, or significant harmonic interference, as this may affect accuracy and device longevity.
• Pariksa yén voltage range of the device matches your application's requirements.
• Do not expose the device to moisture or extreme temperatures outside its specified operating range.

3. Fitur Produk

• Compact Din Rail mounting design.
• Clear LED digital display for easy voltage bacaan.
• Available in single-phase (GV-1P) and three-phase (GV-3P) models.
• Lega voltage measurement range: 80-500VAC.
• High accuracy with a discrepancy range of ±2%.
• Gancang sampling rate of 1 time/second.
• Low input loop power consumption (≤2VA).
• Certified with CE for quality and safety.

Figure 2: GEYA Din Rail Meters for various electrical parameters

4. Spésifikasi Téknis

Figure 3: Technical Parameters Overview

5. Diménsi Produk

The GEYA Din Rail Digital Voltmeter is designed for standard Din Rail mounting. Refer to the diagrams below for detailed dimensions.

Figure 4: Dimensional Drawing (All dimensions in mm)

• rubak: 18mm
• Jangkungna: 88.5mm
• Depth (top): 66mm
• Depth (bottom): 49.5mm
• Mounting Hole Distance: 35mm

6. Instalasi jeung Wiring

Before installation, ensure the main power supply is OFF. This device is designed for Din Rail mounting.

6.1. Pamasangan

1. Attach the voltmeter to a standard 35mm Din Rail by clipping it into place.
2. Pastikeun éta dipasang pageuh sareng henteu oyag.

6.2. Diagram Kabel

Refer to the diagram below for correct wiring. Incorrect wiring can damage the device or lead to hazardous conditions.

Figure 5: Wiring Diagram for GV-1P (left) and GV-3P (right)

• GV-1P (Single Phase Voltmeter): Sambungkeun input voltage to terminals 1 and 2. The display will show 'V~'.
• GV-3P (Three Phase Voltmeter): Connect phase 1 to terminals 1 and 2 (V1~), phase 2 to terminals 3 and 4 (V2~), and phase 3 to terminals 5 and 6 (V3~). The display will show 'V1~', 'V2~', and 'V3~' sequentially.

Important Note: This product is not suitable for use with frequency converters, inverters, or in power environments with high harmonic interference. Such conditions may lead to inaccurate readings or damage to the device.

7. Operasi

Once properly installed and wired, restore power to the circuit. The voltmeter will automatically power on and display the measured AC voltage(s) on its LED screen. For the GV-3P model, the display will cycle through the voltages of each phase (V1, V2, V3).

• Maca Tampilan: The bright red LED display provides clear numerical readings of the voltage.
• Akurasi: The device provides readings with a ±2% discrepancy range.

8. Pangropéa

The GEYA Digital Voltmeter requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• beberesih: Anggo kaén anu lemes sareng garing pikeun ngabersihan alat. Ulah make cleaners abrasive atawa pangleyur.
• Pamariksaan: Pariksa sambungan kabel sacara berkala pikeun mastikeun éta aman sareng bébas tina korosi.
• Lingkungan: Pastikeun lingkungan operasi tetep dina kisaran suhu sareng kalembaban anu ditangtukeun.
• Pareum listrik: Always disconnect power before performing any cleaning or inspection.

9. Cara ngungkulan

10. Tips pamaké

• For optimal performance, install the voltmeter in a clean, dry environment away from direct heat sources or excessive vibration.
• Always double-check your wiring against the provided diagram to prevent damage and ensure accurate readings.
• If using the three-phase model (GV-3P), ensure each phase is connected to its designated terminals for correct sequential display.

11. Garansi jeung Rojongan

GEYA products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or visit the official GEYA websitus. Mangga sayogikeun modél produk sareng tanggal pameseran anjeun nalika ngahubungi dukungan.

12. About GEYA

GEYA Electric, established in 2007, is a private-owned enterprise specializing in the research, manufacture, and sales of low voltage electrical and automatic controlling products. The company is located in Wenzhou City and is committed to top quality and constant innovation. GEYA products are certified to required industry standards, including CE, CB, SAA, SEMKO, TUV, and RoHS.

GEYA Product Range Includes:

• Circuit Breakers (MCB, MCCB, ELCB)
• Kontaktor
• Inverters
• Solar Energy Systems
• Relays (Time, Monitoring, Modular)
• PLCs
• Timer
• Saklar otomatis
• Kotak Distribusi
• Lightings
• Other related accessories and components