1. Bubuka
The WUBEN AT2X Bicycle Mount is designed to securely attach your compatible WUBEN flashlight (X4, X1, X2 Pro) to your bicycle handlebars, providing reliable lighting for your cycling adventures. This manual provides instructions for proper installation, operation, and maintenance of your bicycle mount.
2. Eusi Paket
- 1x WUBEN AT2X Bicycle Mount/Clip
- (Flashlight not included)
3. Spésifikasi
| Fitur | Rincian |
|---|---|
| Ngaran modél | AT2X |
| Nomer modél | WUBEN ATX2 |
| Bahan | palastik |
| Jinis barang | Flashlight Mount Holder |
| Compatible Flashlights | WUBEN X4, WUBEN X1, WUBEN X2 Pro |
| Ukuran Paket (approx.) | Panjangna: 5 cm, Lebar: 5 cm, Jangkungna: 5 cm |
| Beurat Paket (approx.) | 0.05 kg |
| Asalna | Daratan Cina |
4. Parentah Setup
Follow these steps to properly install the WUBEN AT2X Bicycle Mount and attach your flashlight:
- Nyiapkeun Gunung: Loosen the knob on the side of the mount to open the clamp.
- Pasangkeun kana Stang: Posisi cl kabukaamp around your bicycle handlebar. Ensure the rubberized grips are properly seated to prevent slipping. Tighten the knob firmly until the mount is secure and does not rotate freely.
- Attach Flashlight: Align your compatible WUBEN flashlight (X4, X1, or X2 Pro) with the mounting rail on the top of the bicycle mount. Slide the flashlight onto the rail until it clicks into place. Ensure it is fully engaged and secure.
- Pariksa Kaamanan: Gently tug on the flashlight to confirm it is firmly attached to the mount and the mount is stable on the handlebar before riding.
5. Parentah Operasi
Once the WUBEN AT2X Bicycle Mount is securely installed with your flashlight, the mount itself requires no further operation. The flashlight's functions (on/off, mode changes) are controlled directly on the flashlight unit as per its own instruction manual. The mount provides a stable platform for your flashlight during cycling.
6. Pangropéa
- beberesih: Ngusap gunung ku lemes, damp lawon pikeun miceun kokotor jeung lebu. Ulah make bahan kimia kasar atawa cleaners abrasive.
- Pamariksaan: Periodically check the mount for any signs of wear, cracks, or damage. Ensure the knob and screw mechanism operate smoothly and securely.
- Keketatan: Before each ride, verify that the mount is still tightly secured to the handlebar and that the flashlight is firmly attached to the mount. Re-tighten if necessary.
7. Cara ngungkulan
- Dudukan dina stang leupas: Ensure the knob is fully tightened. If the handlebar diameter is too small, consider adding a rubber shim (not included) for a tighter fit.
- Flashlight is loose on mount: Ensure the flashlight is correctly aligned and fully slid into the mounting rail until it clicks. Check for any obstructions in the rail.
- Mount does not fit flashlight: This mount is specifically designed for WUBEN X4, X1, and X2 Pro flashlights. It may not be compatible with other flashlight models.
8. Tips pamaké
- Pariksa kasaluyuan: Always confirm that your flashlight model is one of the specified compatible WUBEN models (X4, X1, X2 Pro) to ensure a secure fit.
- Posisi optimal: Experiment with different positions on your handlebar to find the best angle for your flashlight's beam, ensuring maximum visibility and safety.
- Cék biasa: Vibrations from cycling can sometimes loosen mounts. Make it a habit to quickly check the tightness of both the handlebar clamp and the flashlight attachment before each ride.
9. Garansi jeung Rojongan
For any issues, questions, or warranty claims regarding your WUBEN AT2X Bicycle Mount, please contact the retailer or manufacturer directly. Keep your proof of purchase for warranty purposes.
