Launch BST-500 Battery Tester Instruction Manual

1. Bubuka

The Launch BST-500 Battery Tester is a professional diagnostic tool designed to accurately assess the health of 6V, 12V, and 24V lead-acid automotive batteries. It performs battery tests, cranking tests, and charging system tests, providing quick and reliable results. This manual will guide you through the proper use and maintenance of your BST-500 tester.

2. Fitur konci

• Lega Voltage Rentang: Tests 6V, 12V, and 24V batteries (operating voltage 6-30V).
• Broad CCA Range: Supports 100-2000 CCA.
• Multiple Battery Types: Compatible with VRLA, GEL, AGM Spiral, AGM Flat Plate, EFB, Regular Flooded, and Deep Cycle Batteries.
• Tés Komprehensif: Ngalakukeun Uji Batré, Uji Engkol, sareng Uji Sistem Ngecas.
• Gancang & Akurat: Delivers test results in approximately 3 seconds.
• Fitur kaamanan: Equipped with fully insulated alligator clips, spark-free operation, and reverse polarity protection.
• Gampang dianggo: Portable, easy to use, with a 2.4" LCD for clear display and guided operation.
• Uji Coba di Jero Kendaraan & di Luar Kendaraan: No need to remove the battery for testing.
• Rojongan multi-basa: Antarbeungeut basa Inggris.
• Kompensasi Suhu Otomatis: Ensures accurate readings across various environmental temperatures (-20~55°C / -4~131°F).

3. Setélan

1. Nyiapkeun batré: Pastikeun terminal batréna bersih sareng bébas tina korosi.
2. Nyambungkeun Clamps: Pasangkeun cl positif (+) beureumamp ka terminal batré positif sareng cl négatif (-) hideungamp to the negative battery terminal. The device features reverse polarity protection, but correct connection is always recommended.
3. Daya Hurung: The device will power on automatically once correctly connected to a battery.
4. Pilih Basa: If prompted, select 'English' using the navigation buttons and 'OK' button.

4. Parentah Operasi

Navigate through the menu using the 'MENU' and 'OK' buttons. The main menu typically offers 'Battery Test', 'Cranking Test', 'Charging Test', and 'Review Data'.

4.1. Tés Batré

Tés ieu meunteun kaséhatan batré sacara umum.

1. From the Main Menu, select 'Battery Test' and press 'OK'.
2. Follow the on-screen prompts. You may need to input the battery type (e.g., Flooded, AGM, GEL) and its CCA rating.
3. The tester will display results such as State of Health (SOH), State of Charge (SOC), Internal Resistance (R), and Voltage (V).
4. An indication like 'CHARGE-RETEST' suggests the battery needs charging before retesting.

4.2. Uji Cranking

This test analyzes the vehicle's starting system.

1. From the Main Menu, select 'Cranking Test' and press 'OK'.
2. Follow the on-screen instructions, which typically involve starting the vehicle's engine.
3. Alat panguji bakal ngukur voltase engkoltage and time, indicating if the starting system is functioning normally.

4.3. Ngecas Test

This test checks the vehicle's charging system (alternator).

1. From the Main Menu, select 'Charging Test' and press 'OK'.
2. Follow the on-screen instructions, which usually involve increasing the engine RPM to a specified level (e.g., 2500 RPM) and holding it for a few seconds.
3. The tester will analyze the charging voltage and ripple, determining if the charging system is operating correctly.

4.4. Review Data

pilihan ieu ngidinan Anjeun pikeun view the results of the latest test performed.

1. Tina Menu Utama, pilih 'Review Data' and press 'OK'.
2. The screen will display the most recent test results.

5. Pangropéa

• beberesih: Ngusap alat ku kaén anu lemes sareng garing. Ulah make cleaners abrasive atawa pangleyur.
• Panyimpenan: Store the BST-500 in a dry, cool environment, away from direct sunlight and extreme temperatures.
• Perawatan kabel: Pariksa kabel uji sareng clampPariksa sacara rutin pikeun ningali tanda-tanda karusakan. Ganti upami diperyogikeun.
• Battery (Internal): The device is powered by the vehicle's battery during testing and does not require internal batteries.

6. Cara ngungkulan

• Alat teu hurung: Pastikeun clamps are securely connected to the battery terminals. Check for sufficient battery voltage (minimum 6V).
• Henteu aya bacaan atanapi bacaan anu teu akurat: Clean the battery terminals and re-attach the clamps firmly. Ensure the correct battery type and CCA are entered if prompted.
• 'CHARGE-RETEST' message: The battery's state of charge is too low for an accurate test. Charge the battery fully and retest.
• Layar beku: Disconnect the device from the battery, wait a few seconds, and reconnect.

7. Spésifikasi

8. Tips pamaké

• For the most accurate readings, always ensure the battery terminals are clean and free of any corrosion or debris before connecting the tester.
• Follow the on-screen prompts carefully during each test. The device is designed to guide you through the process.
• If testing a battery that has recently been charged or discharged, allow it to rest for a few minutes before testing to get a more stable reading.
• Store the BST-500 in its original packaging or a protective case when not in use to prevent damage.

9. Garansi jeung Rojongan

This product comes with a standard manufacturer's warranty. For warranty claims, technical support, or service inquiries, please refer to the contact information provided by your original point of purchase or the official LAUNCH support channels. Keep your purchase receipt as proof of purchase.