1. Bubuka
The Haozee Tuya WiFi Smart Carbon Monoxide Detector Alarm is designed to monitor carbon monoxide (CO) concentrations in your environment 24 hours a day. This device provides an audible and visual alarm when CO levels reach a dangerous threshold, ensuring the safety of your home and family. Featuring an LCD display for real-time concentration readings and smart connectivity via the Smart Life/Tuya Smart app, it offers peace of mind through continuous monitoring and remote alerts.
2. Fitur Produk
- WiFi + Bluetooth Dual Mode: Offers faster network connection, utilizing Bluetooth for initial signal connection and WiFi for stable, continuous operation.
- Loud Audible and Visual Alarm: When dangerous CO levels are detected, a red LED flashes and a loud alarm (≥ 70dB/1M) sounds to alert occupants.
- Pangimeutan jauh: Real-time carbon monoxide concentration (PPM) can be viewed and monitored through the Smart Life/Tuya Smart mobile application.
- Visible LCD Display: A 3-digit display shows the current CO concentration, providing an intuitive visual reading.
- Pamasangan Gampang: Designed for wall mounting, it can be fixed using double-sided tape or screws.
- Low Voltage Panginget: Automatically notifies you when battery levels are low, prompting replacement.
- Sensitive Response: Quickly detects changes in carbon monoxide levels.
- Fault Self-Test: Built-in diagnostic function to ensure proper operation.
- Bahan Tahan Seuneu: Constructed from materials designed for enhanced safety.
3. Setup jeung Instalasi
3.1 Powering On
The detector is powered by two (2) LR6-AA batteries (not included). To install, slide to remove the back cover, insert the batteries, and then replace the cover.
Upon initial power-on, all indicator lights will briefly turn on and then off. The green indicator light will flash every second, and the screen will display a 120-second countdown. After the countdown, the flashing stops, and the screen will show "0 ppm." The green indicator light will then flash once every 40 seconds, indicating normal operation.
3.2 Sambungan Jaringan
The device supports 2.4G WiFi networks only; 5G networks are not supported. For optimal performance, ensure the installation location has a stable network environment.
- For the first-time connection, it is recommended to use new batteries.
- Turn on Bluetooth on your mobile phone when connecting to the internet. The WiFi + Bluetooth dual mode allows for a faster and more stable connection.
- Download and install the Smart Life or Tuya Smart application on your smartphone.
- Follow the in-app instructions to add and connect your Carbon Monoxide Detector.
3.3 Pasang Alat
The detector is designed for wall mounting. It can be securely fixed using double-sided tape or the included screws. The back of the device features dedicated wall mounting holes for easy installation.
3.4 Disarankeun panempatan
It is recommended to install carbon monoxide alarms in areas where air is not circulated for a long time, such as kitchens, bathrooms, and living rooms. Avoid placing it directly above heat sources or in areas with strong drafts.
4. Operasi
4.1 Operasi normal
In normal operating conditions, the screen will display "0 ppm," and the green indicator light will flash once every 40 seconds.
4.2 Kaayaan Alarm
If the carbon monoxide concentration in the environment exceeds the preset alarm value (128ppm ± 50ppm), the red indicator light will blink, and a continuous beeping sound will be emitted. The alarm will continue until the CO concentration drops back to "0 ppm." If connected to the network, the mobile application will also receive an alarm message.
4.3 Testing the Device
To test the alarm function:
- Press the test button on the device. The green and yellow lights will turn on, the red light will blink, and the buzzer will sound a beep, confirming the alarm is functional.
- For a user test of CO detection, you can light a cigarette and allow the smoke to enter the product. After a moment, the screen will display the CO concentration value. If it exceeds the set alarm value, an alarm will sound, and the red indicator light will flash simultaneously.
5. Pangropéa
5.1 Ngagantian batré
The device will automatically provide a low voltage reminder when the battery level is low. Replace the two (2) LR6-AA batteries promptly to ensure continuous protection. The device is designed for low power consumption, allowing for approximately one year of standby time with two new batteries.
5.2 beberesih
Regularly clean the exterior of the detector with a soft, dry cloth. Do not use cleaning agents or solvents, as these may damage the device or interfere with sensor operation.
6. Cara ngungkulan
- Device displays "ERR": This indicates a malfunction with the CO sensor. The orange indicator light will flash twice every 40 seconds, and the buzzer will beep twice. If this occurs, the device may need to be replaced.
- No alarm during high CO concentration: Ensure batteries are fresh and correctly installed. Perform a manual test using the test button. If the issue persists, the sensor may be faulty.
- Teu bisa nyambung ka WiFi:
- Verify your WiFi network is 2.4G, not 5G.
- Ensure your phone's Bluetooth is enabled during the connection process.
- Confirm the installation location has a stable WiFi signal.
- Coba nganggo batré anyar pikeun sambungan awal.
- Alarm palsu: Ensure the detector is not placed too close to sources of combustion or in areas with high humidity or extreme temperatures outside its operating range.
7. Spésifikasi
| Parameter | Nilai |
|---|---|
| Masukan Voltage | DC3V LR6-AA * 2 |
| Arus Tenang | ≤55uA |
| Alarm Ayeuna | ≤160mA |
| Low Power Undervoltage | ≤2.4V |
| WiFi Standar | 802.11 b/g/n |
| Gas anu tiasa dideteksi | Karbon Monoksida (CO) |
| Alarm Set Value | 128ppm (± 50ppm) |
| Sora Alarm | ≥ 70dB/1M |
| Modeu alarem | Sound and Flash Alarm |
| Métode Pamasangan | Pamasangan témbok |
| Suhu Gawé | -10 ℃ nepi ka 55 ℃ |
| Kalembaban Gawé | Nepi ka 95% RH |
| Bewara Alarm | Dorongan bewara aplikasi telepon sélulér (Smart Life/Tuya Smart) |
| Diménsi | 90mm (Diaméterna) * 33mm (Katebalan) |
8. Tips pamaké
- Kasaluyuan Aplikasi: The device is compatible with the Smart Life and Tuya Smart applications, allowing for seamless integration into your smart home ecosystem.
- Jaringan Stabil: Always ensure the detector is installed in an area with a strong and stable 2.4G WiFi signal for reliable remote monitoring and notifications.
- New Batteries for Setup: When connecting the device to your network for the first time, using new batteries can help ensure a smooth and successful pairing process.
- Bluetooth pikeun Nyapasangkeun: Remember to enable Bluetooth on your phone during the initial network connection phase to leverage the device's dual-mode capabilities for faster setup.
9. Garansi jeung Rojongan
For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt for warranty validation.
