Manual Instruksi Méja Tampilan Digital Pamindahan Grid Magnét TSUN MA08L

1. Produk Langkungview

The TSUN MA08L is a magnetic grid displacement digital display table designed for precise measurement and display of displacement in cutting machines and similar industrial applications. It features a high-contrast LCD display, multiple measurement modes, and robust construction for reliable performance in demanding environments.

2. Émbaran Kasalametan

• Always ensure the device is powered off before installation or maintenance.
• Ulah ngantepkeun unit ka kalembaban anu kaleuleuwihi atanapi suhu anu ekstrim.
• Handle the magnetic grid ruler and sensor head with care to prevent damage.
• Only use the specified power supply and matching magnetic grid ruler and sensor.

3. Instalasi jeung Setup

The MA08L digital display unit requires connection to a magnetic grid ruler and a sensor head for operation. Ensure all components are securely mounted and connected.

3.1 Komponén

• MA08L Digital Display Unit
• Magnetic Grid Ruler (required, typically sold separately)
• Sensor Head (required, typically sold separately)

3.2 Mounting the Magnetic Grid Ruler

The magnetic grid ruler is typically mounted along the axis of motion where displacement needs to be measured. Ensure it is securely fixed and straight to ensure accurate readings.

3.3 Installing the Sensor Head

The sensor head (e.g., OUNA MS-5000) reads the magnetic grid ruler. It should be mounted with a precise gap to the ruler, as specified by the sensor's manufacturer. Ensure the sensor is aligned correctly with the ruler.

3.4 Connecting the Display Unit

Connect the sensor head cable to the appropriate port on the MA08L display unit. Ensure the connection is secure. The unit typically connects to an external sensor via a dedicated cable.

3.5 suplai kakuatan

The MA08L operates on a DC 5V power supply. It also supports a built-in 3V battery (CR2032) for memory retention or backup. Ensure the correct power adapter is used.

4. Parentah Operasi

The MA08L features a user-friendly interface with a high-contrast LCD display and intuitive buttons.

4.1 Fungsi Tombol

• C (Clear): Resets the current display value.
• Panah luhur: Used for menu navigation or increasinnilai g.
• Panah katuhu: Used for menu navigation or moving cursor.
• Lebetkeun: Confirms selections or enters menu.
• Tombol Daya: Turns the unit ON/OFF.

4.2 Modeu pangukuran

• Absolute Measurement (ABS): Displays the absolute position relative to a set zero point.
• Relative Measurement (REL): Displays the relative displacement from a temporary zero point.
• Metric/Microswitch: Allows switching between metric (mm) and imperial (inch) units.

4.3 Parameter Nyetél

The unit supports multiple functional menus, allowing users to set parameters such as display resolution (10um, 50um, 100um, 1mm) and other configurations. Refer to the on-screen menu for detailed parameter adjustments.

4.4 Fitur tampilan

• High-contrast, large screen LCD display.
• LCD backlight for clear visibility in various lighting conditions.

5. Pangropéa

The MA08L is designed for durability and requires minimal maintenance.

• beberesih: Wipe the display unit and sensor with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• Panyalindungan: The unit offers high protection against oil and dust, ensuring reliable operation in industrial environments.
• Ngagantian batré: If the internal 3V battery (CR2032) needs replacement, ensure the unit is powered off and follow standard battery replacement procedures.
• Sensor and Ruler: Keep the magnetic grid ruler and sensor head clean and free from debris to maintain measurement accuracy.

6. Cara ngungkulan

If you encounter issues with your MA08L unit, consider the following common troubleshooting steps:

• No Display/Power:
  • Pariksa sambungan catu daya.
  • Pastikeun tombol daya dipencet.
  • Verify the internal 3V battery (CR2032) is correctly installed and has sufficient charge.
• Bacaan teu akurat:
  • Inspect the magnetic grid ruler for damage or debris.
  • Check the sensor head for proper alignment and correct gap to the ruler.
  • Ensure the sensor cable is securely connected to the display unit.
  • Verify the selected measurement resolution matches your application requirements.
• Tombol Unresponsive:
  • Check if the "buttons can be locked" feature is active. Refer to the operating section to unlock.
  • Restart the unit by powering it off and on.

Lamun masalah persist, kontak rojongan customer pikeun pitulung salajengna.

7. Spésifikasi

Below are the technical specifications for the TSUN MA08L Magnetic Grid Displacement Digital Display Table.

7.1 Ukuran

8. Tips pamaké

Bari euweuh ulang pamaké hususviews or Q&A were provided, general tips for using digital displacement displays include:

• Kalibrasi: Periodically check and recalibrate your system if high precision is critical.
• Lingkungan: Although robust, operating the unit within its specified temperature and humidity ranges will prolong its lifespan.
• Manajemén kabel: Ensure sensor cables are routed safely to avoid damage or interference.

9. Garansi jeung Rojongan

For technical support, warranty claims, or inquiries, please contact the manufacturer or seller using the information below.

JINAN OUNA ELECTRICAL AND MECHANICAL EQUIPMENT CO., LTD.

• Telepon: +86 18660126069
• Whatsapp: +8618660126069
• Surélék: redking2008@126.com
• Alamat: D12-103, Lanxiang Road Times Headquarters Base, Tianqiao District, Jinan City, Shandong Province