Bubuka
Thank you for choosing the Joyroom JR-ZS330 Dashboard Car Phone Mount Holder. This manual provides essential information for the proper installation, operation, and maintenance of your device. Please read it carefully before use to ensure optimal performance and safety.
Figure 1: Joyroom JR-ZS330 Car Phone Mount Holder
Fitur konci
- Automatic Spring-Lock Design: Compatible with mobile phones with a thickness of 6-16mm.
- Bisa diatur Viewdina Angles: Features 360° rotation and 30° vertical angle adjustment to minimize reflection and provide the best viewsudut ing.
- Compact and Exquisite Design: Small 3-inch diameter base that does not obstruct your line of sight.
- Operasi hiji-leungeun: Designed for easy and convenient phone placement and removal.
- Adhesion kuat: Nano gel base ensures stability on flat surfaces, even during bumps or turns.
- Washable & Reusable Base: The nano gel base can be washed and reused without leaving adhesive marks.
- Manajemén Kabel: Integrated buckle design for convenient charging cable organization.
Figure 2: Compact and Exquisite Design with 3-inch Diameter Base
Parentah Setup
- Pilih Permukaan Datar: Select a clean, flat area on your car's dashboard for installation. This mount is not suitable for curved or excessively tilted surfaces.
- Ngabersihan permukaan: Thoroughly clean the chosen surface to remove any dust, dirt, or oils. Use a clean cloth for this step.
- Posisi Gunung: Place the Joyroom JR-ZS330 mount on the cleaned flat surface.
- Ngamankeun Gunung: Press down firmly on the mount to ensure strong adhesion.
- Allow Adhesion to Set: For optimal security, wait for at least 6 hours after installation before placing a phone in the mount.
Gambar 3: Léngkah-léngkah Pamasangan anu Gampang
Pertimbangan penting:
- Ensure the dashboard surface is flat. This product is not designed for curved surfaces.
- Avoid installing on dashboards with excessive tilt angles or stained surfaces, as this may compromise adhesion.
Figure 4: Surface Compatibility Guidelines
Parentah Operasi
- Placing Your Phone: Gently press the phone against the spring-loaded arms of the holder. The automatic spring-lock design will secure your phone in place.
- Nyaluyukeun Viewdina Angle:
- Rotasi: The base allows for 360° free rotation. Adjust the phone to your preferred horizontal or vertical orientation.
- adjustment nangtung: The holder also offers a 30° vertical adjustment to help avoid light reflection and achieve the best viewsudut ing.
- Charging Cable Management: Utilize the integrated cable management buckle to keep your charging cable tidy and prevent tangling.
Figure 5: 360° Rotation and 30° Vertical Adjustment
Figure 6: Cable Management Buckle Design
Kompatibilitas Telepon:
- The holder is compatible with phones ranging from 4.7 to 7 inches.
- The adjustable spring design accommodates phone thicknesses between 6-16mm, including most thick phone cases (e.g., popsocket, silicone, MagSafe, OtterBox). Note: May not be compatible with battery cases.
- The U-shaped design is compatible with pop grips.
Figure 7: Wide Compatibility for Phones and Thick Cases
Video 1: Product Demonstration and Installation Guide
Pangropéa
- Cleaning the Nano Gel Base: If the adhesion of the nano gel base weakens over time due to dust or dirt, simply wash it with water. Allow it to air dry completely before re-applying. The base is designed to be washable and reusable without leaving glue marks.
- beberesih umum: Ngusap gunung ku lemes, damp cloth to remove any surface dust or smudges. Avoid using harsh chemicals or abrasive materials.
Figure 8: Washable and Reusable Nano Gel Base
Pamérésan masalah
- Issue: Mount is not stable or falls off.
Mungkin sabab & Solusi:
- Surface is not flat: Ensure the mount is installed on a completely flat surface. It is not suitable for curved or excessively tilted dashboards.
- Surface was not clean: Re-clean the dashboard surface thoroughly to remove all dust, dirt, and oils before re-applying the mount.
- Insufficient setting time: Ensure you wait at least 6 hours after installation before using the mount to allow the adhesive to fully set.
- Nano gel base is dirty: Wash the nano gel base with water and let it air dry completely to restore its adhesion.
- Issue: Phone does not fit securely in the holder.
Mungkin sabab & Solusi:
- Phone size is outside compatibility range: Verify your phone's screen size is between 4.7 and 7 inches.
- Phone thickness exceeds limits: The holder accommodates phone thicknesses between 6-16mm. If your phone with its case is thicker, it may not fit. Note that battery cases might exceed this limit.
spésifikasi
| Atribut | Rincian |
|---|---|
| Ngaran Brand | Joyroom |
| Nomer modél | JR-ZS330 |
| Tipe | Panyekel Mobil |
| Bahan | ABS + PC |
| Brand cocog | Universal |
| Phone Size Compatibility | 4.7 - 7 inci |
| Phone Thickness Compatibility | 6 - 16 mm |
| Rotasi | 360° |
| Adjustment nangtung | 30° |
| Has Charger | No |
| Has Speaker | No |
| Ukuran produk (L x W x H) | 11 cm x 10 cm x 5 cm (kira-kira) |
| Beurat produk | 0.17 kg (kira-kira) |
Tip pamaké
- The mount supports both vertical and horizontal phone orientations due to its 360° rotation feature.
- It is designed to accommodate phones even with thick cases, thanks to its adjustable spring design (6-16mm thickness).
- While compatible with most phones (4.7-7 inches), larger devices like an iPad Mini are generally not supported.
Garansi sareng Rojongan
For any warranty claims or technical support, please contact the Joyroom Official Store or your point of purchase. Keep your purchase receipt as proof of purchase.
