AERMOTOR V410 OBD2 Car Diagnostic Tool User Manual

1. Bubuka

The AERMOTOR V410 is a professional automotive diagnostic tool designed to quickly read and clear vehicle fault information and parameters. This plug-and-play scanner supports nine standard OBD II/EOBD protocols, making it a comprehensive solution for diagnosing 12V gasoline and diesel vehicles. It operates independently without the need for a computer or mobile phone, featuring a high-resolution LCD display for clear data presentation.

This manual provides detailed instructions for setting up, operating, and maintaining your V410 diagnostic tool. Please read it carefully before use to ensure proper and safe operation.

2. Fitur konci

• Operasi mandiri: No external computer or mobile device required.
• Kasaluyuan kandaraan lega: Supports 12V gasoline and diesel vehicles, including all 1996 and newer OBDII & CAN compliant vehicles in the USA, most 2003 and newer EOBD compliant vehicles in the EU, and 2007 and newer Asian car brands.
• Fungsi Komprehensif: Offers a wide range of diagnostic capabilities.
• Rojongan multi-basa: Available in English, German, Italian, Dutch, French, Spanish, Chinese, and Russian.
• LCD resolusi luhur: Nyayogikeun inpormasi diagnostik anu jelas sareng gampang dibaca.
• Gampang dianggo: Designed for ease of use, even for beginners.

Fungsi anu dirojong:

• Read Diagnostic Trouble Codes (DTCs)
• Hapus Kodeu Masalah Diagnostik (DTC)
• View Real-Time Data Stream
• Read Vehicle Fault Freeze Frame Data
• Perform Oxygen Sensor Test
• Pariksa Status Kesiapan I/M
• Conduct EVAP System Test
• Read Battery Voltage
• Display Data Flow Curve (Real-Time Graph)
• Retrieve Vehicle Information (VIN, CIN, CVN)

3. Setup jeung Connection

The AERMOTOR V410 is designed for simple plug-and-play operation. Follow these steps to connect the device to your vehicle:

1. Manggihan Port OBD2: The 16-pin Data Link Connector (DLC) is usually located under the dashboard on the driver's side of the vehicle. Refer to your vehicle's owner's manual if you cannot find it.
2. Sambungkeun scanner: With the vehicle's ignition off, firmly plug the V410's OBD2 connector into the vehicle's DLC.
3. Daya Hurung: Turn the vehicle's ignition to the 'ON' position (do not start the engine). The V410 scanner will automatically power on and initiate communication with the vehicle's onboard computer.
4. Pilihan Basa: If prompted, select your preferred language from the available options (English, German, Italian, Dutch, French, Spanish, Chinese, Russian).

4. Parentah Operasi

Once connected and powered on, the V410 will display the main menu. Use the directional buttons (UP, DOWN, LEFT, RIGHT) and the OK button to navigate through the menus and select functions.

4.1. Maca Kode Masalah Diagnostik (DTCs)

This function allows you to retrieve stored, pending, and permanent diagnostic trouble codes from the vehicle's engine control unit (ECU).

1. From the main menu, select "Read Code" or "DTC Lookup".
2. The scanner will display any detected DTCs along with their definitions.
3. Use the UP/DOWN buttons to scroll through multiple codes if present.

4.2. Ngabersihkeun Kodeu Masalah Diagnostik (DTC)

After addressing the underlying issue that caused the fault codes, you can clear them from the vehicle's memory. This will also turn off the Check Engine Light (MIL).

1. From the main menu, select "Clear Code" or "Erase Code".
2. Konfirmasi pilihan anjeun nalika dipenta.
3. The scanner will attempt to clear the codes. A confirmation message will appear upon success.

Warning: Do not clear codes before diagnosing and fixing the underlying problem. Clearing codes without repair may lead to further damage or safety issues.

4.3. Real-Time Data Stream

This function displays live data parameters from the vehicle's sensors and components, such as engine RPM, vehicle speed, oxygen sensor readings, and more.

1. From the main menu, select "Data Stream".
2. The scanner will display a list of available data parameters.
3. Use the UP/DOWN buttons to scroll through the list. You can select specific parameters to view in detail or as a graph.

4.4. Freeze Data pigura

Freeze Frame Data records a snapshot of the vehicle's operating conditions at the moment a fault code was set. This can help in diagnosing intermittent problems.

1. From the main menu, select "Fault Freeze Frame".
2. The scanner will display the recorded parameters.

4.5. Status Kesiapan I/P

I/M Readiness indicates whether the various emissions-related systems on the vehicle are operating correctly and have completed their diagnostic tests. This is crucial for emissions inspections.

1. From the main menu, select "I/M Ready State".
2. The scanner will display the status of each monitor (e.g., O2 Sensor Monitor, EVAP System Monitor) as 'OK' or 'INC' (Incomplete).

4.6. Batré Voltage Bacaan

Pantau voltase batré kandaraan anjeuntage sacara real-time.

1. From the main menu, select "Battery Voltage Reading".
2. Vol batré ayeunatage bakal dipintonkeun.

4.7. Real-Time Graph

Visualize selected live data parameters as a graph for easier analysis of trends and fluctuations.

1. Sedengkeun viewing "Data Stream", select a parameter and choose the graphing option.
2. The scanner will display the data graphically.

4.8. Émbaran kandaraan

Access important vehicle identification details.

1. From the main menu, select "Vehicle Information".
2. The scanner will display information such as Vehicle Identification Number (VIN), Calibration ID (CALID), and Calibration Verification Number (CVN).

5. Pangropéa sarta perawatan

To ensure the longevity and optimal performance of your AERMOTOR V410 diagnostic tool, follow these maintenance guidelines:

• beberesih: Anggo kaén anu lemes sareng garing pikeun ngabersihan alat. Ulah make cleaners abrasive atawa pangleyur.
• Panyimpenan: Store the device in a dry, cool place, away from direct sunlight and extreme temperatures. The recommended storage temperature is -30°C to 70°C (-22°F to 158°F).
• Penanganan: Hindarkeun ngaragragkeun alatna atanapi mangaruhan kana tabrakan anu kuat.
• Perawatan kabel: Do not pull on the cable to disconnect the device. Always grasp the connector firmly.

6. Cara ngungkulan

If you encounter issues while using your AERMOTOR V410, refer to the following common problems and solutions:

• Alat teu hurung:
  • Ensure the OBD2 connector is securely plugged into the vehicle's DLC.
  • Pastikeun konci kontak kendaraan aya dina posisi 'ON'.
  • Check the vehicle's battery for sufficient charge (the device draws power from the vehicle).
• Kasalahan komunikasi sareng kendaraan:
  • Confirm your vehicle is OBDII/EOBD compliant (generally 1996 and newer for USA, 2003+ for EU, 2007+ for Asia).
  • Ensure the connection is firm. Disconnect and reconnect the scanner.
  • Try the scanner on another compatible vehicle to rule out a vehicle-specific issue.
• Layar kosong atanapi beku:
  • Pegatkeun sambungan alat tina kendaraan teras sambungkeun deui.
  • Upami masalahna tetep, hubungi dukungan palanggan.
• Basa anu salah ditampilkeun:
  • Navigate to the device's settings menu to change the language.

7. Spésifikasi

8. Tips pamaké

• For optimal performance, ensure your vehicle's battery is adequately charged before performing diagnostics.
• Always consult your vehicle's service manual for specific diagnostic procedures and fault code interpretations relevant to your car model.
• While the V410 can clear fault codes, it's crucial to identify and fix the root cause of the problem to prevent recurrence.

9. Garansi jeung Rojongan

Kanggo inpormasi garansi, dukungan téknis, atanapi patarosan jasa, mangga tingal dokuméntasi anu disayogikeun sareng pameseran anjeun atanapi langsung ngahubungi penjual. Simpen bukti pameseran anjeun pikeun klaim garansi.