Scimagic-RC SMG-2023

Scimagic-RC SMG-2023 Remote Control Instruction Manual

Model: SMG-2023 | Brand: Scimagic-RC

Bubuka

This manual provides comprehensive instructions for the Scimagic-RC SMG-2023 remote control. Designed for compatibility with specific HORMANN 868MHz BiSecur garage door opener models, this guide will help you understand its features, set it up, operate it effectively, and maintain it for long-lasting performance.

Model cocog

The SMG-2023 remote control is designed to be compatible with the following HORMANN 868MHz BiSecur models:

  • HORMANN HS1-868-BS
  • HORMANN HS4-868-BS
  • HORMANN HS5-868-BS
  • HORMANN HSE1-868-BS
  • HORMANN HSE2-868-BS
  • HORMANN HSE4-868-BS
  • HORMANN HSP4-868-BS
  • HORMANN HSD2-868-BS
  • HORMANN HSS4-868-BS

Disclaimer: Your existing remote control must visually match the product images provided, and your model must be explicitly listed above for compatibility. Incorrect purchases due to model mismatch are not the responsibility of the seller.

SMG-2023 remote control shown alongside various compatible HORMANN BiSecur remotes.
The SMG-2023 remote control (top) and a selection of compatible HORMANN BiSecur remotes.
Close-up of various HORMANN BiSecur remotes with model numbers highlighted.
Ensure your existing remote's model number matches one of the compatible models shown.
Diwincik view of model numbers on original HORMANN remotes: HSE2-868-BS, HS4-868-BS, HS5-868-BS.
Examples of model numbers on original HORMANN remotes.

Spésifikasi produk

FiturSpésifikasi
ModélSMG-2023
merekScimagic-RC
BahanLogam jeung ABS
Kancing4 Kancing
Frékuénsi868MHz
BatréKaasup
Jarak50m-200m (Open area)
AsalnaDaratan Cina
SertifikasiCE
Dimensions of the SMG-2023 remote control.
Dimensions of the SMG-2023 remote control: 60mm x 35mm x 15mm (body), 125mm total length with keychain, 75mm body length.

Naon Kaasup

Paket anjeun kedah ngandung barang-barang ieu:

  • 1 x SMG-2023 Remote Control
  • 1 x Batré (tos dipasang atanapi misah)
  • 1 x Buku Panduan Bahasa Inggris

Setup jeung Programming

The SMG-2023 remote control supports two primary methods for setup: face-to-face cloning and programming directly with your receiver. For detailed visual guidance on handling the remote and basic operation, please refer to the product video below. If you require specific programming instructions, please contact customer support for a learning video.

Video demonstrating the physical features and button operation of the SMG-2023 remote control.

Face-to-Face Cloning

This method typically involves placing your original remote and the new SMG-2023 remote in close proximity and following a sequence of button presses to transfer the code. Specific steps vary by original remote model; consult the learning video or customer support for precise instructions.

Programming with the Receiver

This method involves accessing the programming mode on your garage door opener's receiver unit and then activating the new SMG-2023 remote to pair it. Refer to your garage door opener's manual for instructions on how to put the receiver into programming mode.

Hareupeun view of the SMG-2023 remote control with a keychain.
Hareupeun view of the SMG-2023 remote control.
Hareupeun view of the SMG-2023 remote control with its sliding cover open, revealing five buttons.
The SMG-2023 remote control with its protective sliding cover open, showing the five control buttons.

Parentah Operasi

Once programmed, operating the SMG-2023 remote control is straightforward:

  1. Slide the protective cover down to reveal the buttons.
  2. Press the desired button corresponding to the function you wish to activate (e.g., open/close garage door).
  3. The blue indicator light will illuminate when a button is pressed, confirming signal transmission.
  4. Release the button once the desired action is initiated.
  5. Slide the protective cover back up to prevent accidental presses and protect the buttons.
Hand pressing a button on the SMG-2023 remote control, showing the blue indicator light.
Pressing a button on the remote control activates the blue indicator light.

Pangropéa

To ensure optimal performance and longevity of your SMG-2023 remote control, follow these maintenance guidelines:

  • beberesih: Lap remot ku lawon anu lemes sareng garing. Ulah nganggo bahan kimia anu keras atanapi pembersih anu abrasif.
  • Ngagantian batré: If the remote's range decreases significantly or the indicator light becomes dim, it may be time to replace the battery. Refer to the internal English instruction manual for battery type and replacement procedure.
  • Panyimpenan: Simpen remote di tempat anu garing, jauh tina suhu anu ekstrim sareng sinar panonpoé langsung.
  • Perlindungan: Keep the sliding cover closed when not in use to protect the buttons from dust, dirt, and accidental activation.

Pamérésan masalah

If you encounter issues with your remote control, consider the following:

  • Jauh Teu Gawé:
  • Check if the battery is dead or low. Replace if necessary.
  • Ensure the remote is properly programmed to your receiver. Re-program if unsure.
  • Verify that your garage door opener is receiving power and functioning correctly.
  • Rentang ngurangan:
  • Ganti batréna.
  • Pastikeun teu aya halangan antara remot sareng panarima.
  • Pariksa sumber gangguan radio di daérah éta.
  • Aktipkeun teu kahaja:
  • Always keep the sliding cover closed when not actively using the remote.

Upami masalah masih aya saatos nyobian léngkah-léngkah ieu, mangga ngahubungi dukungan palanggan kanggo bantosan salajengna.

Garansi sareng Rojongan

Your Scimagic-RC SMG-2023 remote control comes with the following assurances:

  • Pamastian kualitas: The product is backed by professional certifications, ensuring its quality and reliability.
  • Garansi 1 Taun: Enjoy a 1-year warranty from the store against manufacturing defects.
  • Kawijakan Balik 7 Dinten: If you encounter any quality problems within 7 days of receipt, you are eligible for a return.
  • Fast Delivery & Refund Guarantees:
  • Uang kembalian jika paketnya hilang.
  • Uang kembali jika barang rusak saat sampai.
  • Ngabalikeun duit upami teu aya pangiriman dina 30 dinten.
  • Rojongan Palanggan: Sadaya patarosan via email bakal diwaler dina 24 jam.
Collection of product certification documents including RoHS, CE, and FCC.
Product certifications demonstrating quality and compliance.
Additional product certification documents.
Further certification details.

Scimagic-RC SMG-2023 Multi-Button Wireless Remote Control Key Fob Overview

Scimagic-RC SMG-2023 Multi-Button Wireless Remote Control Key Fob Overview

0:24 • 1280 × 720 • visual_overview
Scimagic-RC SMG-2023 Universal Remote Control Visual Overview

Scimagic-RC SMG-2023 Universal Remote Control Visual Overview

0:24 • 1280 × 720 • visual_overview

Dokumén Patali - SMG-2023

Praview Scimagic-RC HORMANN Garage Remote 868.35MHZ User Manual
Comprehensive user manual for the Scimagic-RC HORMANN Garage Remote 868.35MHZ. Learn about product features, specifications, operation, maintenance, and troubleshooting.
Praview Scimagic-RC Radio Receiver Programming Guide
Instructions for programming Scimagic-RC radio transmitters to your operator, including steps for coding hand transmitters.
Praview Product Manual: Remote Control Programming Guide
Concise guide on programming a new remote control to a receiver, covering different methods and troubleshooting tips. Includes instructions in multiple languages.
Praview Scimagic-RC DEA 868 GTI2/GTI4 Garage Door Remote Control Transmitter User Manual
User manual for the Scimagic-RC DEA 868 GTI2 and GTI4 868MHz garage door remote control transmitters. Learn how to operate and program your device for garage doors, gates, and barriers.
Praview Scimagic-RC SMG-008 Universal Remote Control Programming Guide
Comprehensive guide to programming the Scimagic-RC SMG-008 universal remote control. Covers fixed code duplication, rolling code duplication, and auto-matching procedures with step-by-step instructions.
Praview SMG-8112 Smart Receiver Instruction Manual
Instruction manual for the SMG-8112 smart receiver by Scimagic-RC. Details parameters, setup checklist, user guide for Tuya Smart app, features, and compatibility with 433MHz fixed, learning, and rolling code remote controls.