Buku Panduan Mesin Ukiran Laser LASER TREE K1 MAX 60W

1. Produk Langkungview

The LASER TREE K1 MAX is a high-power diode laser engraving and cutting machine designed for DIY enthusiasts and small businesses. It features an adjustable 60W laser module, offering versatile power options for various materials and applications. The machine boasts an exceptionally large working area of 800x600mm and a maximum engraving speed of 20000mm/min, enabling efficient and precise work.

Fitur konci:

• High Power Laser Module: Built-in 12pcs 5.5W beam compressed laser diodes, delivering 60W+ optical power.
• Kakuatan anu tiasa disaluyukeun: Easily switch between 20W, 40W, and 60W for engraving and cutting tasks.
• Wewengkon Gawé ageung: 800x600mm workspace for extensive projects.
• Kagancangan Ukiran Luhur: Up to 20000mm/min for rapid processing.
• Accurate Focus: Ensures precise and clean results.
• Bantuan Udara: Improves cutting performance and surface cleanliness.
• Cable Drag Chain: Manages cables for a tidy and safe workspace.
• TF Card Offline Engraving: Allows operation without a continuous computer connection.
• Red Cross Line Locating: Aids in precise material positioning.
• Machine Tilt Detection and Protection: Enhances safety by alarming if the machine is tilted during operation.

Demonstrasi produk:

Video: Comparison of K1 MAX 60W engraving and cutting capabilities against a 40W laser engraver.

2. Émbaran Kasalametan

WARNING: This is a Class 4 laser product. Direct exposure to the laser beam can cause severe eye and skin damage. Always wear appropriate laser safety goggles when operating the machine.

• Perlindungan panon: Always wear certified laser safety goggles that block the laser's wavelength (450nm) when the laser is active.
• Ventilasi: Operate the machine in a well-ventilated area or use an exhaust system to remove fumes and smoke generated during engraving/cutting.
• Bahaya seuneu: Laser cutting can ignite flammable materials. Never leave the machine unattended during operation. Keep a fire extinguisher nearby.
• Kasalametan Bahan: Only engrave or cut materials that are safe for laser processing. Avoid materials that produce toxic fumes or can catch fire easily.
• Stabilitas Mesin: Ensure the machine is placed on a stable, level surface. The built-in tilt detection system will alert you if the machine is moved or tilted during operation.
• Barudak jeung Pets: Jauhkeun barudak jeung piaraan ti wewengkon operasi.
• Stopan Darurat: Familiarize diri jeung lokasi sarta fungsi tombol eureun darurat.

3. Eusi Paket

The LASER TREE K1 MAX 60W package includes the following components:

Gambar: Detil view of all components included in the LT-K1 Max 60W package.

• Rakitan Sumbu-X x1
• Rakitan Sumbu-Y x2
• Pigura Hareup x1
• Pigura Tukang x1
• Pelat Pangiket Katrol Sumbu-X x1
• Suku Pangrojong x3
• Kotak Kontrol Utama x1
• Sabuk Pangaturan Sumbu-Y x2
• Kabel Utama x1
• Adaptor kakuatan x1
• Kabel AC x1
• Pamaca Kartu x1
• Kartu TF x1
• USB Kabel x1
• Laser Module x1 (60W)
• Lénsa Pelindung Laser Cadangan x2
• Pompa Pitulung Udara x1
• Panel Sarang Lebah x1
• Pelat Protéksi Desktop x1
• Sekrup Pangatur M4*30 x2
• Mur-T x4
• Sekrup Pangiket M4 * 5 x 4
• Sekrup Buleud M4 * 18 x 1
• Sekrup Buleud M5 * 10 x 1
• Sekrup Buleud M5 * 20 x 16
• Sekrup Datar M5 * 20 x1
• Selongsong Kolom Pangwates x1
• Pakét Bahan x1
• Buku Panduan Pangguna Pompa Udara x1
• Buku Panduan Pangguna K1 Max x1
• Pad Pasagi x4
• Kunci L-Allen x4 (2mm, 2.5mm, 3mm, 4mm)
• 8-10 Kunci Pas Buka x1
• Kabel Ties x1
• Sikat beberesih x1

4. Spésifikasi

Cutting Performance (Power: 100%):

Image: Cutting depth capabilities for 20W, 40W, and 60W laser modules on materials like plywood, pine wood, MDF, and acrylic.

• 20W Module: Can cut 12mm Plywood (160mm/min), 15mm Pine Wood (460mm/min), 5mm MDF (15mm/min), 15mm Acrylic (15mm/min).
• 40W Module: Can cut 15mm Plywood (200mm/min), 20mm Pine Wood (130mm/min), 9mm MDF (150mm/min), 20mm Acrylic (30mm/min).
• 60W Module: Can cut 20mm Plywood (170mm/min), 40mm Pine Wood (50mm/min), 9mm MDF (400mm/min), 30mm Acrylic (30mm/min).

5. Setup Guide

Follow these steps to assemble and set up your LASER TREE K1 MAX laser engraver:

1. Ngabongkar komponén: Carefully remove all items from the packaging and verify against the packing list.
2. Kumpulkeun pigura: Connect the X-Axis Assembly, Y-Axis Assemblies, Front Frame, and Rear Frame according to the included K1 Max User Manual. Ensure all screws (M5*20 Round Screw, M4*5 Fasten Screw, etc.) are securely tightened.
3. Pasang Suku Pangrojong: Attach the three Support Feet to the base of the machine.
4. Install Y-Axis Timing Belts: Secure the Y-Axis Timing Belts as per the manual's instructions.
5. Mount Main Control Box: Attach the Main Control Box to the designated location on the frame.
6. Pasang modul laser: Carefully mount the 60W Laser Module onto the X-axis assembly. Ensure it is properly seated and secured.
7. Sambungkeun kabel: Connect the Main Cable, Power Adapter, and AC Cable. Route all cables neatly using the provided Cable Ties and the Cable Drag Chain.
8. Set up Air Assist: Connect the Air Assist Pump to the laser module and power supply as instructed in the Air Pump User Manual.
9. Place Honeycomb Panel: Position the Honeycomb Panel on your work surface, underneath the laser's working area, to protect your desktop and improve cutting results. Use the Desktop Protection Plate if needed.
10. Pamasangan parangkat lunak: Install the recommended laser control software (e.g., LightBurn, LaserGRBL) on your computer. Refer to the software's documentation for installation and basic usage.
11. Power-on mimiti: Connect the power adapter and turn on the machine. Observe for any unusual noises or movements.

6. Parentah Operasi

6.1. Persiapan Bahan

• Place your material on the Honeycomb Panel.
• Use the Red Cross Line Locating feature to accurately position your material.

6.2. Ngafokuskeun Laser

Achieving accurate focus is crucial for optimal engraving and cutting results. Refer to the K1 Max User Manual for detailed focusing procedures, typically involving adjusting the laser module height until the laser spot is at its smallest point on the material surface.

6.3. Adjusting Laser Power (20W/40W/60W)

The K1 MAX allows you to switch between 20W, 40W, and 60W power modes directly on the laser module. Select the appropriate power based on your material and desired outcome. Higher power is generally used for cutting thicker materials, while lower power is suitable for engraving and fine details.

Image: Visual representation of adjustable laser power settings and other features.

6.4. Using Air Assist

Connect and activate the Air Assist Pump when cutting or engraving materials that produce significant smoke or residue. Air assist helps to blow away debris, resulting in cleaner cuts and reduced charring.

6.5. Offline Engraving (TF Card)

To perform offline engraving:

1. Nyiapkeun desain Anjeun file using compatible software and save it to the TF card.
2. Insert the TF card into the Main Control Box.
3. Pilih anjeun file using the machine's controls (refer to the manual for specific navigation).
4. Start the engraving process without needing a connected computer.

6.6. Engraving and Cutting Process

1. Muat desain anjeun file into the laser control software or select it from the TF card.
2. Set the appropriate power, speed, and passes based on your material and desired effect. Refer to the cutting performance tables in the Specifications section for guidance.
3. Ensure all safety precautions are in place (goggles, ventilation).
4. Initiate the engraving/cutting job. Monitor the process closely.

Gambar: Visual examples of the K1 MAX's ability to cut various materials in a single pass.

7. Pangropéa

Pangropéa rutin ngajamin umur panjang sareng kinerja optimal tina engraver laser anjeun.

• Lensa Laser Bersih: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain beam quality.
• Rel sareng Sabuk Bersih: Keep the guide rails and timing belts free from dust and debris. Lubricate the rails as recommended in the manual.
• Clean Honeycomb Panel: Remove accumulated debris and cut pieces from the honeycomb panel to ensure proper airflow and prevent fire hazards.
• Pariksa sambungan: Regularly inspect all electrical and mechanical connections for tightness and wear.
• Apdet parangkat lunak: Keep your laser control software and firmware updated to the latest versions.

8. Cara ngungkulan

Masalah umum sareng Solusi:

9. Tips pamaké

• Rotary Attachment: The K1 MAX is designed for flat material processing. If you intend to engrave cylindrical objects like mugs, you may need to purchase a compatible rotary attachment separately. Check with the manufacturer or seller for recommended accessories.
• Uji Bahan: Always perform small test engravings or cuts on scrap material before starting a large project to fine-tune your power and speed settings.
• Air Assist for Cleanliness: For cleaner cuts and to minimize charring, especially on wood and acrylic, always use the air assist feature.
• Organisasi Ruang Kerja: Keep your workspace tidy and free of clutter to prevent accidents and ensure smooth machine operation.

10. Garansi jeung Rojongan

Garansi:

All LASER TREE products come with a garansi 1 taun ti tanggal dibeuli, ngawengku defects manufaktur sarta malfunctions dina pamakéan normal. Punten tahan bukti pameseran anjeun pikeun klaim garansi.

Rojongan Palanggan:

For any technical assistance, troubleshooting, or warranty inquiries, please contact the seller or manufacturer directly. All emails will typically be answered within 24 hours.

• Penjual: Laser Tree Retails Store
• Inpormasi kontak: Refer to your purchase platform or the official Laser Tree websitus pikeun detil kontak.