1. Bubuka
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your BASENGREEN Wall-Mounted LiFePO4 Battery Module (BR-OW-LV Series). These high-performance lithium iron phosphate batteries are designed for home energy storage systems, offering a long cycle life and expandability for various power needs. Please read this manual thoroughly before installation and keep it for future reference.
2. Spésifikasi
The BASENGREEN BR-OW-LV series offers various capacities. Below are the detailed specifications:
| Fitur | BR-OW-LV 11.7kWh (230Ah) | BR-OW-LV 14.3kWh (280Ah) | BR-OW-LV 15.3kWh (300Ah) |
|---|---|---|---|
| Kimia batré | Lithium-iron Phosphate (LiFePO4) | ||
| Dipeunteun Voltage | 51.2V | ||
| Kapasitas | 230 Ah | 280 Ah | 300 Ah |
| Énergi | 11.77kWh | 14.33kWh | 15.36kWh |
| Max. Cont. Charge/Discharge Current | 200A | ||
| Ukuran (L * W * H) | 500 * 232 * 670 mm | 475 * 255 * 770 mm | |
| Beurat Perkiraan | 96kg | 112kg | |
| Sambungan Paralel | Support maximum 15 units in parallel | ||
| Suhu muatan | 0°C~60°C (Under 0°C, extra heating mechanism required) | ||
| Suhu Discharge | -20°C~60°C (Under 0°C, work with reduced capacity) | ||
| Suhu Panyimpenan | -40°C~55°C @ 60% ± 25% relative humidity | ||
| Inverters cocog | SMA, Victron Energy, Deye, Goodwe, Growatt, Sermatec, etc. | ||
| tampilan | SOC Status Indicator, LED Indicator | ||
| Komunikasi | RS485, RS232, BISA | ||
| Siklus Kahirupan | ≥6000 Siklus | ||
| Jangka waktu hirup | 15 Taun | ||
| Garansi | 5 Taun | ||
Note: Specifications are subject to change without prior notice. Contact the manufacturer for the latest compatible inverter list.
3. Produk Langkungview
3.1. Penampilan Umum
3.2. Struktur sareng Komponen Produk
- Sistem BMS: Protects the battery system from short circuit, overcharge, over-discharge, etc.
- Port Komunikasi: RS232/RS485/CAN for inverter communication.
- Battery Bracket: Wall-mounted, designed for easy installation and battery balance.
- Frosted Shell: Light, non-slip exterior.
- Roda: Easy to move the battery pack on the floor.
- Pamisah: Protects the battery pack, avoids short circuits.
- Copper Bus Bar: Ensures better stability and conductivity of the battery pack.
- 16S Good Quality Prismatic LiFePO4 Cells: High-quality battery cells.
- Panel hareup: Protects the structure for quick disassembly.
- Layar LCD: Displays battery and BMS basic information.
- Pindah: Turns the battery pack on/off.
3.3. Sambungan Terminal
The battery module features two types of terminal connections for robust and efficient power transfer:
- Stud Nuts Locking: Provides an easy-to-maintain connection.
- Laser Welding: Bus bars and terminals are directly welded to reduce internal resistance and enhance performance.
4. Setup jeung Instalasi
4.1. Instalasi fisik
The battery module is designed for wall-mounted installation. It also includes movable wheels for convenient positioning before final mounting.
4.2. Sambungan listrik
Connect the battery module to your home energy system components as illustrated in the diagram below. Ensure all connections are secure and follow local electrical codes.
- Connect the positive (P+) terminal (red) and negative (P-) terminal (black) of the battery to the corresponding terminals on your inverter.
- Ensure proper polarity to prevent damage to the battery or inverter.
4.3. Sambungan Komunikasi
The battery module supports RS485, RS232, and CAN communication protocols for integration with compatible inverters. Use the appropriate communication cables to connect the battery to your inverter's communication port.
- Set the correct DIP switch addresses (RST ADD) if multiple units are used in parallel or if required by your inverter's communication protocol.
4.4. Sambungan Paralel
The BR-OW-LV series battery modules can be connected in parallel to increase total energy storage capacity, supporting up to 15 units. Follow the diagram below for correct parallel wiring, ensuring all DC+, DC-, and communication lines are properly connected between units and to the inverter.
5. Parentah Operasi
5.1. Daya Hurung / Pareum
Locate the ON/OFF switch on the battery module's front panel. Press the switch to power the unit on or off.
5.2. LCD Screen Operation
The integrated LCD screen provides real-time information about the battery's status. Use the MENU, ENTER, and ESC buttons to navigate through the display options.
- Analog Info: Nembongkeun real-time voltage, current, cell temperatures (Temp01-Temp04), and individual cell voltages (Cell01-Cell04).
- Status BMS: Shows State of Charge (SOC), Full Capacity (FullCapa), Remaining Capacity (RemaCapa), and Cycle count. It also indicates the charge/discharge status (CHG/DSG: Idle, Charging, Discharging).
- AlarmProtect: Displays any active alarms or protection states (e.g., OVP for over-voltage panyalindungan).
- Para Settings / SYS Settings: These sections are typically for manufacturer use. A message "Non-Manufacturers Cannot enter the setting" will appear if access is attempted.
5.3. Battery Charging Process
The battery module is designed to integrate seamlessly with solar energy systems for efficient charging throughout the day.
6. Pangropéa
Proper maintenance ensures the longevity and optimal performance of your battery module.
- Panyimpenan: Store the battery in a dry and cool environment, within the specified storage temperature range of -40°C to 55°C at 60% ± 25% relative humidity.
- Manajemén Suhu:
- Ngecas: Ensure the ambient temperature is between 0°C and 60°C. If charging below 0°C, an extra heating mechanism is required.
- Discharger: The battery can discharge between -20°C and 60°C. However, performance and capacity will be reduced when operating below 0°C.
- Cék sambungan: Periodically inspect all electrical and communication connections to ensure they are tight and free from corrosion.
- Ngawaskeun: Regularly check the LCD screen for any abnormal readings or alarm messages. Address any warnings promptly.
- beberesih: Keep the exterior of the battery module clean and free from dust and debris. Use a dry, soft cloth for cleaning.
7. Cara ngungkulan
If you encounter issues with your BASENGREEN battery module, refer to the following common troubleshooting steps:
- Teu aya Daya / Teu aya tampilan:
- Check the ON/OFF switch to ensure the battery is powered on.
- Verify all power cables are securely connected.
- Pastikeun batre gaduh muatan anu cekap.
- Abnormal Readings on LCD:
- Navigate to the "BMS Status" and "AlarmProtect" sections on the LCD screen for specific error codes or warnings.
- Common alarms include over-voltage (OVP), handapeun-voltage (UVP), over-current (OCP), and over-temperature (OTP).
- Inverter Communication Issues:
- Ensure the correct communication cable (RS485, CAN, or RS232) is used and properly connected.
- Verify the DIP switch settings on the battery module match the inverter's requirements, especially in parallel configurations.
- Confirm the inverter is compatible with BASENGREEN batteries.
- Reduced Performance in Cold Weather:
- This is normal for LiFePO4 batteries. Ensure an extra heating mechanism is in place if charging below 0°C.
- Expect reduced discharge capacity below 0°C.
- Cannot Access Settings:
- The "Para Settings" and "SYS Settings" menus are restricted to manufacturers. If configuration changes are needed, please contact technical support.
If the problem persists after following these steps, please contact BASENGREEN technical support for assistance.
8. Tips pamaké
- Kasaluyuan Inverter: Always verify inverter compatibility with the seller or manufacturer before purchasing or installing the battery module to ensure seamless integration and optimal performance.
- Ukuran Sistim: When planning a parallel system, ensure all battery modules are of the same model and capacity for balanced operation.
- Kontrol Lingkungan: While the battery has a wide operating temperature range, maintaining it within moderate temperatures (e.g., 10-30°C) will maximize its lifespan and efficiency.
9. Garansi jeung Rojongan
9.1. Émbaran jaminan
BASENGREEN provides a jaminan kualitas 5 taun for its Wall-Mounted LiFePO4 Battery Modules. This warranty covers defects in materials and workmanship under normal use and service conditions.
9.2. Rojongan Téknis
BASENGREEN offers 100% technical support and after-sales service. For any technical inquiries, troubleshooting assistance, or warranty claims, please contact us:
- Surélék: 79998621@qq.com
- WhatsApp: +8618684521998
Please have your product model and any relevant error messages or observations ready when contacting support.
10. Patarosan anu Sering Ditaroskeun (FAQ)
- Q: What about the delivery time and shipping?
- A: Delivery from local warehouses (e.g., EU stock) typically takes 1-3 working days for estimated dispatch (ETD) with an estimated arrival time (ETA) of 5-7 working days via express. For transportation from China, the estimated dispatch time is 3-7 working days, with an estimated arrival time of 35-40 working days via rail/sea, often including DDP (Delivered Duty Paid) services.
- Q: Can I customize my logo?
- A: Yes, ODM/OEM service is supported. Our professional engineering team can provide solutions for custom branding.
- Q: Can these battery packs be compatible with my inverter? Do you have a compatible list?
- A: Yes, our battery packs are designed to be compatible with many well-known brands of inverters on the market. Please contact us directly to obtain the latest and most detailed compatible inverter list for your specific setup.
