1. Bubuka
The SONICAKE QWS-10 is a 2.4G wireless audio system designed for high-impedance instruments such as electric guitars and bass. This system provides freedom of movement by eliminating the need for wired connections, making it ideal for practice, rehearsals, and small stage performances. It features low latency, high fidelity audio transmission, and a robust connection.
Figure 1: SONICAKE QWS-10 Wireless Guitar System (Transmitter and Receiver)
2. Produk Langkungview
Fitur konci:
- Sistem Audio Nirkabel 2.4G: Operates on the 2.4GHz ISM band for reliable wireless transmission.
- Latensi rendah: Achieves a delay of less than 5ms for real-time performance.
- Kasatiaan Tinggi: Offers a flat frequency response curve (20Hz-20kHz, +1.0/-1.0 dB) for accurate sound reproduction.
- Sambungan pinter: The transmitter automatically selects the best channel upon power-on.
- Papasangan otomatis: The receiver automatically connects to the transmitter for ease of use.
- rentang diperpanjang: Provides a transmission distance of 30 meters or more.
- Rojongan Multi-Receiver: One transmitter can support up to six receivers simultaneously.
- Batré anu tiasa dicas deui: Built-in lithium battery offers 5 hours or more of continuous use on a single charge.
- Desain awét: Features an ultra-durable rotating joint, tested for over 5000 rotations.
komponén:
The system includes one transmitter and one receiver unit. Each unit features a 1/4-inch (6.35mm) jack, a USB charging port, and indicator lights.
Figure 2: Low Latency (<5ms) Transmission
Figure 3: Smart Connection for Optimal Channel Selection
3. Setélan
- Charge the Units: Before first use, fully charge both the transmitter and receiver using the provided USB cable. The indicator light will show charging status and turn off or change color when fully charged.
- Sambungkeun pamancar: Plug the transmitter unit (marked 'TX') into your instrument's output jack (e.g., electric guitar, bass).
- Sambungkeun panarima: Plug the receiver unit (marked 'RX') into the input of your amplifier, pedalboard, or audio interface.
- Daya Hurung: Turn on both the transmitter and receiver units. The transmitter will automatically select the best available channel.
- Papasangan otomatis: The receiver will automatically connect to the transmitter. Indicator lights on both units will confirm a successful connection.
Figure 4: Connecting the Wireless System to Instrument and Amppangagung
4. Parentah Operasi
Operasi dasar:
- Pastikeun duanana unit dieusi sareng diaktipkeun.
- Verify the indicator lights confirm a stable connection.
- Adjust the volume on your instrument and amplifier as usual.
Multi-Receiver Setup (One-to-Many):
The QWS-10 system supports one transmitter broadcasting to a maximum of six receivers simultaneously. This is useful for scenarios where multiple amplifiers or monitoring systems need to receive the same instrument signal.
- Connect the transmitter to your instrument.
- Connect each receiver to its respective amplifier or audio input.
- Power on the transmitter first, then each receiver. All receivers will automatically connect to the single transmitter.
Note: This system does NOT support multiple transmitters connecting to a single receiver, or multiple transmitters operating simultaneously with multiple receivers in a complex setup. Only one transmitter can be active at a time for a given set of paired receivers.
Figure 5: One Transmitter Supporting Up to Six Receivers
5. Pangropéa
- Ngecas: Recharge the units when the battery indicator shows low power. Use the provided USB cable and a standard USB power adapter (not included). Avoid overcharging by disconnecting once fully charged.
- beberesih: Wipe the units with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Panyimpenan: Simpen sistem di tempat anu tiis sareng garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
- Joint Durability: The rotating joint is designed for durability, withstanding over 5000 rotations. Handle with care to prolong its lifespan.
Figure 6: Battery Life (5+ hours) and Durable Rotating Joint
6. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Taya sora atawa sora intermittent |
|
|
| Poor audio quality (noise, dropouts) |
|
|
| Units not charging |
|
|
7. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| Sampling Laju | 48kHz/24bit |
| Reureuh | 5ms |
| Jarak Pangiriman | ≥ 30m (line of sight) |
| Réspon Frékuénsi | 20Hz-20kHz, +1.0/-1.0 dB |
| THD+N | <0.05% @ 1kHz |
| Sinyal pikeun Rasio Noise | ≥ 80dB |
| Pita frékuénsi | 2.4 GHz ISM |
| Penanganan gangguan | Manual frequency hopping |
| Jenis Batré | Built-in rechargeable lithium battery 3.7V/mAh |
| Kahirupan batré | ≥ 5 hours on a single charge |
| Jumlah Saluran | 6 |
| Max Sets in Same Area | 6 susunan |
| Ukuran (W x D x H) | 70mm x 30mm x 13mm (Folded height: 25.3mm) |
| Beurat | 33g |
| Kaasup Asesoris | Owner's manual, USB cable |
Gambar 7: Dimensi Produk
8. Tips pamaké
- Penempatan optimal: For best performance, try to maintain a clear line of sight between the transmitter and receiver, especially in environments with potential interference.
- Kabiasaan ngecas: To maximize battery lifespan, avoid completely draining the battery frequently. Charge the units regularly.
- Testing Before Performance: Always test your wireless setup thoroughly in the intended environment before a performance or important session to identify and resolve any potential interference issues.
- Manajemén Saluran: If experiencing interference, try powering off and on both units to allow the transmitter to select a new, clearer channel.
9. Garansi jeung Rojongan
For warranty information, technical support, or service inquiries, please refer to the official SONICAKE websitus atanapi ngahubungan dealer otorisasi Anjeun. Simpen resi pameseran anjeun salaku bukti pameseran.
